Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware
Last Answer : c.Digitizers may be used as interactive input devices
Description : From the following in which FMS layout machine tools are kept along a straight line. a.Loop layout b.In line layout c.Ladder layout d.Open field layout
Last Answer : b.In line layout
Description : The repeatability of NC machine depends on a.control loop errors b.mechanical errors c.electrical errors d.none of the mentioned
Last Answer : b.mechanical errors
Description : In which machine we get feedback? a.Lathe machine b.NC machine c.CNC machine d.Milling machine
Last Answer : c.CNC machine
Description : From the following in which FMS layout robots are used as material handling system a.Ladder layout b.Open field layout c.Loop layout d.Robot centered layout
Last Answer : d.Robot centered layout
Description : From the following which FMS layout is combination of many loop and ladder layout a.Ladder layout b.Open field layout c.Loop layout d.None of the above
Last Answer : b.Open field layout
Description : From the following in which FMS layout workstations are arranged in a loop with rungs a.Ladder layout b.Open field layout c.Loop layout d.None of the above
Last Answer : a.Ladder layout
Description : Control loop unit of M.C.U is always a.a hardware unit b.a software unit c.a control unit d.none of the mentioned
Last Answer : a.a hardware unit
Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System
Last Answer : d.Adaptive Control System
Description : From the following in which FMS layout workstations are arranged in a loop a.Ladder layout b.In line layout c.Loop layout d.None of the above
Last Answer : c.Loop layout
Description : An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop gain is (a) 1 (b) 1,00,000 (c) 50 (d) 0.02
Last Answer : The closed loop gain Ag = G/(1+G*f) Where G is the open loop gain and f is the feedback fraction So Ag = 49.975
Description : Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above
Last Answer : c.Machine control unit
Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation
Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth
Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will
Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.
Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution
Last Answer : c.coons patch
Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution
Description : ____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above
Last Answer : a.Flexible manufacturing system
Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine
Last Answer : c.RP machine
Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point
Last Answer : b.machine Zero Point
Description : QFor generating Coons patch we require a.A set of grid points on surface b.A set of control points c.Four bounding curves defining surface d.Two bounding curves and a set of grid control points
Last Answer : c.Four bounding curves defining surface
Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling
Last Answer : b.Fixed point
Description : The technology is defined as the sophistication of a plant ,any equipment or any machine etc a.TRUE b.FALSE c.D d.
Last Answer : b.FALSE
Description : ____ is a general purpose, programmable machine possessing certain human like characteristics a.Robot b.Manipulator c.Gripper d.None of the above
Last Answer : a.Robot
Description : From the following which is the step of machine cell design? a.Divide parts into part families b.Select type of machine cell c.Prepare a composite part d.All of the above
Last Answer : d.All of the above
Description : In which layout manufacturing is done according to machine arrangement a.GT layout b.Product layout c.Process layout d.Hybrid layout
Last Answer : c.Process layout
Description : Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator
Last Answer : d.Adobe Illustrator
Description : What is the format for the prototyping machine file? a..prt b..slt c..stl d..iges
Last Answer : c..stl
Description : Which of the following is one of the design process steps? a.Build b.Concept c.Pre-processing d.Transfer to machine
Last Answer : b.Concept
Description : Which of the following is the process in the RP cycle? a.Post-processing b.Transfer to machine c.Pre-processing d.All of the above
Description : Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software
Last Answer : b.Tolerance
Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above
Last Answer : a.Backlash in gearing
Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above
Last Answer : c.A & B both
Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09
Last Answer : b.M06
Description : Maximum spindle speed limitation code in CNC Machine a.G90 b.G91 c.G92 d.G93
Last Answer : c.G92
Description : To indicate the position of the workpiece ly & easily machine zero pint should be displacedto another point on the workpiece called… a.Workpiece zero Point b.machine Zero Point c.Start Point d.Program Zero point
Last Answer : a.Workpiece zero Point
Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above
Last Answer : c.Canned Cycle
Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre
Last Answer : d.Line Joining Chuck centre & tail stock centre
Description : In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5
Last Answer : b.3
Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5
Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5
Description : From the following which is not the type of protocol used in CIM? a.Open standard interconnection - OSI b.Manufacturing Automation Protocol - MAP c.Technical and Industrial Protocol - TIP d.None of the above
Last Answer : c.Technical and Industrial Protocol - TIP
Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).
Last Answer : Both the input signal and the feedback signal.
Description : For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to
Last Answer : For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to inverse of feedback factor
Description : Numerical control a.applies only to milling machines b.is a method for producing exact number of parts per hour c.is a method for controlling by means of set of instructions d.None of the mentioned
Last Answer : c.is a method for controlling by means of set of instructions
Description : The software that is used to control the computer’s work flow, organize its data andperform housekeeping functions is known as a.operating software b.graphics software c.application software d.programming software
Last Answer : a.operating software
Description : The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola
Last Answer : c.B-spline curve
Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above
Last Answer : b.increase in the number of vertices
Description : In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above
Last Answer : b.the shape of the defining polygon
Description : ________curves allow local control of the curve. a.Analytical b.Hermite cubic spline c.Beizer d.B-Spline
Last Answer : d.B-Spline
Description : The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola