The conditions for the production of constructive and destructive interference are reversed due to the fact that on striking the thin film -------. A. Two rays of splitted light undergo phase change of 180° B. One of two rays of splitted light undergo phase change of 180° C. Light is diffracted, light is polarized

The conditions for the production of constructive and destructive  interference are reversed due to the fact that on striking the thin film -------. A. Two rays of splitted light undergo phase change of 180° B. One of two rays of splitted light undergo phase change of 180° C. Light is diffracted, light is polarized
by

1 Answer

Answer :

A. Two rays of splitted light undergo phase change of 180°
by

Related questions

The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Description : The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Last Answer : (d) All of above

Why in Newton’s rings the center spot is always dark? A. The thickness of the film is zero at center B. The path difference between incident ray and reflected ray is ½wavelength C. The incident ray and reflected ray undergo destructive interference D. All of above

Description : Why in Newton’s rings the center spot is always dark? A. The thickness of the film is zero at center B. The path difference between incident ray and reflected ray is ½wavelength C. The incident ray and reflected ray undergo destructive interference D. All of above

Last Answer : D. All of above

In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Description : In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Last Answer : B. Phase coherence

In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of film (b) Change in optical path difference at different points of film (c) Thickness of film is different at different points of film (d) All of above

Description : In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of ... of film (c) Thickness of film is different at different points of film (d) All of above

Last Answer : (d) All of above

To observe interference in thin films with a light of wavelength λ, the thickness of the film (a) Should be much smaller than λ (b) Should be a few thousand times of λ (c) Should be of the order of λ (d) Should be of the order of nanometer

Description : To observe interference in thin films with a light of wavelength λ, the thickness of the film (a) Should be much smaller than λ (b) Should be a few thousand times of λ (c) Should be of the order of λ (d) Should be of the order of nanometer

Last Answer : (c) Should be of the order of λ

The points of constructive interference of light are__________. A. Always bright B. may be bright or dark C. always dark D. neither bright nor dark

Description : The points of constructive interference of light are__________. A. Always bright B. may be bright or dark C. always dark D. neither bright nor dark

Last Answer : A. Always bright

The condition for minima in Fraunhofer diffraction for single slit is asinθ = mλWhat is ‘θ’? A. Angle of incidence of incident rays at the slit B. Angle at which diffracted rays strikes the screen C. Angle between slit and screen D. Angle of diffraction at which rays are diffracted at slit

Description : The condition for minima in Fraunhofer diffraction for single slit is asinθ = mλWhat is ‘θ’? A. Angle of incidence of incident rays at the slit B. Angle at which diffracted rays strikes the screen C. Angle between slit and screen D. Angle of diffraction at which rays are diffracted at slit

Last Answer : D. Angle of diffraction at which rays are diffracted at slit

In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused by slit at a single point on screen B. All the diffracted rays are perpendicular and focused by slit at a single point on screen C. The rays are diffracted by the slit in all the directions D. The rays are reflected by the slit

Description : In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused ... are diffracted by the slit in all the directions D. The rays are reflected by the slit

Last Answer : A. All the diffracted rays are parallel and focused by slit at a single point on screen

Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the thin film is replaced by the film of higher refractive index. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will merge (d) There will not any effect

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the thin film is replaced by the film of higher refractive index. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will merge (d) There will not any effect

Last Answer : (b) Bandwidth decreases

What is the nature of interference pattern for thin film of wedge shaped (a) Concave outside (b) Convex outside (b) Equally spaced (d) Concave inside

Description : What is the nature of interference pattern for thin film of wedge shaped (a) Concave outside (b) Convex outside (b) Equally spaced (d) Concave inside

Last Answer : (b) Convex outside

In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform ... c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

Interference in thin film is mainly because of (a) Division amplitude (b) Division of wave fronts (c) Addition of amplitude (d) Addition of wave fronts

Description : Interference in thin film is mainly because of (a) Division amplitude (b) Division of wave fronts (c) Addition of amplitude (d) Addition of wave fronts

Last Answer : (a) Division amplitude

What is the nature of interference pattern for thin film of wedge shaped A. Concave outside B. Convex outside C. Equally spaced D. Concave inside

Description : What is the nature of interference pattern for thin film of wedge shaped A. Concave outside B. Convex outside C. Equally spaced D. Concave inside

Last Answer : B. Convex outside

Interference in thin film is mainly because of A. Division amplitude B. Division of wave fronts C. Addition of amplitude D. Addition of wave fronts

Description : Interference in thin film is mainly because of A. Division amplitude B. Division of wave fronts C. Addition of amplitude D. Addition of wave fronts

Last Answer : A. Division amplitude

On a rainy day, small oil films on water show brilliant colors'. This is due to A. dispersion B. interference C. diffraction D. Polarization 49.The critical angle for a beam of light passing from water into air is 48.8 °. This means that all light rays with an angle of incidence greater than this angle will be A. absorbed B. totally reflected C. Partially reflected and partially transmitted D. Totally transmitted

