Description : Which of the following channel is used by base station to provide forward link communication to mobile? a) RACH b) AGCH c) DCCH d) PCH
Last Answer : b) AGCH
Description : Which of the following channel provides paging signals from base station to all mobiles in the cell? a) RACH b) AGCH c) DCCH d) PCH
Last Answer : d) PCH
Description : Which of the following channel does not come under CCCH? a) PCH b) RACH c) DCCH d) AGCH
Last Answer : c) DCCH
Description : hich of the following burst is used to broadcast the frequency and time synchronization control messages? a) FCCH and SCH b) TCH and DCCH c) RACH and TCH d) FCCH and DCCH
Last Answer : a) FCCH and SCH
Description : Which of the following is the forward control channel that is used to broadcast information? a) BCCH b) CCCH c) DCCH d) TCH
Last Answer : a) BCCH
Description : Which of the following is not a control channel of GSM? a) BCH b) CCCH c) DCCH d) TCH
Last Answer : d) TCH
Description : Bluetooth standard is named after ___________ a) King Ronaldo Bluetooth b) Pope Vincent Bluetooth c) King Herald Bluetooth d) Pope Francis Bluetooth
Last Answer : c) King Herald Bluetooth
Description : PSTN is ___________ and wireless networks are ________ a) Highly dynamic, virtually static b) Static, virtually static c) Highly dynamic, virtually dynamic d) Virtually static, highly dynamic
Last Answer : d) Virtually static, highly dynamic
Description : Communication protocol, CAI stands for ___________ a) Common air interchange b) Control air interchange c) Common air interface d) Control air interchange
Last Answer : a) Common air interchange
Description : ___________ manages the switching function in GSM. a) BSS b) NSS c) OSS d) MSC
Last Answer : c) OSS
Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen
Last Answer : c) Three
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : Mostly ________ is used in wireless LAN. a) time division multiplexing b) orthogonal frequency division multiplexing c) space division multiplexing d) channel division multiplexing
Last Answer : b) orthogonal frequency division multiplexing
Description : What is the raw channel bit error rate of Bluetooth? a) 10-3 b) 10-10 c) 103 d) 10-1
Last Answer : a) 10-3
Description : What is the channel symbol rate in Bluetooth for each user? a) 270.833 Kbps b) 1 Gbps c) 100 Mbps d) 1 Mbps
Last Answer : d) 1 Mbps
Description : Wireless networks are extremely hostile and random nature of radio channel. a) True b) False
Last Answer : a) True
Description : Which of the following does not come under subsystem of GSM architecture? a) BSS b) NSS c) OSS d) Channel
Last Answer : d) Channel
Description : Which is a link layer protocol? a) ARP b) TCP c) UDP d) HTTP
Last Answer : b) TCP
Description : Network layer at source is responsible for creating a packet from data coming from another ________ a) Station b) Link c) Node d) Protocol
Last Answer : d) Protocol
Description : Checksum is used in Internet by several protocols although not at the _________ a) Session layer b) Transport layer c) Network layer d) Data link layer
Last Answer : d) Data link layer
Description : HIPER-LAN stands for ____________ a) High Precision Radio Local Area Network b) High Performance Radio Local Area Network c) High Precision Radio Land Area Network d) Huge Performance Radio Link Access Node
Last Answer : b) High Performance Radio Local Area Network
Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT
Last Answer : c) Cdma2000 1xEV-DO
Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV
Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV
Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment
Last Answer : a) Clubbing adjacent radio channels
Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT
Last Answer : c) Qualcomm
Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA
Last Answer : d) OFDMA
Description : Cdma2000 works in TDD mode only. a) True b) False
Last Answer : b) False
Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times
Last Answer : b) Twice
Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X
Last Answer : d) G3G-MC-CDMA-1X
Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne
Last Answer : c) Cdma2000 1xRTT
Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False
Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B
Last Answer : b) GPRS
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS
Last Answer : c) PDC
Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories
Last Answer : b) Qualcomm
Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile
Last Answer : c) Group Special Mobile
Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing
Last Answer : d) Limited Internet Browsing
Description : IS-136 uses which modulation technique? a) π/4 DQPSK b) BPSK c) GMSK d) AFSK
Last Answer : a) π/4 DQPSK
Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK
Last Answer : b) BPSK
Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK
Last Answer : a) GMSK
Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five
Last Answer : b) Sixty four
Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B
Last Answer : a) CdmaOne
Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE
Last Answer : a) IS-95
Description : Which one is not a TDMA standard of second generation networks? a) GSM b) IS-136 c) AMPS d) PDC
Last Answer : c) AMPS
Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only
Last Answer : b) TDMA/FDD and CDMA/FDD
Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error
Last Answer : b) Quantization error
Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude
Last Answer : b) Amplitude
Description : Quantization noise can be reduced by ________ the number of levels. a) Decreasing b) Increasing c) Doubling d) Squaring
Last Answer : b) Increasing
Description : The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2
Last Answer : a) l=log(to the base 2)L
Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization
Last Answer : b) PCM signal