The admixture of coarser particles like sand or silt to clay causes
(A) Decrease in liquid limit and increase in plasticity index
(B) Decrease in liquid limit and no change in plasticity index
(C) Decrease in both liquid limit and plasticity index
(D) Increase in both liquid limit and plasticity index

1 Answer

Answer :

Answer: Option C

Related questions

Description : Which of the following soils has more plasticity index? (A) Sand (B) Silt (C) Clay (D) Gravel

Last Answer : (C) Clay

Description : the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Last Answer : (A) Sand

Description : In soils having same values of plasticity index, if liquid limit is increased, then (A) Compressibility and permeability decrease and dry strength increases (B) Compressibility, ... permeability and dry strength increase (D) Compressibility and permeability increase and dry strength decreases

Last Answer : Answer: Option D

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

Description : Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Last Answer : Ans: (b)

Description : The plasticity index is the numerical difference between (A) Liquid limit and plastic limit (B) Plastic limit and shrinkage limit (C) Liquid limit and shrinkage limit (D) None of these

Last Answer : (A) Liquid limit and plastic limit

Description : The liquidity index is defined as a ratio expressed as percentage of (A) Plastic limit minus the natural water content, to its plasticity index (B) Natural water content minus its plastic limit ... to its plasticity index (D) Liquid limit minus the natural water content to the plasticity index

Last Answer : (B) Natural water content minus its plastic limit to its plasticity index

Description : When the plastic limit of a soil is greater than the liquid limit, then the plasticity index is reported as (A) Negative (B) Zero (C) Non-plastic (NP) (D) 1

Last Answer : (B) Zero

Description : The consistency index of a soil is defined as the ratio of (A) Liquid limit plus the natural water content to the plasticity index of the soil (B) Liquid limit minus the natural water content to ... (D) Natural water content of a soil plus its plastic limit to the plasticity index of the soil

Last Answer : Answer: Option B

Description : The water content of soil, which represents the boundary between plastic state and liquid state, is known as (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Plasticity index

Last Answer : Answer: Option A

Description : Plasticity index is defined as the range of water content between (A) Liquid and plastic limit (B) Plastic limit and semi solid limit (C) Semi-solid limit and liquid limit (D) Liquid limit and solid limit

Last Answer : Answer: Option A

Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Last Answer : Answer: Option D

Description : Pick up the correct statement from the following: (A) The range of water content between the liquid limit and plastic limit is called plasticity index (B) The ratio of the liquid limit minus ... content minus its plastic limit to its plasticity index is called liquidity index (D) All the above

Last Answer : Answer: Option D

Description : The group index for a soil, whose liquid limit is 40 percent, plasticity index is 10 percent and percentage passing 75 micron IS sieve (A) 0 (B) 3 (C) 5 (D) 7

Last Answer : Answer: Option A

Description : A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Last Answer : (C) Coarse gravel

Description : A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Last Answer : (C) Coarse gravel

Description : The specific retention is least in case of (A) Clay (B) Sand (C) Silt (D) Coarse gravel

Last Answer : (D) Coarse gravel

Description : If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Last Answer : (B) Sand

Description : Cohesionless soil is (A) Sand (B) Silt (C) Clay (D) Clay and silt

Last Answer : (A) Sand

Description : Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Last Answer : Answer: Option B

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

Description : Fine sand possesses (A) Good plasticity (B) Limited plasticity (C) Reasonable plasticity (D) clay

Last Answer : (D) Clay

Description : Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Last Answer : (c) Increases with shear strength for a given clay content

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

Description : Plasticity index represents the range of water content between a) Liquid and plastic limit * b) Plastic limit and semi solid limit c) Semisolid Limit and liquid limit d) Liquid limit and solid limit.

Last Answer : a) Liquid and plastic limit *

Description : The consistency index of soil is a) (Natural water content - liquid limit) / plasticity index b) (Natural water content - liquid limit )/ liquidity index c) (Liquid limit - natural water content)/ consistency index d) (Liquid limit - natural water content)/plasticity index*

Last Answer : d) (Liquid limit - natural water content)/plasticity index*

Description : The numerical difference between the liquid limit and plastic limit of a soil is known as a) Liquidity index b) Plasticity index * c) Shrinkage index d) Consistency index

Last Answer : b) Plasticity index *

Description : Define Liquid limit, Plastic Limit, Shrinkage limit and Plasticity index.

