Unit of frequency is ________________. A. Hz B. Horton C. dB D. Coulomb

Unit of frequency is ________________. A. Hz B. Horton C. dB D. Coulomb
by

1 Answer

Answer :

Unit of frequency is Hz.

by

Related questions

What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000

Last Answer : C. 125,000

At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Description : At what loudness level do pitch (in mels) and frequency (in Hz) are numerically equal? A. 0 dB B. 20 dB C. 60 dB D. 40 dB

Last Answer : D. 40 dB

The frequency-response specification of your tape recorder reads within +/ - 3 dB from 150 Hz to 150 kHz at 60 ips. What does this mean?

Description : The frequency-response specification of your tape recorder reads within +/ - 3 dB from 150 Hz to 150 kHz at 60 ips. What does this mean?

Last Answer : The recorder can record all frequencies between 150 Hz and 150 kHz at 60 ips without varying the output amplitude more than 3 dB.

Is Robert Horton gay?

Description : Is Robert Horton gay?

Last Answer : it has been told he did enjoy the male species---he was a mansman

According to Robert E. Horton, the equation of infiltration capacity curve, is (where letters carry their usual meanings) (A) f = fc (fo - fc ) e kt (B) f = ft - (fo - fc ) e -kt (C) f = ft + (fo - fc ) e -kt (D) f = f + (fo - fc ) ekt

Description : According to Robert E. Horton, the equation of infiltration capacity curve, is (where letters carry their usual meanings) (A) f = fc (fo - fc ) e kt (B) f = ft - (fo - fc ) e -kt (C) f = ft + (fo - fc ) e -kt (D) f = f + (fo - fc ) ekt

Last Answer : Answer: Option C

The equation P - Q = Te index for determining the infiltration capacity, was suggested by (A) Horton (B) Horner (C) Lloyd (D) Bernard

Description : The equation P - Q = Te index for determining the infiltration capacity, was suggested by (A) Horton (B) Horner (C) Lloyd (D) Bernard

Last Answer : Answer: Option A

The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Description : The agreed standard for measuring loudness is the loudness sensation produced by a 1000 Hz sine wave _____ dB above the listener’s threshold of hearing. A. 80 B. 50 C. 30 D. 40

Last Answer : D. 40

Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb

Description : Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb 

Last Answer : Unit of Power is Watt. 

The unit of natural frequency is A. Rad/sec B. Hz C. Both D. No unit

Description : The unit of natural frequency is A. Rad/sec B. Hz C. Both D. No unit

Last Answer : C. Both

The line trap unit employed in carrier current relaying: (A) offers high impedance to 50 Hz power frequency signal (B) offers high impedance to carrier frequency signal (C) offers low impedance to carrier frequency signal (D) Both (A) & (C)

Description : The line trap unit employed in carrier current relaying: (A) offers high impedance to 50 Hz power frequency signal (B) offers high impedance to carrier frequency signal (C) offers low impedance to carrier frequency signal (D) Both (A) & (C)

Last Answer : Ans: B The line trap unit employed in carrier current relaying offers high impedance to carrier frequency signal. Because carrier frequency range is 35 km – 500 kHz XL = 2Π f l Where f increases XL will also increases

In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration

Description : In coulomb damping the frequency of damped vibrations is A Equal to that of undamped vibrations B Less than that of undamped vibrationsC More than that of undamped vibrations D Independent of the frequency of undamped vibration

Last Answer : A Equal to that of undamped vibrations

The smallest unit of data in computer is ________________ a) Byte b) Nibble c) Bit d) KB

Description : The smallest unit of data in computer is ________________ a) Byte b) Nibble c) Bit d) KB

Last Answer : Answer: c Explanation: A bit is defined as the smallest unit of data in a computer system. It is used as a short form of Binary Digit. A bit can have only two values 0 or 1. A nibble comprises of 4 bits, a byte is a collection of 8 bits whereas KB (Kilobyte) is equal to 1024 bytes

As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Description : As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Last Answer : Answer: A

The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Description : The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Last Answer : (2) coulomb Explanation: The SI unit of quantity of electric charge is the coulomb, which is equivalent to about 6.242x10^18 e (e is the charge of a proton). Hence, the charge of ... of charge that has passed through the cross section of an electrical conductor canying one ampere within one second.

