The S.I Unit of Modulus elasticity is: a) Pascal b) Coulomb c) Ampere d) None

The S.I Unit of Modulus elasticity is:
a) Pascal b) Coulomb c) Ampere d) None
by

1 Answer

Answer :

a) Pascal
by

Related questions

The unit Nm–2 is also called a) Coulomb b) Newton c) Pascal d) Ampere

Description : The unit Nm–2 is also called a) Coulomb b) Newton c) Pascal d) Ampere

Last Answer : c) Pascal

SI unit of gain of amplifier is (a) Volt (b) ampere (c) coulomb (d) dimensionless

Description : SI unit of gain of amplifier is (a) Volt (b) ampere (c) coulomb (d) dimensionless

Last Answer : (d) dimensionless

The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Description : The SI unit of charge is: (a) Meter (b) Ampere (c) Coulomb (d) Volt

Last Answer : (c) Coulomb

The SI unit of charge is: (a) Coulomb (b) Calorie (c) Ampere (d) Joule

Description : The SI unit of charge is: (a) Coulomb (b) Calorie (c) Ampere (d) Joule

Last Answer : a) Coulomb

Farad is defined as: a. Coulomb / volt b. Ampere / volt c. Coulomb / joule d. Joule / Coulomb

Description : Farad is defined as: a. Coulomb / volt b. Ampere / volt c. Coulomb / joule d. Joule / Coulomb

Last Answer : d. Joule / Coulomb

When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above

Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above

Last Answer : (a) One coulomb

S.I unit of strain is a) Newton b) N m–2 c) Pascal d) no unit

Description : S.I unit of strain is a) Newton b) N m–2 c) Pascal d) no unit

Last Answer : a) Newton

The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Description : The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Last Answer : (2) coulomb Explanation: The SI unit of quantity of electric charge is the coulomb, which is equivalent to about 6.242x10^18 e (e is the charge of a proton). Hence, the charge of ... of charge that has passed through the cross section of an electrical conductor canying one ampere within one second.

The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Description : The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Last Answer : coulomb

The unit of inductance is: a. Volt b. Ampere c. Henry d. Ohm

Description : The unit of inductance is: a. Volt b. Ampere c. Henry d. Ohm

Last Answer : c. Henry

The SI unit of charge is -----? A. Ampere B. Coulomb (Answer) C. Ohm D. Volt

Description : The SI unit of charge is -----? A. Ampere B. Coulomb (Answer) C. Ohm D. Volt

Last Answer : B. Coulomb (Answer)

Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb

Description : Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb 

Last Answer : Unit of Power is Watt. 

Coulomb Who Say ?

Last Answer : any Conductive The middle With One Ampere Flow One Seconds Hold on Let's go Of Any Cross section With That Amount Infusion Flowing Is Him One Coulomb Says.

A charge of 2 coulomb is in a field of intensity 2 N/C. The force on charge is: (a) 4 π N (b) 4 N (c) 0 N (d) 1 N

Description : A charge of 2 coulomb is in a field of intensity 2 N/C. The force on charge is: (a) 4 π N (b) 4 N (c) 0 N (d) 1 N

Last Answer : b) 4 N

The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Description : The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Last Answer : (a) 6.2 × 1018 electrons

The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Description : The unit of bulk modulus of elasticity for a liquid in S.I. unit is (A) N (B) N/m (C) N/m2 (D) N/m3

Last Answer : (C) N/m2

In the reverse biased p-n junction, the current is of the order of (a) Ampere (b) Milliampere (c) Microampere (d) Nano-ampere

Description : In the reverse biased p-n junction, the current is of the order of (a) Ampere (b) Milliampere (c) Microampere (d) Nano-ampere

Last Answer : (d) Nano-ampere

Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Description : Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Last Answer : b) 250

If 1 ampere current flows through 2m long conductor the charge flow through it in 1 hour will be a. 3600C b. 7200C c. 1C d. 2C

Description : If 1 ampere current flows through 2m long conductor the charge flow through it in 1 hour will be a. 3600C b. 7200C c. 1C d. 2C

Last Answer : a. 3600C

What is the SI unit of Young’s modulus of elasticity? -Do You Know?

Description : What is the SI unit of Young’s modulus of elasticity? -Do You Know?

Last Answer : answer:

What is the SI unit of Young’s modulus of elasticity?

Description : What is the SI unit of Young’s modulus of elasticity?

Last Answer : Newton/m2

How are ampere and coulomb related?

Description : How are ampere and coulomb related?