Description : On a rainy day, small oil films on water show brilliant colors'. This is due to A. dispersion B. interference C. diffraction D. Polarization 49.The critical angle for a beam of light ... A. absorbed B. totally reflected C. Partially reflected and partially transmitted D. Totally transmitted

Last Answer : C. Partially reflected and partially transmitted

Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Description : Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Last Answer : (d) It will be a mixture of all colors

What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Description : What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Last Answer : (b) Always dark

Colors in thin films are because of A. Dispersion C. Interference B. Compton effect D. Diffraction

Description : Colors in thin films are because of A. Dispersion C. Interference B. Compton effect D. Diffraction

Last Answer : C. Interference

Light is normally incident on a thin soap film and is reflected. If the wavelength of this light is "L" and the index of refraction of the soap film is "N", complete destructive interference will occur for a film thickness of: w) L / 8N x) L / 4N y) L / 2N z) 3L / 4N

Description : Light is normally incident on a thin soap film and is reflected. If the wavelength of this light is "L" and the index of refraction of the soap film is "N", complete destructive interference will occur for a film thickness of: w) L / 8N x) L / 4N y) L / 2N z) 3L / 4N

Last Answer : ANSWER: Y -- L / 2N 

When electromagnetic waves strike the boundary of denser medium they are __________. A. Reflected, in phase B. Reflected out of phase by 180° C. reflected, they are completely absorbed

Description : When electromagnetic waves strike the boundary of denser medium they are __________. A. Reflected, in phase B. Reflected out of phase by 180° C. reflected, they are completely absorbed

Last Answer : B. Reflected out of phase by 180°

A thin film is observed in white light. The color of the film seen at a particular point depends upon (a)Location of observer (b)Width of the source (c) Distance of the source (d) Brightness of the source

Description : A thin film is observed in white light. The color of the film seen at a particular point depends upon (a)Location of observer (b)Width of the source (c) Distance of the source (d) Brightness of the source

Last Answer : (a)Location of observer

If you look perpendicular at thin film and move yourself away from the film (staying perpendicular to the film), you will notice (a) Reflected light becomes brighter and brighter (b) Reflected light becomes darker and darker (c) Reflected light alternates between darker and brighter (d) None of the Above

Description : If you look perpendicular at thin film and move yourself away from the film (staying perpendicular to the film), you will notice (a) Reflected light becomes brighter and brighter (b) Reflected ... and darker (c) Reflected light alternates between darker and brighter (d) None of the Above

Last Answer : (c) Reflected light alternates between darker and brighter

A film is said to be thin if its thickness is (a) Much smaller than wavelength of light (b) Comparable with one wavelength of light (c) Of the order of nanometer (10-9 m) (d) Of the order of Pico meter (10-12 m)

Description : A film is said to be thin if its thickness is (a) Much smaller than wavelength of light (b) Comparable with one wavelength of light (c) Of the order of nanometer (10-9 m) (d) Of the order of Pico meter (10-12 m)

Last Answer : (b) Comparable with one wavelength of light

__________ of the following phenomenon cannot be explained on the particle nature of light. A. Photo Electric Effect B. Compton’s Effect C. Pair Production D. Interference

Description : __________ of the following phenomenon cannot be explained on the particle nature of light. A. Photo Electric Effect B. Compton’s Effect C. Pair Production D. Interference

Last Answer : A. Photo Electric Effect

Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced to zero. What will be the effect on Bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced to zero. What will be the effect on Bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Last Answer : (c) Bands will disappear

Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Last Answer : B) BANDWIDTH DECREASES

In wedge shaped film the interference pattern has nature (a) Parallel to the end where thickness is non-zero (b) Perpendicular to contact edge (c) Parallel to contact edge (d) Perpendicular to the end where thickness is non-zero

Description : In wedge shaped film the interference pattern has nature (a) Parallel to the end where thickness is non-zero (b) Perpendicular to contact edge (c) Parallel to contact edge (d) Perpendicular to the end where thickness is non-zero

Last Answer : (c) Parallel to contact edge

Newton’s rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex lens and upper surface of plane glass plate (c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate

Description : Newton's rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex ... c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate

Last Answer : (b) Lower surface of Plano-convex lens and upper surface of plane glass plate

Newton’s light illustrate the phenomenon of (a) Interference (b) Diffraction (c) Dispersion (d) Polarisation

Description : Newton’s light illustrate the phenomenon of (a) Interference (b) Diffraction (c) Dispersion (d) Polarisation

Last Answer : (a) Interference

In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

When Newton’s rings interference pattern is viewed from above by means of reflected light, the central spot is __________. A. Dark B. Multi colored C. Bright D. None of these

Description : When Newton’s rings interference pattern is viewed from above by means of reflected light, the central spot is __________. A. Dark B. Multi colored C. Bright D. None of these

Last Answer : A. Dark

Which of the following does not support the wave nature of light A. Interference C. Polarisation B. Compton effect D. Diffraction