Last Answer : Liquid limit (WL) - It is minimum water content at which two separated grooved soil parts mixed together under 25 blows of casagrande's liquid limit apparatus; is called as liquid limit. Plastic limit (Wp ... difference between the liquid limit (WL) and plastic limit (Wp). IP = WL - Wp

Description : What is the name of the soil that is 60 silt 20 sand and 20 clay?

Last Answer : Need answer

Description : What is a type of soil that has significant amounts of sand silt and clay.?

Last Answer : Loamy Soil.

Description : The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Last Answer : Ans: (a)

Description : Match the following : A. Chernozems 1. Rich in calcium carbonate B. Black soil 2. Contains aluminium compound C. Laterite 3. Richest soils in the world D. Terra Rosa 4. Formed in limestone E. Alluvial soil 5. It is a mixture of clay, sand and ... 1 2 3 4 5 (b) 3 1 2 4 5 (c) 4 5 3 1 2 (d) 3 4 5 2 1

Last Answer : Ans: (b)

Description : The relative proportion of sand, silt and clay is termed as

Last Answer : Ans. Soil texture

Description : Deep black soil is productive due to high proportion of (a) sand and zinc (b) gravel and calcium (c) clay and humus (d) silt and earthworm.

Last Answer : (c) clay and humus

Description : The relative proportion of sand, silt and clay is called (A) Soil texture (B) Soil aggregation (C) Soil structure (D) Soil taxonomy

Last Answer : (A) Soil texture

Description : Rapid gravity filters  (A) Were developed by G.W. Fuller  (B) Make use of coarser sand with effective size as 0.5 mm  (C) Yield as high as 30 times the yield of slow sand filters  (D) All the above 

Last Answer : (D) All the above 

Description : Particles of 0.002 mm size are that of (A) Clay (B) Sand (C) Gravel (D) None of these

Last Answer : Answer: Option A

Description : Turbidity of water may be caused due to  (A) Suspended clay  (B) Suspended silt  (C) Finely divided organic material  (D) All the above 

Last Answer : (D) All the above 

Description : Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %

Last Answer : Answer: Option A

Description : For preparing porcelains, the clay should be (A) Sufficiently pure (B) Of high degree of tenacity (C) Of good plasticity (D) All the above

Last Answer : Answer: Option D

Description : The compression index of a soil (A) Decreases with an increase in the liquid limit (B) Increases with an increase in the liquid limit (C) Decreases with an increase in the plastic limit (D) Is not related with plastic limit

Last Answer : Answer: Option B

Description : If the material of the base of the Casagrande liquid limit device on which the cup containing soil paste drops is softer than the standard hard rubber, then (A) The liquid limit of soil always increases ... (C) The liquid limit of soil may increase (D) The liquid limit of soil may decrease

Last Answer : Answer: Option A

Description : High quality crop soil requires humus as a major component. Which of the following best describes the composition of humus w) fine sand particles x) decaying organic matter y) mineral like clay matter z) chemical fertilizers

Last Answer : ANSWER: X -- DECAYING ORGANIC MATTER 

Description : Minimum size of the particles of silt soil, is (A) 0.002 mm (B) 0.04 mm (C) 0.06 mm (D) 0.08 mm

Last Answer : (A) 0.002 mm

Description : According to IS classification, the range of silt size particles is (A) 4.75 mm to 2.00 mm (B) 2.00 mm to 0.425 mm (C) 0.425 mm to 0.075 mm (D) 0.075 mm to 0.002 mm

Last Answer : (D) 0.075 mm to 0.002 mm

Description : Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm ( ... having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Last Answer : Answer: Option D

Description : The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Last Answer : (D) Clay soils

Description : Within the consolidation process of a saturated clay (A) A gradual increase in neutral pressure and a gradual decrease in effective pressure take place and sum of the two is ... Both neutral pressure and effective pressure decrease (D) Both neutral pressure and effective pressure increase

Last Answer : Answer: Option B

Description : According to Atterberg, the soil is said to be of medium plasticity if the plasticity index PI is (A) 0 < PI < 7 (B) 7< PI < 17 (C) 17 < PI 27

Last Answer : (B) 7< PI < 17

Description : Toughness index is defined as the ratio of (A) Plasticity index to consistency index (B) Plasticity index to flow index (C) Liquidity index to flow index (D) Consistency index to liquidity index

Last Answer : (B) Plasticity index to flow index