WLANs use high power levels and generally require a license for spectrum use. a) True
b) False

1 Answer

Answer :

b) False

Related questions

Description : Which of the following specifies a set of media access control (MAC) and physical layer specifications for implementing WLANs? a) IEEE 802.16 b) IEEE 802.3 c) IEEE 802.11 d) IEEE 802.15

Last Answer : c) IEEE 802.11

Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment

Last Answer : a) Clubbing adjacent radio channels

Description : What is the minimum spectrum allocation required by W-CDMA? a) 5 MHz b) 20MHz c) 1.25 MHz d) 200 KHz

Last Answer : a) 5 MHz

Description : Which of the following spread spectrum techniques were used in the original IEEE 802.11 standard? a) FHSS and DSSS b) THSS and FHSS c) THSS and DSSS d) Hybrid technique

Last Answer : a) FHSS and DSSS

Description : What is the name of 300 MHz of unlicensed spectrum allocated by FCC in ISM band? a) UNII b) Unlicensed PCS c) Millimetre wave d) Bluetooth

Last Answer : a) UNII

Description : Cdma2000 works in TDD mode only. a) True b) False

Last Answer : b) False

Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False

Last Answer : a) True

Description : W-CDMA requires a complete change of RF equipment at each base station. a) True b) False

Last Answer : a) True

Description : W-CDMA works in FDD mode only. a) True b) False

Last Answer : b) False

Description : The price of WLAN hardware is more than 3G telephones and fixed wireless equipment. a) True b) False

Last Answer : b) False

Description : Wireless networks are extremely hostile and random nature of radio channel. a) True b) False

Last Answer : a) True

Description : At the base station, the air interface portion of mobile transmission is passed to MSC. a) True b) False

Last Answer : b) False

Description : MSCs provide connectivity between PSTN and the base stations. a) True b) False

Last Answer : a) True

Description : Circuit switching has more advantage than packet switching for PCS. a) True b) False

Last Answer : b) False

Description : AIN has different telephone numbers for both wireline and wireless services. a) True b) False

Last Answer : b) False

Description : PCS/PCN provides only wired communication. a) True b) False

Last Answer : b) False

Description : Group of superframes in GSM is called multiframe. a) True b) False

Last Answer : b) False

Description : Quantization noise can be reduced by ________ the number of levels. a) Decreasing b) Increasing c) Doubling d) Squaring

Last Answer : b) Increasing

Description : HIPER-LAN stands for ____________ a) High Precision Radio Local Area Network b) High Performance Radio Local Area Network c) High Precision Radio Land Area Network d) Huge Performance Radio Link Access Node

Last Answer : b) High Performance Radio Local Area Network

Description : Which of the following is the 802.11 High Rate Standard? a) IEEE 802.15 b) IEEE 802.15.4 c) IEEE 802.11g d) IEEE 802.11b

Last Answer : d) IEEE 802.11b

Description : Several protocols for upper layers in bluetooth use _________ a) UDP b) HSP c) ITC d) L2CAP

Last Answer : d) L2CAP

Description : UMTS use which multiple access technique? a) CDMA b) TDMA c) FDMA d) SDMA

Last Answer : a) CDMA

Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT

Last Answer : c) Cdma2000 1xEV-DO

Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV

Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV

Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT

Last Answer : c) Qualcomm

Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA

Last Answer : d) OFDMA

Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times

Last Answer : b) Twice

Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X

Last Answer : d) G3G-MC-CDMA-1X

Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne

Last Answer : c) Cdma2000 1xRTT

Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B

Last Answer : b) GPRS

Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz

Last Answer : b) 200 KHz

Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS

Last Answer : c) PDC

Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories

Last Answer : b) Qualcomm

Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile

Last Answer : c) Group Special Mobile

Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing

Last Answer : d) Limited Internet Browsing

Description : IS-136 uses which modulation technique? a) π/4 DQPSK b) BPSK c) GMSK d) AFSK

Last Answer : a) π/4 DQPSK

Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK

Last Answer : b) BPSK

Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK

Last Answer : a) GMSK

Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five

Last Answer : b) Sixty four

Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen

Last Answer : c) Three

Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve

Last Answer : a) Eight

Description : Popular 2G CDMA standard IS-95 is also known as ______________ a) CdmaOne b) CdmaTwo c) IS-136 d) IS-95B

Last Answer : a) CdmaOne

Description : Which of the following is a CDMA standard of second generation network? a) IS-95 b) IS-136 c) ETACS d) EDGE

Last Answer : a) IS-95

Description : Which one is not a TDMA standard of second generation networks? a) GSM b) IS-136 c) AMPS d) PDC

Last Answer : c) AMPS

Description : Which of the following multiple access techniques are used by second generation cellular systems? a) FDMA/FDD and TDMA/FDD c c) FDMA/FDD and CDMA/FDD d) FDMA/FDD only

Last Answer : b) TDMA/FDD and CDMA/FDD

Description : Choosing a discrete value that is near but not exactly at the analog signal level leads to a) PCM error b) Quantization error c) PAM error d) Sampling error

Last Answer : b) Quantization error

Description : In PCM encoding, quantization level varies as a function of ________ a) Frequency b) Amplitude c) Square of frequency d) Square of amplitude

Last Answer : b) Amplitude

Description : The length of the code-word obtained by encoding quantized sample is equal to a) l=log(to the base 2)L b) l=log(to the base 10)L c) l=2log(to the base 2)L d) l=log(to the base 2)L/2

Last Answer : a) l=log(to the base 2)L

Description : The signals which are obtained by encoding each quantized signal into a digital word is called as a) PAM signal b) PCM signal c) FM signal d) Sampling and quantization

Last Answer : b) PCM signal

Description : Which protocol is commonly used to retrieve email from a mail server? a) FTP b) IMAP c) HTML d) TELNET

Last Answer : b) IMAP