The numerical difference between the liquid limit and plastic limit of a soil is known as a) Liquidity index b) Plasticity index * c) Shrinkage index d) Consistency index

The numerical difference between the liquid limit and plastic limit of a soil is known as a) Liquidity index  
b) Plasticity index *
c) Shrinkage index
d) Consistency index
by

1 Answer

Answer :

b) Plasticity index *
by

Related questions

The consistency index of soil is a) (Natural water content - liquid limit) / plasticity index b) (Natural water content - liquid limit )/ liquidity index c) (Liquid limit - natural water content)/ consistency index d) (Liquid limit - natural water content)/plasticity index*

Description : The consistency index of soil is a) (Natural water content - liquid limit) / plasticity index b) (Natural water content - liquid limit )/ liquidity index c) (Liquid limit - natural water content)/ consistency index d) (Liquid limit - natural water content)/plasticity index*

Last Answer : d) (Liquid limit - natural water content)/plasticity index*

The plasticity index is the numerical difference between (A) Liquid limit and plastic limit (B) Plastic limit and shrinkage limit (C) Liquid limit and shrinkage limit (D) None of these

Description : The plasticity index is the numerical difference between (A) Liquid limit and plastic limit (B) Plastic limit and shrinkage limit (C) Liquid limit and shrinkage limit (D) None of these

Last Answer : (A) Liquid limit and plastic limit

The minimum water content at which a reduction in water content will not cause a decrease in the volume of a soil mass is known as a) Plastic limit b) Shrinkage limit* c) Liquid limit d) Consistency limit

Description : The minimum water content at which a reduction in water content will not cause a decrease in the volume of a soil mass is known as a) Plastic limit b) Shrinkage limit* c) Liquid limit d) Consistency limit

Last Answer : b) Shrinkage limit*

Pick up the correct statement from the following: (A) The range of water content between the liquid limit and plastic limit is called plasticity index (B) The ratio of the liquid limit minus the natural water content to the plasticity index of soils, is called consistency index (C) The ratio of natural water content minus its plastic limit to its plasticity index is called liquidity index (D) All the above

Description : Pick up the correct statement from the following: (A) The range of water content between the liquid limit and plastic limit is called plasticity index (B) The ratio of the liquid limit minus ... content minus its plastic limit to its plasticity index is called liquidity index (D) All the above

Last Answer : Answer: Option D

The water content of soil, which represents the boundary between plastic state and liquid state, is known as (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Plasticity index

Description : The water content of soil, which represents the boundary between plastic state and liquid state, is known as (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Plasticity index

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity index of the soil (C) Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Last Answer : Answer: Option D

The consistency index of a soil is defined as the ratio of (A) Liquid limit plus the natural water content to the plasticity index of the soil (B) Liquid limit minus the natural water content to the plasticity index of the soil (C) Natural water content of a soil minus plastic limit to the plasticity index of the soil (D) Natural water content of a soil plus its plastic limit to the plasticity index of the soil

Description : The consistency index of a soil is defined as the ratio of (A) Liquid limit plus the natural water content to the plasticity index of the soil (B) Liquid limit minus the natural water content to ... (D) Natural water content of a soil plus its plastic limit to the plasticity index of the soil

Last Answer : Answer: Option B

Plasticity index represents the range of water content between a) Liquid and plastic limit * b) Plastic limit and semi solid limit c) Semisolid Limit and liquid limit d) Liquid limit and solid limit.

Description : Plasticity index represents the range of water content between a) Liquid and plastic limit * b) Plastic limit and semi solid limit c) Semisolid Limit and liquid limit d) Liquid limit and solid limit.

Last Answer : a) Liquid and plastic limit *

The liquidity index is defined as a ratio expressed as percentage of (A) Plastic limit minus the natural water content, to its plasticity index (B) Natural water content minus its plastic limit to its plasticity index (C) Natural water content plus its plastic limit to its plasticity index (D) Liquid limit minus the natural water content to the plasticity index

Description : The liquidity index is defined as a ratio expressed as percentage of (A) Plastic limit minus the natural water content, to its plasticity index (B) Natural water content minus its plastic limit ... to its plasticity index (D) Liquid limit minus the natural water content to the plasticity index

Last Answer : (B) Natural water content minus its plastic limit to its plasticity index

Define Liquid limit, Plastic Limit, Shrinkage limit and Plasticity index.

Description : Define Liquid limit, Plastic Limit, Shrinkage limit and Plasticity index.

