Description : The network layer is considered as the _______? A. Backbone B. packets C. Bytes D. bits
Last Answer : A. Backbone
Description : Transport layer receives data in the form of? A. Packets B. Byte streams C. Bits stream D. both packet and Byte stream
Last Answer : B. Byte streams
Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes
Last Answer : c. packets
Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes
Last Answer : C. packets
Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes
Last Answer : c) packets
Description : Network layer protocol exits in_____? A. Host B. Switches C. Packets D. Bridges
Last Answer : A. Host
Description : ____________ protocols provide end to end message transfer capability independent of the underlying network. A. Network layer B. Transport layer C. Application layer D. Link layer
Last Answer : B. Transport layer
Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : A. Application layer
Description : _____________ layer protocols determine how the data is physically sent over the network’s physical layer or medium. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : D. Link layer
Description : The network layer consists of which hardware devices? A. Router B. Bridges C. Switches D. All of the above
Last Answer : D. All of the above
Description : Security based connection is provided by which layer? A. Application layer B. Transport layer C. Session layer D. Network layer
Last Answer : D. Network layer
Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : C. Network layer
Description : ______ layer is responsible for sending of IP datagrams from the source network to the destination network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : The correct answer is: C. Network layer The network layer is responsible for routing and forwarding IP datagrams from the source network to the destination network. It provides logical addressing ... at the network layer include IP (Internet Protocol) and ICMP (Internet Control Message Protocol).
Description : What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits
Last Answer : C. 128 bits
Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these
Last Answer : c. Both a and b
Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP
Last Answer : d. HTTP
Description : Using which layer in transport layer data integrity can be assured? A. Checksum B. Repetition codes C. Cyclic redundancy checks D. Error correction codes
Last Answer : A. Checksum
Description : Which one out of these is not a data link layer technology? A. Bluetooth B. UART C. Wi-Fi D. HTTP
Last Answer : D. HTTP
Description : ______________ is useful for time-sensitive application that have very small data units to exchange and do not want the overhead of connection setup. A. TCP B. UDP C. Transport layer D. None of the above.
Last Answer : B. UDP
Description : Interconnection of Internet and computing devices embedded in everyday objects, enabling them to send and receive data is called_____________ A. Internet of Things B. Network Interconnection C. Object Determination D. None of these
Last Answer : A. Internet of Things
Description : Which of the following is (are) example(s) of embedded system for data communication? USB Mass Storage device A. Network router B. Digital camera C. Music player D. All of these E. None of these
Last Answer : B. Digital camera
Description : ____________ refers to establish a proper connection between all the things of IOT. A. Connectivity B. Analyzing C. Sensing D. Active Engagement
Last Answer : A. Connectivity
Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes
Last Answer : (4) 5 bytes
Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000
Last Answer : d. 20000
Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport
Last Answer : a. Session
Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP
Last Answer : d. UDP
Description : Services provided by application layer? A. Web chat B. Error control C. Connection services D. Congestion control
Last Answer : A. Web chat
Description : _____________ is a collection of wired Ethernet standard for the link layer. A. IEEE 802.3 B. IEEE 802.11 C. IEEE 802.16 D. IEEE 802.15.4
Last Answer : A. IEEE 802.3
Description : WSN stands for A. Wide Sensor Network B. Wireless Sensor Network C. Wired Sensor Network D. None of these
Last Answer : B. Wireless Sensor Network
Description : TCP and UDP are called? A. Application protocols B. Session protocols C. Transport protocols D. Network protocols
Last Answer : C. Transport protocols
Description : Which protocol is used to link all the devices in the IoT? A. TCP/IP B. Network C. UDP D. HTTP
Last Answer : A. TCP/IP
Description : What does HTTP do? A. Enables network resources and reduces perception of latency B. Reduces perception of latency and allows multiple concurrency exchange C. Allows multiple concurrent ... D. Enables network resources and reduces perception of latency and Allows multiple concurrent exchange.
Last Answer : D. Enables network resources and reduces perception of latency and Allows multiple concurrent exchange.
Description : 6LOWPAN stands for A. 6 LOW Personal Area Network B. IPv6 LOW Personal Area Network C. IPv6 over Low power wireless personal area network D. None of above
Last Answer : C. IPv6 over Low power wireless personal area network
Description : Consider a source computer(S) transmitting a file of size 106 bits to a destination computer (D)over a network of two routers (R1 and R2) and three links(L1, L2, and L3). L1connects S to R1; L2 connects R1 to ... file from S to D? a. 1005 ms b. 1010 ms c. 3000 ms d. 3003 ms Answer: Option(a)
Last Answer : a. 1005 ms
Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer
Last Answer : a) network layer
Description : Properties of IoT devices. A. Sense B. Send and receive data C. Both A and B D. None of above
Last Answer : C. Both A and B
Description : The collection of data is achieved with ________ changes. A. Intelligence B. Connectivity C. Dynamic Nature D. Enormous Scale
Last Answer : C. Dynamic Nature
Description : The process of collecting, organizing and collecting large sets of data called as A. WSN B. Cloud Computing C. Big Data D. None of above
Last Answer : C. Big Data
Description : ____ is a transformative computing paradigm that involves delivering applications and services over the internet. A. WSN B. Cloud Computing C. Big Data D. None of above
Last Answer : B. Cloud Computing
Description : ____ is a data-centric middleware standard for device-to-device and machine-to-machine communication. A. Data Distribution Serviced (DDS) B. Advance Message Queuing Protocol (AMQP) C. Extensible Messaging and Presence Protocol (XMPP) D. Message Queue Telemetry Transport (MQTT)
Last Answer : A. Data Distribution Serviced (DDS)
Description : XMPP creates _________ identity. A. Device B. Email C. Message D. Data
Last Answer : A. Device
Description : MQTT is better than HTTP for sending and receiving data. A. True B. False
Last Answer : A. True
Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s
Last Answer : C. 1 Mb/s to up to 6.75 Gb/s
Description : The sensed data communicated ___________________. A. Cloud-based servers/storage. B. I/O interfaces. C. Internet connectivity. D. None of the above
Last Answer : A. Cloud-based servers/storage.
Description : Harvard architecture allows: A. Separate program and data memory B. Pipe-ling C. Complex architecture D. All of the mentioned
Last Answer : D. All of the mentioned
Description : Which architecture provides separate buses for program and data memory? A. Harvard architecture B. Von Neumann architecture C. None of the mentioned D. All of the mentioned
Last Answer : A. Harvard architecture
Description : A digital multi meter is an example of an embedded system for A. Data communication B. Monitoring C. Control D. All of these E. None of these
Last Answer : B. Monitoring
Description : What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above
Last Answer : D .All of the above
Description : Which of the following is an (are) an intended purpose(s) of embedded systems? A. Data collection B. Data processing C. Data communication D. All of these E. None of these
Last Answer : D. All of these
Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer
Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter