The S.I. unit of power is (a) Henry (b) coulomb (c) watt (d) watt-hour

The S.I. unit of power is
(a) Henry
(b) coulomb
(c) watt
(d) watt-hour
by

1 Answer

Answer :

(c) watt
by

Related questions

Which of the following is not a unit of flux? (a) Maxwell (b) Telsa (c) Weber (d) All of the above

Description : Which of the following is not a unit of flux? (a) Maxwell (b) Telsa (c) Weber (d) All of the above

Last Answer : (b) Telsa

Which of the following is the unit of magnetic flux density ? (a) weber (b) lumens (c) tesla (d) none of the above

Description : Which of the following is the unit of magnetic flux density ? (a) weber (b) lumens (c) tesla (d) none of the above

Last Answer : (c) tesla

Gilbert is a unit of (a) electromotive force (6) magnetomotive force (c) conductance (d) permittivity

Description : Gilbert is a unit of (a) electromotive force (6) magnetomotive force (c) conductance (d) permittivity

Last Answer : (6) magnetomotive force

Electric pressure is also called (a) resistance (b) power (c) voltage (d) energy

Description : Electric pressure is also called (a) resistance (b) power (c) voltage (d) energy

Last Answer : (c) voltage

Which of the following is expected to have the maximum permeability ? (a) Brass (b) Copper (c) Zinc (d) Ebonite

Description : Which of the following is expected to have the maximum permeability ? (a) Brass (b) Copper (c) Zinc (d) Ebonite

Last Answer : (d) Ebonite

The magnetism left in the iron after exciting field has been removed is known as (a) permeance (b) residual magnetism (c) susceptance (d) reluctance

Description : The magnetism left in the iron after exciting field has been removed is known as (a) permeance (b) residual magnetism (c) susceptance (d) reluctance

Last Answer : (b) residual magnetism

The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Description : The relative permeability is less than unity is case of (a) ferromagnetic materials (b) ferrites (c) non-ferrous materials (d) diamagnetic materials

Last Answer : (d) diamagnetic materials

Reciprocal of permeability is (a) reluctivity (b) susceptibility (c) permittivity (d) conductance

Description : Reciprocal of permeability is (a) reluctivity (b) susceptibility (c) permittivity (d) conductance

Last Answer : (a) reluctivity

The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft iron shielding is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Description : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields (a) meter is surrounded by strong magnetic fields (b) a soft ... is used (c) a plastic shielding is provided (d) a shielding of anon-magnetic material is used

Last Answer : (b) a soft iron shielding is used

Ferrites are a sub-group of (a) non-magnetic materials (6) ferro-magnetic materials (c) paramagnetic materials (d) ferri-magnetic materials

Description : Ferrites are a sub-group of (a) non-magnetic materials (6) ferro-magnetic materials (c) paramagnetic materials (d) ferri-magnetic materials

Last Answer : (d) ferri-magnetic materials

Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Description : Which of the following is a ferromagnetic material ? (a) Tungsten (b) Aluminium (c) Copper (d) Nickel

Last Answer : (d) Nickel

In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Description : In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Last Answer : (c) magnetic field

Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Description : Two infinitely long parallel conductors in vacuum any separated 1 metre between centers >then a current of 1 ampere flows the. uk each conductor, produce on each other a force of (a) 2 x 1(T2 N/m) (b) 2 x KT3 N/m (c) 2 x 10"5 N/m (d) 2x 1(T7 N/m)

Last Answer : (d) 2x 1(T7 N/m)

The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Description : The substances which have a large number of free electrons and offer a low resistance are called (a) insulators (b) inductors (c) semi-conductors (d) conductors

Last Answer : (d) conductors

Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb

Description : Unit of Power is_____________. A. Watt B. Joule C. Ampere D. Coulomb 

Last Answer : Unit of Power is Watt. 

The basic measuring unit of inductance is the _________. A. coulomb B. ohm C. farad D. henry

Description : The basic measuring unit of inductance is the _________. A. coulomb B. ohm C. farad D. henry

Last Answer : Answer: D

The unit of electrical power is – (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Description : The unit of electrical power is – (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Last Answer : (2) Watt Explanation: Electric power is the rate at which electric energy is transferred by an electric circuit. The SI unit of power is the watt, one joule per second. Watt is named after the Scottish engineer James Watt who invented the Newcomen Steam Engine.

The unit of electrical power is (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Description : The unit of electrical power is (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Last Answer : Bolt

One mole of electrons is known as: w) a Faraday x) a Henry y) a Coulomb z) an Ampere

Description : One mole of electrons is known as: w) a Faraday x) a Henry y) a Coulomb z) an Ampere

Last Answer : ANSWER: W -- A FARADAY

Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Last Answer : b. kW

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Last Answer : ANSWER: D

According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Description : According to the definition of 1 KWh, a 100 watt bulb consumes one unit of electricity in _____. A. 1 Hour B. 5 Hours C. 8 Hours D. 10 Hours

Last Answer : ANSWER: D

Kilo watt – Hour is a unit of –

Description : Kilo watt – Hour is a unit of –

Last Answer : Energy

Electrical energy is measured in a. watt b. horse power c. kilo watt d. kilowatt hour

Description : Electrical energy is measured in a. watt b. horse power c. kilo watt d. kilowatt hour

Last Answer : d. kilowatt hour

The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec

Description : The unit of power in S.I. units is (A) Newton meter (B) Watt (C) Joule (D) Kilogram meter/sec

Last Answer : (B) Watt

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Description : The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Last Answer : (2) coulomb Explanation: The SI unit of quantity of electric charge is the coulomb, which is equivalent to about 6.242x10^18 e (e is the charge of a proton). Hence, the charge of ... of charge that has passed through the cross section of an electrical conductor canying one ampere within one second.

The S.I Unit of Modulus elasticity is: a) Pascal b) Coulomb c) Ampere d) None

Description : The S.I Unit of Modulus elasticity is: a) Pascal b) Coulomb c) Ampere d) None

Last Answer : a) Pascal

The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Description : The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Last Answer : coulomb

How many joules is equal to one watt hour ?

Description : How many joules is equal to one watt hour ?

Last Answer : One watt hour equals 3600 J.

What is equal to 1 watt hour ?

Description : What is equal to 1 watt hour ?

Last Answer : 1 watt hour = 0.001 kilowatt hour

How many hours will a 200 amp hour battery last at 168 watt?

Description : How many hours will a 200 amp hour battery last at 168 watt?

Last Answer : If it is a car battery (as given in the category) it is reasonably safe to assume that under load it is about 12V. I = P/E = 168W / 12V = 14A T = 200AH / 14A = 14.29H However ... battery. This is also assuming that the car battery is not being charged at any time while the load is present.

One kilowatt-hour is the amount of electrical energy that is consumed by 1000 watt appliance in ____. A. 30 minutes B. 45 minutes C. 1 hour D. 1 our and 15 minutes

Description : One kilowatt-hour is the amount of electrical energy that is consumed by 1000 watt appliance in ____. A. 30 minutes B. 45 minutes C. 1 hour D. 1 our and 15 minutes

Last Answer : ANSWER: C

Units of electricity consumed by 2500 watt airconditioner in one hour are: A. 0.25 units B. 1.25 units C. 2.5 units D. 25 units

Description : Units of electricity consumed by 2500 watt airconditioner in one hour are: A. 0.25 units B. 1.25 units C. 2.5 units D. 25 units

Last Answer : ANSWER: D

One kilowatt-hour is the amount of electrical energy that is consumed by 1000 watt appliance in ____. A. 30 minutes B. 45 minutes C. 1 hour 24 D. 1 our and 15 minutes

