Description : The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Last Answer : c.B-spline curve
Description : The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Description : The Bezier curve is smoother than the Hermite cubic spline because it has _________ orderderivatives. a.lower b.higher c.lower and higher both d.none of the above
Last Answer : b.higher
Description : The curve that follows a convex hull property is: a.Cubic spline b.B-spline c.Bezier curve d.Both (b) and (c)
Last Answer : b.B-spline
Description : Which of the following is not a synthetic entity? a.Hyperbola b.Bezier curve c.B-spline curve d.Cubic spline curve
Last Answer : a.Hyperbola
Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above
Last Answer : b.Hermite Cubic Spline Curve
Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above
Description : ________curves allow local control of the curve. a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline
Last Answer : d.B-Spline
Description : curves allow local control of the curve a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline
Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4
Last Answer : a.2u3-3u2+2u+4
Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1
Last Answer : a.-5u3+8u2+u+1
Description : The degree of the Bezier curve with n control points is a.n + 1 b.n - 1 c.n d.2n
Last Answer : a.n + 1
Description : The shape of Bezier curve is controlled by a.Control points b.Knots c.End points d.All the above
Last Answer : a.Control points
Description : In the bezier curve, the curve is always________to first and last segments of the polygon a.normal b.parallel c.tangent d.none of the above
Last Answer : c.tangent
Description : In the bezier curve, the curve is always to first and last segments of thepolygon a.normal b.parallel c.tangent d.none of the above
Description : The B-spline curve has a a.first-order continuity b.second-order continuity c.zero-order continuity d.none of the above
Last Answer : b.second-order continuity
Description : The degree of the B-spline with varying knot vectors a.Increases with knot vectors b.Decreases with knot vectors c.Remains constant d.none of the above
Last Answer : a.Increases with knot vectors
Description : Which of the following is not an analytical entity? a.Line b.Circle c.Spline d.Parabola
Last Answer : c.Spline
Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above
Last Answer : b.increase in the number of vertices
Description : In Beizer Curve, the flexibility of the shape would increase with a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above
Description : In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above
Last Answer : b.the shape of the defining polygon
Description : In Beizer Curve, the curve follows a.the control points b.the shape of the defining polygon c.the defining points d.none of the above
Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter
Last Answer : a.the major diameter
Description : Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations
Last Answer : a.polynomial equations
Description : When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve
Last Answer : a.approximation curve
Description : When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve
Last Answer : d.interpolant curve
Description : When a smooth curve is approximated through the data points, then the curve isknown as a.interpolant curve b.approximation curve c.pitch curve d.data curve
Last Answer : b.approximation curve
Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter
Description : Which of the following statement(s) is/are correct with reference to curve generation? I. Hermite curves are generated using the concepts of interpolation. II. Bezier curves are generated using the concepts of approximation. III. The ... (B) II and III only (C) I and II only (D) I, II and III only
Last Answer : (D) I, II and III only
Description : The number of tangents required to describe cubic splines is a.2 b.1 c.3 d.4
Last Answer : b.1
Description : Laminated Object Manufacturing (LOM) is developed by_______ a.Stratasys b.CAM-LEM c.Kira Corporation d.Cubic Technologies
Last Answer : d.Cubic Technologies
Description : QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points
Last Answer : c.Four bounding curves defining surface
Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder
Last Answer : d.perpendicular to the axis of the cylinder
Description : In synthetic curves, first-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above
Last Answer : b.a slope continuous curve
Description : In synthetic curves, zero-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above
Last Answer : a.a position continuous curve
Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above
Last Answer : c.equal to
Description : Which of the following is not a method to describe a curve mathematically? a.Explicit form b.Laplace form c.Implicit form d.Parametric form
Last Answer : b.Laplace form
Description : The curve is defined as the locus of a point moving with _ degree of freedom a.0 b.1 c.2 d.3
Description : In synthetic curves, second-order continuity yields a.a position continuous curve b.a slope continuous curve c.a curvature continuous curve d.none of the above
Last Answer : c.a curvature continuous curve
Description : is an extension of the wireframe model with additional face information added. a.CSG b.B-rep c.Loft d.none of the above
Last Answer : b.B-rep
Description : The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5
Last Answer : b.3
Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above
Last Answer : c.global coordinate system
Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7
Last Answer : c.8,7
Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5
Last Answer : a.9.24,9.24
Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]
Last Answer : c.[3.75 4.75 6.75]
Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k
Last Answer : b.3i-j-5k
Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]
Last Answer : a.[3 5 8]+u[3 -1 -5]
Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)
Last Answer : c.(10, 10)
Description : Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a
Last Answer : d.Only a