Piping in a soil mass is a) Erosion of subsoil by the high velocities of flow of water through it when such velocities exceed a certain limit* b) Caused due to very low exit gradient c) Due to continuous passage of water through a series of well connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water

Piping in a soil mass is
a) Erosion of subsoil by the high velocities of flow of water through it when such velocities  exceed a certain limit*
b) Caused due to very low exit gradient
c) Due to continuous passage of water through a series of well connected pores d) Due to loss of the strength of cohesion less soil because of upward flow of of water
by

1 Answer

Answer :

a) Erosion of subsoil by the high velocities of flow of water through it when such velocities  exceed a certain limit*
by

Related questions

Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

The seepage exit gradient in a soil is the ratio of A) Total head to the length of seepage (B) Flow line to slope (C) Head upstream to that at downstream (D) Head loss to the length of the seepage

Description : The seepage exit gradient in a soil is the ratio of A) Total head to the length of seepage (B) Flow line to slope (C) Head upstream to that at downstream (D) Head loss to the length of the seepage

Last Answer : Answer: Option D

At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Description : At the liquid limit a) The soil just begins to crumble when rolled into a thread b) The shearing strength against flowing is negligible c) The shearing strength against flowing is a small but definite* d) The soil will not get fully saturated

Last Answer : c) The shearing strength against flowing is a small but definite

The seepage force in a soil, is (A) Perpendicular to the equipotential lines (B) Proportional to the exit gradient (C) Proportional to the head loss (D) All the above

Description : The seepage force in a soil, is (A) Perpendicular to the equipotential lines (B) Proportional to the exit gradient (C) Proportional to the head loss (D) All the above

Last Answer : Answer: Option D

The minimum water content at which a reduction in water content will not cause a decrease in the volume of a soil mass is known as a) Plastic limit b) Shrinkage limit* c) Liquid limit d) Consistency limit

Description : The minimum water content at which a reduction in water content will not cause a decrease in the volume of a soil mass is known as a) Plastic limit b) Shrinkage limit* c) Liquid limit d) Consistency limit

Last Answer : b) Shrinkage limit*

Late tapping will cause defect of? (i) Lack of fusion (Heat losses)* (ii) Piping defect (iii) kidney defect (iv) All above are correct

Description : Late tapping will cause defect of? (i) Lack of fusion (Heat losses)* (ii) Piping defect (iii) kidney defect (iv) All above are correct

Last Answer : (i) Lack of fusion (Heat losses)*

Late tapping will cause defect of? (i) Lack of fusion (Heat losses)* (ii) Piping defect (iii) Half moon defect (iv) None of above

Description : Late tapping will cause defect of? (i) Lack of fusion (Heat losses)* (ii) Piping defect (iii) Half moon defect (iv) None of above

Last Answer : (i) Lack of fusion (Heat losses)*

In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Description : In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter

Last Answer : a) 5 centimeter*

The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Description : The flow in which the particles of a fluid attain such velocities that varies from point to point in magnitude and direction as well as from instant to instant, is known as (A) One dimensional flow (B) Uniform flow (C) Steady flow (D) Turbulent flow

Last Answer : Answer: Option D

A critical hydraulic gradient may occur when (A) Flow is in upward direction (B) Seepage pressure is in upward direction (C) Effective pressure is zero (D) All the above

Description : A critical hydraulic gradient may occur when (A) Flow is in upward direction (B) Seepage pressure is in upward direction (C) Effective pressure is zero (D) All the above

Last Answer : Answer: Option D

What is an upper air wind system with very high velocities in certain parts of the atmosphere?

Description : What is an upper air wind system with very high velocities in certain parts of the atmosphere?

Last Answer : Jet stream

The transfer of minerals from top soil to subsoil through soil-water is called? (1) Percolation (2) Conduction (3) Leaching (4) Transpiration

Description : The transfer of minerals from top soil to subsoil through soil-water is called? (1) Percolation (2) Conduction (3) Leaching (4) Transpiration

Last Answer : (3) Leaching Explanation: Leaching refers to the loss of water-soluble plant nutrients from the soil, due to rain and irrigation. As water from rain, flooding, or other sources seeps ... the underground water supply. Mineral nutrients lost from the soil system become unavailable for plant uptake.

The transfer of minerals from top soil to subsoil through soil-water is called? (1) Percolation (2) Conduction (3) Leaching (4) Transpiration

Description : The transfer of minerals from top soil to subsoil through soil-water is called? (1) Percolation (2) Conduction (3) Leaching (4) Transpiration

Last Answer : (3) Leaching Explanation: Leaching refers to the loss of water-soluble plant nutrients from the soil, due to rain and irrigation.

The transfer of minerals from top soil to subsoil through soil-water is called? (1) Percolation (2) Conduction (3) Leaching (4) Transpiration

Description : The transfer of minerals from top soil to subsoil through soil-water is called? (1) Percolation (2) Conduction (3) Leaching (4) Transpiration

Last Answer : Leaching

The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Description : The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Last Answer : Answer: Option C

A flow net may be utilised for the determination of (A) Exit gradient (B) Seepage (C) Hydrostatic pressure (D) All the above

Description : A flow net may be utilised for the determination of (A) Exit gradient (B) Seepage (C) Hydrostatic pressure (D) All the above

Last Answer : Answer: Option D

The consistency index of soil is a) (Natural water content - liquid limit) / plasticity index b) (Natural water content - liquid limit )/ liquidity index c) (Liquid limit - natural water content)/ consistency index d) (Liquid limit - natural water content)/plasticity index*

Description : The consistency index of soil is a) (Natural water content - liquid limit) / plasticity index b) (Natural water content - liquid limit )/ liquidity index c) (Liquid limit - natural water content)/ consistency index d) (Liquid limit - natural water content)/plasticity index*

Last Answer : d) (Liquid limit - natural water content)/plasticity index*

the exit gradient in the absence of a downstream cut-off is (A) 0 (B) Unity (C) Infinity (D) Very large

Description : the exit gradient in the absence of a downstream cut-off is (A) 0 (B) Unity (C) Infinity (D) Very large

Last Answer : Answer: Option C

The numerical difference between the liquid limit and plastic limit of a soil is known as a) Liquidity index b) Plasticity index * c) Shrinkage index d) Consistency index

Description : The numerical difference between the liquid limit and plastic limit of a soil is known as a) Liquidity index b) Plasticity index * c) Shrinkage index d) Consistency index

Last Answer : b) Plasticity index *

The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit

Description : The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit

Last Answer : b) Plasticity*

To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Description : To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Last Answer : d) 35

The urinal basin shall be connected with (a) High level floating cistern* (b) Low level floating cistern (c) Automatic floating cistern (d) Any one of the above

Description : The urinal basin shall be connected with (a) High level floating cistern* (b) Low level floating cistern (c) Automatic floating cistern (d) Any one of the above

Last Answer : (a) High level floating cistern*

Vibrations in the tubes of a shell and tube heat exchanger is induced due to the (A) Flow of fluid on the tube and shell sides (B) Oscillations in the flow of shell/tube sides fluid (C) Vibrations transmitted through piping and/or supports due to external reasons (D) All (A), (B) and (C)

Description : Vibrations in the tubes of a shell and tube heat exchanger is induced due to the (A) Flow of fluid on the tube and shell sides (B) Oscillations in the flow of shell/tube sides fluid (C) Vibrations ... piping and/or supports due to external reasons (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Description : In a continuous flow stirred tank reactor, the composition of the exit stream (A) Is same as that in the reactor (B) Is different than that in the reactor (C) Depends upon the flow rate of inlet stream (D) None of these

Last Answer : (A) Is same as that in the reactor

The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The catch water drains are provided in the a) Formation in the embankment b) Formation in cutting* c) Zero fills formation d) Steep gradient

Description : The catch water drains are provided in the a) Formation in the embankment b) Formation in cutting* c) Zero fills formation d) Steep gradient

Last Answer : b) Formation in cutting*

The clear distance between consecutive sleepers laid over unballasted bridge on BG should not exceed a)300mm b)400mm c)450mm* d)550mm

Description : The clear distance between consecutive sleepers laid over unballasted bridge on BG should not exceed a)300mm b)400mm c)450mm* d)550mm

Last Answer : c)450mm*

Clear distance between consecutive sleepers not to exceed on bridges in BG is a) 450 mm* b) 600 mm c) 510 mm d) 500 mm

Description : Clear distance between consecutive sleepers not to exceed on bridges in BG is a) 450 mm* b) 600 mm c) 510 mm d) 500 mm

Last Answer : a) 450 mm*

The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days

Description : The maximum time lag between the primer coat and the Ist finishing coat shall not exceed a) 3 days b) 7 days* c) 4 days d) 12 days

Last Answer : b) 7 days*

The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Description : The maximum time lag between surface preparation and the application of primer coat shall not exceed a) 12 hours b) 24 hours* c) 48 hours d) 36 hours

Last Answer : b) 24 hours*

Maximum distance covered in a day by a Patrolman should not normally exceed q. 2 km. r. 5 km. s. 10 km. t. 20 km .*

Description : Maximum distance covered in a day by a Patrolman should not normally exceed q. 2 km. r. 5 km. s. 10 km. t. 20 km .*

Last Answer : t. 20 km

Burns caused by steam are much severe than those caused by boiling water because – (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Description : Burns caused by steam are much severe than those caused by boiling water because – (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Last Answer : (2) Steam has latent heat Explanation: When water changes into steam, it absorbs latent heat, and when steam condenses to form water, it gives out an equal amount of latent heat. Bums caused ... boiling water, simply because steam contains more heat (in the form of latent heat) than boiling water.