Last Answer : A Coulomb is the SI unit of electric charge, equal to thequantity of electricity conveyed in one second by a current of oneampere.

Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Description : Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Last Answer : Answers: (i) Voltage (ii) Charge of Electricity (iii) Power (iv) Resistance (v) Conductivity (vi) Current (vii) Force (viii) Temperature (ix) Energy (x) Heat

The propagation of the electromagnetic waves can be illustrated by a) Faraday law b) Ampere law c) Flemming rule d) Coulomb law

Description : The propagation of the electromagnetic waves can be illustrated by a) Faraday law b) Ampere law c) Flemming rule d) Coulomb law

Last Answer : c) Flemming rule

Maxwell second equation is based on which law? a) Ampere law b) Faraday law c) Lenz law d) Coulomb law

Description : Maxwell second equation is based on which law? a) Ampere law b) Faraday law c) Lenz law d) Coulomb law

Last Answer : a) Ampere law

The Coulomb law is an implication of which law? a) Ampere law b) Gauss law c) Biot Savart law d) Lenz law

Description : The Coulomb law is an implication of which law? a) Ampere law b) Gauss law c) Biot Savart law d) Lenz law

Last Answer : b) Gauss law

One mole of electrons is known as: w) a Faraday x) a Henry y) a Coulomb z) an Ampere

Description : One mole of electrons is known as: w) a Faraday x) a Henry y) a Coulomb z) an Ampere

Last Answer : ANSWER: W -- A FARADAY

The reflective index numberis a. anumberwhichcomparesthe transparencyof amaterialwiththatof air b. a number assigned by the manufacturer to the fiber in question c. a number which determines the core diameter d. a term for describing core elasticity

Description : The reflective index numberis a. anumberwhichcomparesthe transparencyof amaterialwiththatof air b. a number assigned by the manufacturer to the fiber in question c. a number which determines the core diameter d. a term for describing core elasticity

Last Answer : a. anumberwhichcomparesthe transparencyof amaterialwiththatof air

The S.I. unit of Rydberg’s constant is a) m-2 b) m-1 c) cm-1 d) cm-2

Description : The S.I. unit of Rydberg’s constant is a) m-2 b) m-1 c) cm-1 d) cm-2

Last Answer : b) m-1

S.I unit of stress is: a) N/m b) N m c) Nm–2 d) Newton

Description : S.I unit of stress is: a) N/m b) N m c) Nm–2 d) Newton

Last Answer : c) Nm–2

The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Description : The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Last Answer : e. ML-1T-2

Dimension of modulus of elasticity is (a) ML–2T–2 (b) M–1L–1T–2 (c) ML–1T–2 (d) ML–1T–1

Description : Dimension of modulus of elasticity is (a) ML–2T–2 (b) M–1L–1T–2 (c) ML–1T–2 (d) ML–1T–1

Last Answer : Ans:(c)

The dimensional formula ML⁻¹T⁻² corresponds to – (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Description : The dimensional formula ML⁻¹T⁻² corresponds to – (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Last Answer : (1) Modulus of elasticity Explanation: M Li- T-2 is the dimension of any quantity that is force per unit area such as Pressure or Stress, Young's Modulus, Bulk Modulus, Modulus of Rigidity, ... the ratio of the stress applied to a body or substance to the resulting strain within the elastic limit.

Which of the following mechanical properties of a material is most structure insensitive? (A) Modulus of elasticity (young's modulus) (B) Toughness (C) Percentage reduction of area (D) Tensile strength

Description : Which of the following mechanical properties of a material is most structure insensitive? (A) Modulus of elasticity (young's modulus) (B) Toughness (C) Percentage reduction of area (D) Tensile strength

Last Answer : (A) Modulus of elasticity (young's modulus)

Approximate value of the modulus of elasticity for steel is about __________ × 10 6kg/cm2 . (A) 0.5 (B) 2 (C) 40 (D) 75

Description : Approximate value of the modulus of elasticity for steel is about __________ × 10 6kg/cm2 . (A) 0.5 (B) 2 (C) 40 (D) 75

Last Answer : (B) 2

Velocity of sound waves through any material depends on A. the material's density ‘d’ only B. the material's density ‘d’ as well as its modulus of elasticity ‘E’ C. the material's modulus of elasticity ‘E’ only D. neither the material's density ‘d’ nor its modulus of elasticity ‘E’

Description : Velocity of sound waves through any material depends on A. the material's density ‘d’ only B. the material's density ‘d’ as well as its modulus of elasticity ‘E’ C. the material's modulus of elasticity ‘E’ only D. neither the material's density ‘d’ nor its modulus of elasticity ‘E’

Last Answer : the material's density ‘d’ as well as its modulus of elasticity ‘E’

Speed ‘v’ with which wave travels through a medium is given by A. modulus of elasticity/density of the medium B. modulus of elasticity/√(density of the medium) C. √(modulus of elasticity/density of the medium) D. v=d/t

Description : Speed ‘v’ with which wave travels through a medium is given by A. modulus of elasticity/density of the medium B. modulus of elasticity/√(density of the medium) C. √(modulus of elasticity/density of the medium) D. v=d/t

Last Answer : √(modulus of elasticity/density of the medium)

Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness

Last Answer : a) Modulus of elasticity

The ability of a material to resist plastic deformation known as _____________ a) Tensile strength b) Yield strength c) Modulus of elasticity d) Impact strength

Description : The ability of a material to resist plastic deformation known as _____________ a) Tensile strength b) Yield strength c) Modulus of elasticity d) Impact strength

Last Answer : b) Yield strength

The bulk modulus of elasticity of a liquid (A) Is zero for incompressible liquid (B) Decreases with pressure (C) Is independent of temperature & pressure (D) Increases with pressure

Description : The bulk modulus of elasticity of a liquid (A) Is zero for incompressible liquid (B) Decreases with pressure (C) Is independent of temperature & pressure (D) Increases with pressure

Last Answer : (D) Increases with pressure

For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Description : For an incompressible fluid, the bulk modulus of elasticity is (A) 5 kg/m3 (B) ∞ N/m2 (C) 1 N (D) 0 N/m

Last Answer : (B) ∞ N/m2

The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)

Description : The ratio of shear stress and shear strain of an elastic material, is  (A) Modulus of Rigidity  (B) Shear Modulus  (C) Modulus of Elasticity  (D) Both (a) and (b) 

Last Answer : (D) Both (a) and (b) 

A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2 MN/mm2 and Poisson's ratio is 0.25, the change in the volume of the bar is: (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm

A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2 , the deflection of the free end, is (A) 2 mm (B) 3 mm (C) 4 mm (D) 5 mm

Description : A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free  end. If the modulus of elasticity of the material is 0.2 × 106  N/mm2 , the deflection of the free end,  is  (A) 2 mm  (B) 3 mm  (C) 4 mm  (D) 5 mm

Last Answer : (D) 5 mm

If M, I, R, E, F, and Y are the bending moment, moment of inertia, radius of curvature, modulus of elasticity stress and the depth of the neutral axis at section, then (A) M/I = R/E = F/Y (B) I/M = R/E = F/Y (C) M/I = E/R = E/Y (D) M/I = E/R = Y/F

Description : If M, I, R, E, F, and Y are the bending moment, moment of inertia, radius of curvature, modulus of  elasticity stress and the depth of the neutral axis at section, then  (A) M/I = R/E = F/Y (B) I/M = R/E = F/Y (C) M/I = E/R = E/Y (D) M/I = E/R = Y/F

Last Answer : (C) M/I = E/R = E/Y

If E, N, K and 1/m are modulus of elasticity, modulus of rigidity. Bulk modulus and Poisson ratio of the material, the following relationship holds good (A) E = 3K (1 - 2/m) (B) E = 2N (1 + 1/m) (C) (3/2)K (1 - 2/m) = N (1 + 1/m) (D) All the above

Description : If E, N, K and 1/m are modulus of elasticity, modulus of rigidity. Bulk modulus and Poisson ratio of  the material, the following relationship holds good  (A) E = 3K (1 - 2/m)  (B) E = 2N (1 + 1/m)  (C) (3/2)K (1 - 2/m) = N (1 + 1/m)  (D) All the above 

Last Answer : (D) All the above 

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)? (A) High speed steel (B) Stainless steel (C) Tungsten carbide (D) Superalloys

Description : Which of the following has the highest modulus of elasticity (about 7 × 106 kg/cm2)? (A) High speed steel (B) Stainless steel (C) Tungsten carbide (D) Superalloys

Last Answer : (C) Tungsten carbide

The Young's modulus of elasticity of steel, is (A) 150 KN/mm2 (B) 200 KN/mm2 (C) 250 KN/mm2 (D) 275 KN/mm

Description : The Young's modulus of elasticity of steel, is (A) 150 KN/mm2 (B) 200 KN/mm2 (C) 250 KN/mm2 (D) 275 KN/mm

Last Answer : Answer: Option D