The basic measuring unit of inductance is the _________. A. coulomb B. ohm C. farad D. henry

Description : The basic measuring unit of inductance is the _________. A. coulomb B. ohm C. farad D. henry

Last Answer : Answer: D

Coulomb is the scientific unit to measure? A. Velocity B. Temperature C. Mass D. None OF These (Answer)

Description : Coulomb is the scientific unit to measure? A. Velocity B. Temperature C. Mass D. None OF These (Answer)

Last Answer : D. None OF These (Answer)

The SI unit of charge is -----? A. Ampere B. Coulomb (Answer) C. Ohm D. Volt

Description : The SI unit of charge is -----? A. Ampere B. Coulomb (Answer) C. Ohm D. Volt

Last Answer : B. Coulomb (Answer)

Coulomb is the unit of which quantity? a) Field strength b) Charge c) Permittivity d) Force

Description : Coulomb is the unit of which quantity? a) Field strength b) Charge c) Permittivity d) Force

Last Answer : b) Charge

The S.I. unit of power is (a) Henry (b) coulomb (c) watt (d) watt-hour

Description : The S.I. unit of power is (a) Henry (b) coulomb (c) watt (d) watt-hour

Last Answer : (c) watt

SI unit of gain of amplifier is (a) Volt (b) ampere (c) coulomb (d) dimensionless

Description : SI unit of gain of amplifier is (a) Volt (b) ampere (c) coulomb (d) dimensionless

Last Answer : (d) dimensionless

The S.I Unit of Modulus elasticity is: a) Pascal b) Coulomb c) Ampere d) None

Description : The S.I Unit of Modulus elasticity is: a) Pascal b) Coulomb c) Ampere d) None

Last Answer : a) Pascal

The unit Nm–2 is also called a) Coulomb b) Newton c) Pascal d) Ampere

Description : The unit Nm–2 is also called a) Coulomb b) Newton c) Pascal d) Ampere

Last Answer : c) Pascal

The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Description : The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Last Answer : (c) Coulomb

The SI unit of charge is: (a) Coulomb (b) Calorie (c) Ampere (d) Joule

Description : The SI unit of charge is: (a) Coulomb (b) Calorie (c) Ampere (d) Joule

Last Answer : a) Coulomb

The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Description : The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Last Answer : coulomb

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to

Description : What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to a 500 Hz (frequency) source of the same voltage:  (A) Eddy Current and Hysteresis losses will be ... Current will be too much high  (C) Transformer may start to smoke and burn  (D) No effect

Last Answer : What would happen if a power transformer designed for operation on 50 Hz (frequency) were connected to a 500 Hz (frequency) source of the same voltage:  (A) Eddy Current and Hysteresis losses will be ... will be too much high  (C) Transformer may start to smoke and burn  (D) No effect

What is the reactance of a 3H inductor when the frequency is 120 Hz?

Description : What is the reactance of a 3H inductor when the frequency is 120 Hz? A. 2260 ohm B. 2060 ohm C. 360 ohm D. 0  

Last Answer : 2260 ohm is the reactance of a 3H inductor when the frequency is 120 Hz.

lf slip of an induction machine is 0.02 and the stator supply frequency is 50 Hz, what will be the frequency...

Description : lf slip of an induction machine is 0.02 and the stator supply frequency is 50 Hz, what will be the frequency of the rotor induced e.m.f.? (A) 10 Hz (B) 50 Hz (C) 1 Hz (D) 2500 Hz

Last Answer : 1hz

For a frequency of 200 Hz, the time period will be?

Description : For a frequency of 200 Hz, the time period will be?

Last Answer : For a frequency of 200 Hz, the time period will be 0.005 s.

The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q....

Description : The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q. If frequency is increased to 100 Hz, reactance becomes_____ohms.

Last Answer : The reactance offered by a capacitor to alternating current of frequency 50 Hz is 20 Q. If frequency is increased to 100 Hz, reactance becomes 10 ohms.

A sine wave has a frequency of 50 Hz. Its angular frequency is _______ radian/second.

Last Answer :  A sine wave has a frequency of 50 Hz. Its angular frequency is 100 n radian/second.

if voltage is 230 Volts , frequency is 50 Hz and current is 1 ampere then what will be the resistance?

Description : if voltage is 230 Volts , frequency is 50 Hz and current is 1 ampere then what will be the resistance?

Last Answer : As V = 230v and I = 1A Therfore by ohm's law V =IR R = V/I =230/1 =230 ohm

If 120 Coulomb of charge passes through a conductor in 60 sec, the current in the conductor is

Description : If 120 Coulomb of charge passes through a conductor in 60 sec, the current in the conductor is

Last Answer : If 120 Coulomb of charge passes through a conductor in 60 sec, the current in the conductor is 2 A

If eight -tenths coulomb passes a point in 4 s, the value of current is equal to:

Description : If eight -tenths coulomb passes a point in 4 s, the value of current is equal to: A. 1.6 A B. 16 A C. 2 A D. 0.2 A

Last Answer : If eight -tenths coulomb passes a point in 4 s, the value of current is equal to: 0.2 A

The charge on an electron is known to be 1.6 x 10-19 coulomb. In a...

