Description : In 3G network, W-CDMA is also known as UMTS. The minimum spectrum allocation required for W-CDMA is .......... (1) 2 MHz (2) 20 KHz (3) 5 KHz (4) 5 MHz
Last Answer : Answer: 4
Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz
Last Answer : b) 200 KHz
Description : What is the name of 300 MHz of unlicensed spectrum allocated by FCC in ISM band? a) UNII b) Unlicensed PCS c) Millimetre wave d) Bluetooth
Last Answer : a) UNII
Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve
Last Answer : a) Eight
Description : How much increase in spectral efficiency is provided by W-CDMA in comparison to GSM? a) Two times b) Three times c) No increase d) Six times
Last Answer : d) Six times
Description : W-CDMA requires a complete change of RF equipment at each base station. a) True b) False
Last Answer : a) True
Description : How much packet data rate per user is supported by W-CDMA if the user is stationary? a) 2.048 Kbps b) 100 Mbps c) 2.048 Mbps d) 1 Gbps
Last Answer : c) 2.048 Mbps
Description : W-CDMA works in FDD mode only. a) True b) False
Last Answer : b) False
Description : What is the chip rate of W-CDMA? a) 1.2288 Mcps b) 3.84 Mcps c) 270.833 Ksps d) 100 Mcps
Last Answer : b) 3.84 Mcps
Description : UMTS is also known as _____________ a) IS-95 b) GPRS c) CdmaOne d) W-CDMA
Last Answer : d) W-CDMA
Description : What is 3GPP2? a) Project based on W-CDMA b) Project based on cdma2000 c) Project based on 2G standards d) Project based on 2.5G standards
Last Answer : b) Project based on cdma2000
Description : hat is 3GPP? a) Project based on W-CDMA b) Project based on cdma2000 c) Project based on 2G standards d) Project based on 2.5G standards
Last Answer : a) Project based on W-CDMA
Description : Which of the following leads to the 3G evolution of GSM, IS-136 and PDC systems? a) W-CDMA b) GPRS c) EDGE d) HSCSD
Last Answer : a) W-CDMA
Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five
Last Answer : b) Sixty four
Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times
Last Answer : b) Twice
Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X
Last Answer : d) G3G-MC-CDMA-1X
Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne
Last Answer : c) Cdma2000 1xRTT
Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False
Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories
Last Answer : b) Qualcomm
Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B
Last Answer : a) CdmaOne
Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE
Last Answer : a) IS-95
Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only
Last Answer : b) TDMA/FDD and CDMA/FDD
Description : UMTS use which multiple access technique? a) CDMA b) TDMA c) FDMA d) SDMA
Last Answer : a) CDMA
Description : Which of the following leads to evolution of 3G networks in CDMA systems? a) IS-95 b) IS-95B c) CdmaOne d) Cdma2000
Last Answer : d) Cdma2000
Description : What is the term used by ITU for a set of global standards of 3G systems? a) IMT 2000 b) GSM c) CDMA d) EDGE
Last Answer : a) IMT 2000
Description : LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD
Last Answer : b) CSMA/CA
Description : Which of the following is the world’s first cellular system to specify digital modulation and network level architecture? a) GSM b) AMPS c) CDMA d) IS-54
Last Answer : a) GSM
Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen
Last Answer : c) Three
Description : What is the spectrum of stereophonic FM signal? A. 19 to 38 kHz B. 30 to 53 kHz C. 59.5 to 74.5 kHz D. 88 to 108 MHz
Last Answer : B. 30 to 53 kHz
Description : How many voice signals (4 kHz max.) would fit into a 5 MHz spectrum? A. 1250 B. 500 C. 1000 D. 1500
Last Answer : A. 1250
Description : The extremely high frequency (EHF) band is in the radio spectrum range of _______. A. 30 to 300 kHz B. 30 to 300 GHz C. 3 to 30 MHz D. 3 to 30 GHz
Last Answer : B. 30 to 300 GHz
Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment
Last Answer : a) Clubbing adjacent radio channels
Description : Which of the following spread spectrum techniques were used in the original IEEE 802.11 standard? a) FHSS and DSSS b) THSS and FHSS c) THSS and DSSS d) Hybrid technique
Last Answer : a) FHSS and DSSS
Description : WLANs use high power levels and generally require a license for spectrum use. a) True b) False
Description : Industrial noise frequency is between _____. A. 0 to 10 KHz B. 160 MHz to 200 MHz C. 15 to 160 MHz D. 200 to 3000 MHz
Last Answer : C. 15 to 160 MHz
Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz
Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz
Description : Industrial noise frequency is between _________. A. 200 to 3000 Mhz B. 15 to 160 Mhz C. 0 to 10 Khz D. 20 Ghz
Last Answer : B. 15 to 160 Mhz
Description : What is the data rate of HomeRF 2.0? a) 10 Mbps b) 54 Mbps c) 200 Mbps d) 1 Mbps
Last Answer : a) 10 Mbps
Description : Assuming a UHF frequency range of 405.0125 MHz to 405.0875 MHz at 25 kHz channeling plan, how many channels can you produce? A. 2.5 ch. B. 2 ch. C. 4 ch. D. 3 ch.
Last Answer : D. 3 ch.
Description : How wide is the spectrum bandwidth of a single GSM carrier? A. 100 kHz B. 200 kHz C. 50 kHz D. 16 kHz
Last Answer : B. 200 kHz
Description : Assume a frequency range of 405.0125 MHz to 405.0875 MHz and 25 kHz channeling plan, determine the center frequency of the second channel from the lower limit. A. 405.030 MHz B. 405.025 MHz C. 405.050 MHz D. 405.075 MHz
Last Answer : C. 405.050 MHz
Description : Assume a frequency range of 401.000 MHz to 401.050 MHz, if you apply 25 kHz channeling plan, determine the center frequency of the first channel from the lower limit. A. 401.010 MHz B. 401.0125 MHz C. 401.025 MHz D. 401.00625 MHz
Last Answer : B. 401.0125 MHz
Description : In wireless distribution system __________ a) multiple access point are inter-connected with each other b) there is no access point c) only one access point exists d) access points are not required
Last Answer : a) multiple access point are inter-connected with each other
Description : In wireless ad-hoc network _________ a) access point is not required b) access point is must c) nodes are not required d) all nodes are access points
Last Answer : a) access point is not required
Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000
Last Answer : C. 125,000
Description : How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz
Last Answer : B. 1.25 MHz
Description : Atmospheric noise becomes less severe at frequencies A. above 30 MHz B. below 30 MHz C. above 3000 kHz D. below 3000kHz
Last Answer : A. above 30 MHz
Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz
Last Answer : D. 300 MHz to 3 GHz
Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz
Last Answer : B. 3 MHz to 30 MHz
Description : Which of the following frequency bands is best suited for ground wave propagation? A. 30 to 300 kHz B. 300 kHz to 3 MHz C. 3 MHz to 30 MHz D. 30 MHz to 300 MHz
Last Answer : A. 30 to 300 kHz