Description : ___________ manages the switching function in GSM. a) BSS b) NSS c) OSS d) MSC
Last Answer : c) OSS
Description : Which of the following subsystem provides radio transmission between mobile station and MSC? a) BSS b) NSS c) OSS d) BSC
Last Answer : a) BSS
Description : Which of the following does not come under subsystem of GSM architecture? a) BSS b) NSS c) OSS d) Channel
Last Answer : d) Channel
Description : At the base station, the air interface portion of mobile transmission is passed to MSC. a) True b) False
Last Answer : b) False
Description : In a wireless communication, base station is connected to central hub called _______ a) PSTN b) MSC c) CO d) PBX
Last Answer : b) MSC
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS
Last Answer : c) PDC
Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile
Last Answer : c) Group Special Mobile
Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK
Last Answer : a) GMSK
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : Which one is not a TDMA standard of second generation networks? a) GSM b) IS-136 c) AMPS d) PDC
Last Answer : c) AMPS
Description : How much increase in spectral efficiency is provided by W-CDMA in comparison to GSM? a) Two times b) Three times c) No increase d) Six times
Last Answer : d) Six times
Description : UMTS does not has backward compatibility with ____________ a) GSM b) IS-136 c) IS-95 d) GPRS
Last Answer : c) IS-95
Description : Which of the following leads to the 3G evolution of GSM, IS-136 and PDC systems? a) W-CDMA b) GPRS c) EDGE d) HSCSD
Last Answer : a) W-CDMA
Description : What is the term used by ITU for a set of global standards of 3G systems? a) IMT 2000 b) GSM c) CDMA d) EDGE
Last Answer : a) IMT 2000
Description : Group of superframes in GSM is called multiframe. a) True b) False
Description : Which of the following is not a control channel of GSM? a) BCH b) CCCH c) DCCH d) TCH
Last Answer : d) TCH
Description : Which of the following feature makes impossible to eavesdrop on GSM radio transmission? a) SIM b) On the air privacy c) SMS d) Packet switched traffic
Last Answer : b) On the air privacy
Description : Which of the following memory device stores information such as subscriber’s identification number in GSM? a) Register b) Flip flop c) SIM d) SMS
Last Answer : c) SIM
Description : Which of the following does not come under the teleservices of GSM? a) Standard mobile telephony b) Mobile originated traffic c) Base originated traffic d) Packet switched traffic
Last Answer : d) Packet switched traffic
Description : Who sets the standards of GSM? a) ITU b) AT & T c) ETSI d) USDC
Last Answer : c) ETSI
Description : Previously in 1980s, GSM stands for ____________ a) Global system for mobile b) Groupe special mobile c) Global special mobile d) Groupe system mobile
Last Answer : b) Groupe special mobile
Description : Which of the following is the world’s first cellular system to specify digital modulation and network level architecture? a) GSM b) AMPS c) CDMA d) IS-54
Last Answer : a) GSM
Description : In version field of IPv4 header, when machine is using some other version of IPv4 then datagram is __________ a) Discarded b) Accepted c) Interpreted d) Interpreted incorrectly
Last Answer : a) Discarded
Description : An internet is a __________ a) Collection of WANS b) Network of networks c) Collection of LANS d) Collection of identical LANS and WANS
Last Answer : b) Network of networks
Description : In wireless distribution system __________ a) multiple access point are inter-connected with each other b) there is no access point c) only one access point exists d) access points are not required
Last Answer : a) multiple access point are inter-connected with each other
Description : __________ carries digitally encoded user data. a) Traffic channels b) Control channels c) Signalling channels d) Forward channels
Last Answer : a) Traffic channels
Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT
Last Answer : c) Cdma2000 1xEV-DO
Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV
Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV
Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment
Last Answer : a) Clubbing adjacent radio channels
Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT
Last Answer : c) Qualcomm
Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA
Last Answer : d) OFDMA
Description : Cdma2000 works in TDD mode only. a) True b) False
Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times
Last Answer : b) Twice
Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X
Last Answer : d) G3G-MC-CDMA-1X
Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne
Last Answer : c) Cdma2000 1xRTT
Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False
Last Answer : a) True
Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B
Last Answer : b) GPRS
Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories
Last Answer : b) Qualcomm
Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing
Last Answer : d) Limited Internet Browsing
Description : IS-136 uses which modulation technique? a) π/4 DQPSK b) BPSK c) GMSK d) AFSK
Last Answer : a) π/4 DQPSK
Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK
Last Answer : b) BPSK
Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five
Last Answer : b) Sixty four
Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen
Last Answer : c) Three
Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B
Last Answer : a) CdmaOne
Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE
Last Answer : a) IS-95
Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only
Last Answer : b) TDMA/FDD and CDMA/FDD
Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error
Last Answer : b) Quantization error
Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude
Last Answer : b) Amplitude
Description : Quantization noise can be reduced by ________ the number of levels. a) Decreasing b) Increasing c) Doubling d) Squaring
Last Answer : b) Increasing