Description : One kilowatt-hour is the amount of electrical energy that is consumed by 1000 watt appliance in ____. A. 30 minutes B. 45 minutes C. 1 hour 24 D. 1 our and 15 minutes

Last Answer : ANSWER: C

One kilowatt-hour is the amount of electrical energy that is consumed by 1000 watt appliance in ____. A. 30 minutes B. 45 minutes C. 1 hour D. 1 our and 15 minutes

Description : One kilowatt-hour is the amount of electrical energy that is consumed by 1000 watt appliance in ____. A. 30 minutes B. 45 minutes C. 1 hour D. 1 our and 15 minutes

Last Answer : ANSWER: C

Units of electricity consumed by 2500 watt airconditioner in one hour are: A. 0.25 units B. 1.25 units C. 2.5 units D. 25 units

Description : Units of electricity consumed by 2500 watt airconditioner in one hour are: A. 0.25 units B. 1.25 units C. 2.5 units D. 25 units

Last Answer : ANSWER: D

What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Description : What refers to the amount of heat removed from the cooled space in BTS’s for 1 watt-hour of electricity consumed?  A. Cost efficiency rating  B. Energy efficiency rating  C. Coefficient of performance  D. Cost of performance

Last Answer : Energy efficiency rating

What is the quantity shown on the watt-hour meter in figure 1-46?

Description : What is the quantity shown on the watt-hour meter in figure 1-46?

Last Answer : 5.945 megawatt-hours, or 5,945 kilowatt-hours, or 5,945, 000 watt-hours.

What electrical quantity is measured by a watt-hour meter?

Description : What electrical quantity is measured by a watt-hour meter?

Last Answer : Energy.

What type of instrument is the watt-hour meter?

Description : What type of instrument is the watt-hour meter?

Last Answer : an integrating

0.001 Kg mass will be equivalent to a) 2.50 Giga watt hour b) 25.00 giga watt hour c) 0.26 giga watt hour d) None of the above

Description : 0.001 Kg mass will be equivalent to a) 2.50 Giga watt hour b) 25.00 giga watt hour c) 0.26 giga watt hour d) None of the above

Last Answer : b) 25.00 giga watt hour

A 100-watt light bulb is left on for 10 hours. Electricity is 10 cents per kilowatt-hour. How much did it cost to operate the light bulb?

Description : A 100-watt light bulb is left on for 10 hours. Electricity is 10 cents per kilowatt-hour. How much did it cost to operate the light bulb?

Last Answer : ANSWER: 10 CENTS

A homeowner replaces a 65 watt incandescent bulb with a 15 watt compact fluorescent lamp. The light is on 2000 hours a year. If electricity cost 10 cents a kilowatt-hour, how much money is saved on the electric bill in one year? w) $50.00 x) $10.00 y) $5.00 z) $1.00

Description : A homeowner replaces a 65 watt incandescent bulb with a 15 watt compact fluorescent lamp. The light is on 2000 hours a year. If electricity cost 10 cents a kilowatt-hour, how much money is saved on the electric bill in one year? w) $50.00 x) $10.00 y) $5.00 z) $1.00 

Last Answer : ANSWER: X -- $10.00 

Induction watt-hour meters are free from

Description : Induction watt-hour meters are free from (a) phase (b) creeping (c) temperature (d) frequency

Last Answer : b

The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh....

Description : The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be

Last Answer : The meter constant of a single-phase 230 V induction watt hour meter is 400 revolutions per kWh. The speed of the meter disc for a current of 10 A of 0.9 pf lagging will be 13.80 rpm

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

The unit of force in S.I. units is (A) Kilogram (B) Newton (C) Watt (D) Dyne

Description : The unit of force in S.I. units is (A) Kilogram (B) Newton (C) Watt (D) Dyne

Last Answer : (B) Newton

5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m

Description : 5. Unit of surface tension in S.I. unit is (A) Watt/m (B) Joule/m2 (C) Newton/m2 (D) Joule/m

Last Answer : Option B

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b