Last Answer : Liquid limit (WL) - It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of casagrande's liquid limit apparatus; is called as liquid limit. Plastic limit (Wp ... difference between the liquid limit (WL) and plastic limit (Wp). IP = WL - Wp

The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit

Description : The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit

Last Answer : b) Plasticity*

Toughness index is defined as the ratio of (A) Plasticity index to consistency index (B) Plasticity index to flow index (C) Liquidity index to flow index (D) Consistency index to liquidity index

Description : Toughness index is defined as the ratio of (A) Plasticity index to consistency index (B) Plasticity index to flow index (C) Liquidity index to flow index (D) Consistency index to liquidity index

Last Answer : (B) Plasticity index to flow index

Define: (i) Consistency limit (ii) Liquid limit (iii) Plastic limit (iv) Shrinkage limit

Description : Define: (i) Consistency limit (ii) Liquid limit (iii) Plastic limit (iv) Shrinkage limit

Last Answer : 1. Consistency Limit: The water content at which the soil passes from one state to the another state is called as consistency limit.  2. Liquid Limit: It is defined as the maximum water ... water content at which further reduction in water content will not cause decrease in volume of soil mass. 

When the plastic limit of a soil is greater than the liquid limit, then the plasticity index is reported as (A) Negative (B) Zero (C) Non-plastic (NP) (D) 1

Description : When the plastic limit of a soil is greater than the liquid limit, then the plasticity index is reported as (A) Negative (B) Zero (C) Non-plastic (NP) (D) 1

Last Answer : (B) Zero

If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½

Description : If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½

Last Answer : Answer: Option C

Plasticity index is defined as the range of water content between (A) Liquid and plastic limit (B) Plastic limit and semi solid limit (C) Semi-solid limit and liquid limit (D) Liquid limit and solid limit

Description : Plasticity index is defined as the range of water content between (A) Liquid and plastic limit (B) Plastic limit and semi solid limit (C) Semi-solid limit and liquid limit (D) Liquid limit and solid limit

Last Answer : Answer: Option A

To provide inverted filter to improve the hearing capacity of soil the plasticity index of blanketing material should not be greater than a) 15* b) 20 c) 27 d) 35

Description : To provide inverted filter to improve the hearing capacity of soil the plasticity index of blanketing material should not be greater than a) 15* b) 20 c) 27 d) 35

Last Answer : a) 15*

The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (C) Shrinkage limit

The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (A) Liquid limit

The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (B) Plastic limit

The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve (A) 0 (B) 3 (C) 5 (D) 7

Description : The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve (A) 0 (B) 3 (C) 5 (D) 7

Last Answer : Answer: Option A

The water content in a soil sample when it continues to loose weight without loosing the volume, is called (A) Shrinkage limit (B) Plastic limit (C) Liquid limit (D) Semi-solid limit

Description : The water content in a soil sample when it continues to loose weight without loosing the volume, is called (A) Shrinkage limit (B) Plastic limit (C) Liquid limit (D) Semi-solid limit

Last Answer : Answer: Option A

The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index (C) Decrease in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Description : The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index ... in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Last Answer : Answer: Option C

In soils having same values of plasticity index, if liquid limit is increased, then(A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, permeability and dry strength decrease (C) Compressibility, permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Description : In soils having same values of plasticity index, if liquid limit is increased, then (A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, ... permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Last Answer : Answer: Option D

At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Description : At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Last Answer : c) The shearing strength against flowing is a small but definite

To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Description : To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Last Answer : d) 35

A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40(D) None of these

Description : A soil sample has passing 0.075 mm sieve = 60% liquid limit = 65% and plastic limit = 40%. The group index of the soil, is (A) 5 (B) 20 (C) 40 (D) None of these

Last Answer : (D) None of these

The compression index of a soil (A) Decreases with an increase in the liquid limit (B) Increases with an increase in the liquid limit (C) Decreases with an increase in the plastic limit (D) Is not related with plastic limit

Description : The compression index of a soil (A) Decreases with an increase in the liquid limit (B) Increases with an increase in the liquid limit (C) Decreases with an increase in the plastic limit (D) Is not related with plastic limit

Last Answer : Answer: Option B

Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Last Answer : a) Alumina*

Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Description : Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Last Answer : c) Prevent shrinkage and cracking

The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable

Description : The main function of alumina in brick earth is (A) To impart plasticity (B) To make the brick durable (C) To prevent shrinkage (D) To make the brick impermeable

Last Answer : Answer: Option A

Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) Due to continuous passage of water through a series of well connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Description : Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) ... connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Last Answer : a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit*

According to Atterberg, the soil is said to be of medium plasticity if the plasticity index PI is (A) 0 < PI < 7 (B) 7< PI < 17 (C) 17 < PI <27 (D) PI > 27

Description : According to Atterberg, the soil is said to be of medium plasticity if the plasticity index PI is (A) 0 < PI < 7 (B) 7< PI < 17 (C) 17 < PI 27

Last Answer : (B) 7< PI < 17

the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Description : the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Last Answer : (A) Sand

Define plasticity index and classify soil on its basis.

