Description : Which of the following WLAN standard has been named Wi-Fi? a) IEEE 802.6 b) IEEE 802.15.4 c) DSSS IEEE 802.11b d) IEEE 802.11g
Last Answer : c) DSSS IEEE 802.11b
Description : What is the access point (AP) in a wireless LAN? a) device that allows wireless devices to connect to a wired network b) wireless devices itself c) both device that allows wireless devices to connect to a wired network and wireless devices itself d) all the nodes in the network
Last Answer : a) device that allows wireless devices to connect to a wired network
Description : What is Wired Equivalent Privacy (WEP)? a) security algorithm for ethernet b) security algorithm for wireless networks c) security algorithm for usb communication d) security algorithm for emails
Last Answer : b) security algorithm for wireless networks
Description : Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks
Last Answer : a) collision detection
Description : PCS/PCN provides only wired communication. a) True b) False
Last Answer : b) False
Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only
Last Answer : b) TDMA/FDD and CDMA/FDD
Description : UMTS use which multiple access technique? a) CDMA b) TDMA c) FDMA d) SDMA
Last Answer : a) CDMA
Description : Which of the following is not a characteristic of 3G network? a) Communication over VoIP b) Unparalleled network capacity c) Multi-megabit Internet access d) LTE based network
Last Answer : d) LTE based network
Description : In wireless network an extended service set is a set of ________ a) connected basic service sets b) all stations c) all access points d) connected access points
Last Answer : a) connected basic service sets
Description : In wireless distribution system __________ a) multiple access point are inter-connected with each other b) there is no access point c) only one access point exists d) access points are not required
Last Answer : a) multiple access point are inter-connected with each other
Description : In wireless ad-hoc network _________ a) access point is not required b) access point is must c) nodes are not required d) all nodes are access points
Last Answer : a) access point is not required
Description : HIPER-LAN stands for ____________ a) High Precision Radio Local Area Network b) High Performance Radio Local Area Network c) High Precision Radio Land Area Network d) Huge Performance Radio Link Access Node
Last Answer : b) High Performance Radio Local Area Network
Description : Which of the following specifies a set of media access control (MAC) and physical layer specifications for implementing WLANs? a) IEEE 802.16 b) IEEE 802.3 c) IEEE 802.11 d) IEEE 802.15
Last Answer : c) IEEE 802.11
Description : What is the full form of WLAN? a) Wide Local Area Network b) Wireless Local Area Network c) Wireless Land Access Network d) Wireless Local Area Node
Last Answer : b) Wireless Local Area Network
Description : In public switched telephone network, LATA stands for ______ a) Local access and transport area b) Land area and transport area c) Local access and telephone access d) Local area and telephone access
Last Answer : a) Local access and transport area
Description : Transmission protocol, PRMA stands for _________ a) Pocket reservation multiple access b) Packet register multiple access c) Pocket register multiple access d) Packet reservation multiple access
Last Answer : d) Packet reservation multiple access
Description : is 80211e wireless lan card used to access WI FI hot spots for internet?
Last Answer : Yes. 802.11e is for Wi Fi.
Description : Is there a way to get wireless internet access in places where there's no cell reception or wi-fi hotspots?
Last Answer : Yes, to get wireless internet access in a place with no cell reception or wi-fi hotspots one would have to attach a wireless router to their existing internet access. This can be done with DSL, Cable, or Fiber Optic internet access.
Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT
Last Answer : c) Cdma2000 1xEV-DO
Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV
Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV
Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment
Last Answer : a) Clubbing adjacent radio channels
Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT
Last Answer : c) Qualcomm
Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA
Last Answer : d) OFDMA
Description : Cdma2000 works in TDD mode only. a) True b) False
Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times
Last Answer : b) Twice
Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X
Last Answer : d) G3G-MC-CDMA-1X
Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne
Last Answer : c) Cdma2000 1xRTT
Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False
Last Answer : a) True
Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B
Last Answer : b) GPRS
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS
Last Answer : c) PDC
Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories
Last Answer : b) Qualcomm
Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile
Last Answer : c) Group Special Mobile
Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing
Last Answer : d) Limited Internet Browsing
Description : IS-136 uses which modulation technique? a) π/4 DQPSK b) BPSK c) GMSK d) AFSK
Last Answer : a) π/4 DQPSK
Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK
Last Answer : b) BPSK
Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK
Last Answer : a) GMSK
Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five
Last Answer : b) Sixty four
Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen
Last Answer : c) Three
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B
Last Answer : a) CdmaOne
Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE
Last Answer : a) IS-95
Description : Which one is not a TDMA standard of second generation networks? a) GSM b) IS-136 c) AMPS d) PDC
Last Answer : c) AMPS
Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error
Last Answer : b) Quantization error
Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude
Last Answer : b) Amplitude
Description : Quantization noise can be reduced by ________ the number of levels. a) Decreasing b) Increasing c) Doubling d) Squaring
Last Answer : b) Increasing
Description : The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2
Last Answer : a) l=log(to the base 2)L
Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization
Last Answer : b) PCM signal
Description : Which protocol is commonly used to retrieve email from a mail server? a) FTP b) IMAP c) HTML d) TELNET
Last Answer : b) IMAP
Description : Which is a link layer protocol? a) ARP b) TCP c) UDP d) HTTP
Last Answer : b) TCP