Description :  The charge on an electron is known to be 1.6 x 10-19 coulomb. In a circuit the current flowing is 1 A. How many electrons will be flowing through the circuit in a second? 

Last Answer :  0.625 x 1019

When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Description : When the elevation angle of a geostationary satellite is 23˚ and the transmitting frequency is 3840 MHz, what is the free space loss in dB? A. 196 dB B. 200 dB C. 150 dB D. 100 dB

Last Answer : A. 196 dB

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Last Answer : A. 0.871 μW

How does the gain of a parabolic dish type antenna change when the operating frequency is doubled? A. Gain does not change B. Gain is multiplied by 0.707 C. Gain increases 6 dB D. Gain increases 3 dB

Description : How does the gain of a parabolic dish type antenna change when the operating frequency is doubled? A. Gain does not change B. Gain is multiplied by 0.707 C. Gain increases 6 dB D. Gain increases 3 dB

Last Answer : C. Gain increases 6 dB

What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Description : What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB

Last Answer : C. 179dB

While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Description : While measuring frequency response, as the signal generator approaches the lowest and highest frequency the recorder can effectively record, the VTVM reading drops to less than - 3 dB. What does this indicate?

Last Answer : The upper and lower limits of the frequency response specification for that tape recorder.

Describe the -3 decibel (dB) optical power frequency (f3dB).

Description : Describe the -3 decibel (dB) optical power frequency (f3dB).

Last Answer : The -3 decibel (dB) is the lowest frequency at which the magnitude of the fiber frequency response has decreased to one half its zero-frequency value.

In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the

Description : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the (A) applied load (B) internal compensation (C) impedance of the source (D) power dissipation in the chip

Last Answer : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the internal compensation

The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for

Description : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for

Last Answer : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for all frequencies

A 3 phase 50 Hz induction motor has full load speed of 970 rpm. Calculate no of poles and slip frequency.

Description : A 3 phase 50 Hz induction motor has full load speed of 970 rpm. Calculate no of poles and slip frequency.

Last Answer : The number of poles in an induction motor can be calculated using the following formula: No. of poles = (120 * frequency) / speed In this case, the number of poles would be calculated as follows: No. of poles = ( ... ) - 50 Hz = 8.08 Hz So the motor has 6 poles and a slip frequency of 8.08 Hz.

Heating 235 g of water from 22.6 degrees C to 94.4 degrees C in a microwave oven requires 7.06x10^4 J of energy. If the microwave frequency is 2.88x10^10 Hz, how many quanta are required to supply the 7.06x10^4 J?

Description : Heating 235 g of water from 22.6 degrees C to 94.4 degrees C in a microwave oven requires 7.06x10^4 J of energy. If the microwave frequency is 2.88x10^10 Hz, how many quanta are required to supply the 7.06x10^4 J?

Last Answer : answer:Guidelines. I don’t mean to be the bearer of bad news…

The frequency of a source of sound is 200 hz.How many Times does it vibrate in 2 min? -Physics

Description : The frequency of a source of sound is 200 hz.How many Times does it vibrate in 2 min? -Physics

Last Answer : Hence, the source vibrates 12000 times in a minute, producing a frequency of 00 Hz.

which of the following animals could detect sound at a frequency of 67,000 hz? -General Knowledge

Description : which of the following animals could detect sound at a frequency of 67,000 hz? -General Knowledge

Last Answer : Dogs could detect sound at a frequency of 67,000 Hz.

The mean velocity of blood flow in the aorta during systole is 1.5 × 10–2 m / s. What is the frequency change in an instrument with a signal frequency of 105 Hz (speed of sound in blood, 1570 m / s)?

Description : The mean velocity of blood flow in the aorta during systole is 1.5 × 10–2 m / s. What is the frequency change in an instrument with a signal frequency of 105 Hz (speed of sound in blood, 1570 m / s)?

Last Answer : 1060 kg/m3, very close to pure water's density of 1000 kg/m3. The average adult has a blood volume of roughly 5 litres (11 US pt) or 1.3 gallons, which is composed of plasma ... .4 million (female) erythrocytes: Red blood cells contain the blood's hemoglobin and distribute oxygen. Mature red blood