Description : Define plasticity index and classify soil on its basis.

Last Answer : a) Plasticity index (Ip) It is give measure of degree of plasticity of soil. It is difference be liquid limit and plastic limit Ip = WL - Wp Greater plasticity index, the greater is degree of plasticity of the soil. ... based on Ip i) Non plastic soil  If wp = o        Ip = wL ii) Plastic soil

Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no plasticity (C) The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in (A) Liquid state (B) Plastic state (C) Semisolid state (D) Solid state

Description : If the natural water content of soil mass lies between its liquid limit and plastic limit, the soil mass is said to be in (A) Liquid state (B) Plastic state (C) Semisolid state (D) Solid state

Last Answer : Answer: Option B

With regard to standard of quality of drinking water as laid down by Indian Railway , the requirement (desirable) limit of total dissolved solids should not be more than---------- mg/l a)200 b) 300 c) 400 d) 500*

Description : With regard to standard of quality of drinking water as laid down by Indian Railway , the requirement (desirable) limit of total dissolved solids should not be more than---------- mg/l a)200 b) 300 c) 400

Last Answer : d) 500*

What is the limit of Unevenness of A category of track a. 0 to 10 mm b. 0 to 5 mm c. 0 to 6 mm* d. 0 to 8 mm

Description : What is the limit of Unevenness of A category of track a. 0 to 10 mm b. 0 to 5 mm c. 0 to 6 mm* d. 0 to 8 mm

Last Answer : c. 0 to 6 mm

The index map of preliminary report should be to a scale of (a) 1 cm to 0.5 km (b) 1 cm to 1.0 km (c) 1 cm to 2.5 km* (d) 1 cm to 10.0 km

Description : The index map of preliminary report should be to a scale of (a) 1 cm to 0.5 km (b) 1 cm to 1.0 km (c) 1 cm to 2.5 km* (d) 1 cm to 10.0 km

Last Answer : (c) 1 cm to 2.5 km*

The project report of the reconnaissance survey should be accompanied by Index map area at a scale of 1 cm = ---- km. (a) 2.5 km* (b) 5.0 km (c) 10.0 km (d) 15.0 km (e) 20.0 km

Description : The project report of the reconnaissance survey should be accompanied by Index map area at a scale of 1 cm = ---- km. (a) 2.5 km* (b) 5.0 km (c) 10.0 km (d) 15.0 km (e) 20.0 km

Last Answer : (a) 2.5 km*

What is the full form of TGI a. Track Geometry Index* b. Track general Index c. Track gravity Index d. None of above

Description : What is the full form of TGI a. Track Geometry Index* b. Track general Index c. Track gravity Index d. None of above

Last Answer : a. Track Geometry Index*

“Composite sleeper index” is employed to determine a) sleeper density requirement b) number of fixtures required for a particular type of sleeper c) durability of sleeper d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*

Description : “Composite sleeper index” is employed to determine a) sleeper density requirement b) number of fixtures required for a particular type of sleeper c) durability of sleeper d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*

Last Answer : d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*

If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Description : If a material has identical properties in all directions, it is called (a) Elastic (b) Plastic (c) Isotropic (d) Homogeneous

Last Answer : (c) Isotropic

which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Description : which stage represents optimum conditions for tillage a) Sticky b) Plastic c) Friable ( crumbly ). d) Hard ( cemented )

Last Answer : c) Friable ( crumbly

The property of a soil due to which water percolates through it is known as a) Porosity b) Permeability* c) Moisture content d) Capillarit

Description : The property of a soil due to which water percolates through it is known as a) Porosity b) Permeability* c) Moisture content d) Capillarit

Last Answer : b) Permeability*

The ratio of volume of water present in a given soil sample to the total volume of voids in it is known as a) Percentage of air voids b) Degree of saturation * c) Void rat

Description : The ratio of volume of water present in a given soil sample to the total volume of voids in it is known as a) Percentage of air voids b) Degree of saturation * c) Void rat

Last Answer : b) Degree of saturation *

Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The rotation of soil particles into stable state while remoulding, is known as the thiostropy of soil (C) The water content at which a soil flows, is known plastic limit of the soil (D) None of these

Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these

Last Answer : Answer: Option D

When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity

Last Answer : d) Plasticity

Which of the following soils has more plasticity index? (A) Sand (B) Silt (C) Clay (D) Gravel

Description : Which of the following soils has more plasticity index? (A) Sand (B) Silt (C) Clay (D) Gravel

Last Answer : (C) Clay