Burns caused by steam are much severe than those caused by boiling water because (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Description : Burns caused by steam are much severe than those caused by boiling water because (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Last Answer : Steam has latent heat

The property of a soil due to which water percolates through it is known as a) Porosity b) Permeability* c) Moisture content d) Capillarit

Description : The property of a soil due to which water percolates through it is known as a) Porosity b) Permeability* c) Moisture content d) Capillarit

Last Answer : b) Permeability*

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Description : The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Last Answer : g) All the above*

Self cleaning velocity of a sewer line depends upon (a) Diameter of sewer (b) Gradient of ewer line (c) Type of sewerage (d) All of them*

Description : Self cleaning velocity of a sewer line depends upon (a) Diameter of sewer (b) Gradient of ewer line (c) Type of sewerage (d) All of them*

Last Answer : d) All of them*

The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Description : The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Last Answer : a) Ground contours and the gradient adopted*

The gradient of a platform is generally (a) 1 in 1000 (b) 1 in 750 (c) 1 in 500* (d) 1 in 250

Description : The gradient of a platform is generally (a) 1 in 1000 (b) 1 in 750 (c) 1 in 500* (d) 1 in 250

Last Answer : (c) 1 in 500*

The recommended maximum gradient in the year for B.G is- (a) 1 in 1000 (b) 1 in 1200* ( c) 1 in 1500 (d) 1 in 1800

Description : The recommended maximum gradient in the year for B.G is- (a) 1 in 1000 (b) 1 in 1200* ( c) 1 in 1500 (d) 1 in 1800

Last Answer : (b) 1 in 1200*

The maximum gradient in station yards should be ……. Unless special safely devices are adopted and/or special rules enforced. (a) 1 in 400* (B) 1 in 500 (c) 1 in 1000 (D) 1 In 600

Description : The maximum gradient in station yards should be ……. Unless special safely devices are adopted and/or special rules enforced. (a) 1 in 400* (B) 1 in 500 (c) 1 in 1000 (D) 1 In 600

Last Answer : (a) 1 in 400*

In a semi permanent (BG) diversion the gradient should not be steeper then (a) 1 in 75 (b) 1 in 125 (c) 1 in 100* (d) 1 in 150

Description : In a semi permanent (BG) diversion the gradient should not be steeper then (a) 1 in 75 (b) 1 in 125 (c) 1 in 100* (d) 1 in 150

Last Answer : (c) 1 in 100*

In a semi permanent (BG) diversion the gradient should not be steeper then (a) 1 in 75 (b) 1 in 125 (c) 1 in 100 * (d) 1 in 150

Description : In a semi permanent (BG) diversion the gradient should not be steeper then (a) 1 in 75 (b) 1 in 125 (c) 1 in 100 * (d) 1 in 150

Last Answer : (c) 1 in 100 *

The ruling gradient is 1 in 200 on a section of the BG track. If the track is laid in that place at a curve of 5 degrees then the allowable ruling gradient on the curve will be a) 1 in 16.7 b) 1 and 400 c) 1 in 240 d) 1 in 333*

Description : The ruling gradient is 1 in 200 on a section of the BG track. If the track is laid in that place at a curve of 5 degrees then the allowable ruling gradient on the curve will be a) 1 in 16.7 b) 1 and 400 c) 1 in 240 d) 1 in 333*

Last Answer : d) 1 in 333*

Rising gradient followed by a falling gradient is known as a) Rulling gradient b) Momentum gradient* c) Pusher graient d) Aangular gradient

Description : Rising gradient followed by a falling gradient is known as a) Rulling gradient b) Momentum gradient* c) Pusher graient d) Aangular gradient

Last Answer : b) Momentum gradient

Steep gradients which need extra engine for hauling is known as a) Pusher gradient* b) Rulling Gradient c) Reasonable gradient d) Momentum gradient

Description : Steep gradients which need extra engine for hauling is known as a) Pusher gradient* b) Rulling Gradient c) Reasonable gradient d) Momentum gradient

Last Answer : a) Pusher gradient

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

River erosion is at its greatest where river's – (1) depth is more (2) breadth is more (3) flow is fast (4) gradient is more

Description : River erosion is at its greatest where river's – (1) depth is more (2) breadth is more (3) flow is fast (4) gradient is more

Last Answer : (3) flow is fast Explanation: The outer bank (called a cut bank) has the greatest erosion because the water is flowing faster along the outer bank than the inner bank. The slower water allows sediment to be deposited (called a point bar).

Defect of low joint is due to? (i) Excess height (ii) Early trimming of weld (iii) Early grinding of weld (iv) Nil/Less provision of height during alignment.

Description : Defect of low joint is due to? (i) Excess height (ii) Early trimming of weld (iii) Early grinding of weld (iv) Nil/Less provision of height during alignment.

Last Answer : (iv) Nil/Less provision of height during alignment.