Description : Which of the following does not support the wave nature of light A. Interference C. Polarisation B. Compton effect D. Diffraction

Last Answer : B. Compton effec

Interference of light is evidence that : A. The speed of light is very large B. light is a transverse wave C. light is electromagnetic in character D. Light is a wave phenomenon

Description : Interference of light is evidence that : A. The speed of light is very large B. light is a transverse wave C. light is electromagnetic in character D. Light is a wave phenomenon

Last Answer : D. Light is a wave phenomenon

Why in Newton’s rings setup, the beam splitter (mirror) is kept at 450? (a) It allows light rays to incident at 450over the top surface of Plano convex lens (b) It allows light rays to incident uniformly over the top surface of Plano convex lens (c) It allows light rays to incident parallel over the top surface of Plano convex lens (d) It allows light rays to incident at 900over the top surface of Plano convex lens

Description : Why in Newton's rings setup, the beam splitter (mirror) is kept at 450? (a) It allows light rays to incident at 450over the top surface of Plano convex lens (b) It allows light rays to ... Plano convex lens (d) It allows light rays to incident at 900over the top surface of Plano convex lens

Last Answer : (d) It allows light rays to incident at 900over the top surface of Plano convex lens

When a light wave suffers reflection at the interface between air and glass medium, the change of phase of the reflected wave in air is equal to (a) 0 (b) π (c) 2π (d) π/2

Description : When a light wave suffers reflection at the interface between air and glass medium, the change of phase of the reflected wave in air is equal to (a) 0 (b) π (c) 2π (d) π/2

Last Answer : (b) π

When a light wave suffers reflection at the interface between air and glass medium, the change of phase of the reflected wave in air is equal to A. 0 B. π C.2 π D.π /2

Description : When a light wave suffers reflection at the interface between air and glass medium, the change of phase of the reflected wave in air is equal to A. 0 B. π C.2 π D.π /2

Last Answer : B. π

Which of the following phenomenon produces colors in soap bubble? (a) Interference (b) Diffraction (c) Polarization (d) Dispersion

Description : Which of the following phenomenon produces colors in soap bubble? (a) Interference (b) Diffraction (c) Polarization (d) Dispersion

Last Answer : (a) Interference

Diffraction is special type of __________. A. Reflection B. Refraction C. Interference D. Polarization

Description : Diffraction is special type of __________. A. Reflection B. Refraction C. Interference D. Polarization

Last Answer : B. Refraction

Optical fiber works on the A. principle of refraction B. total internal reflection C. scattering D. interference

Description : Optical fiber works on the A. principle of refraction B. total internal reflection C. scattering D. interference

Last Answer : B. total internal reflection

hat is the name of the process whereby waves travel around corners and obstacles in their paths? A. Reflection B. Refraction C Interference D. Diffraction

Description : hat is the name of the process whereby waves travel around corners and obstacles in their paths? A. Reflection B. Refraction C Interference D. Diffraction

Last Answer : D. Diffraction

In reference with antireflection coating which of the following statement is true? A. Thickness of the film should be changed for light of same wavelength but different intensity B. Thickness of the film need not be changed for light of same wavelength but different intensity C. Thickness of the film should be increased for light of same wavelength but higher intensity D. Thickness of the film should be decreased for light of same wavelength but higher intensity

Description : In reference with antireflection coating which of the following statement is true? A. Thickness of the film should be changed for light of same wavelength but different intensity B. Thickness of ... D. Thickness of the film should be decreased for light of same wavelength but higher intensity

Last Answer : B. Thickness of the film need not be changed for light of same wavelength but different intensity

A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Description : A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Last Answer : b) Zero thickness at one end and it increasing towards other end

A wedge shaped thin has A. Non-uniform thickness B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends D. Thickness increase and decrease alternately

Description : A wedge shaped thin has A. Non-uniform thickness B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends D. Thickness increase and decrease alternately

Last Answer : B. Zero thickness at one end and it increasing towards other end

The phenomenon of Newton’s rings can be used to check the __________. A. Wavelength of monochromatic light B. phase coherence of two sources C. flatness of any glass surface D. velocity of light

Description : The phenomenon of Newton’s rings can be used to check the __________. A. Wavelength of monochromatic light B. phase coherence of two sources C. flatness of any glass surface D. velocity of light

Last Answer : A. Wavelength of monochromatic light

Which of the following does NOT travel in a vacuum? A. Radio waves B. Gamma rays C. Magnetic waves D. Sound waves

Description : Which of the following does NOT travel in a vacuum? A. Radio waves B. Gamma rays C. Magnetic waves D. Sound waves

Last Answer : D. Sound waves

Which of the following waves are diffracted by an obstacle of size 1 cm? (a) Light waves (b) Sound waves (c) Ultrasonic waves (d) X-rays

Description : Which of the following waves are diffracted by an obstacle of size 1 cm? (a) Light waves (b) Sound waves (c) Ultrasonic waves (d) X-rays

Last Answer : Ans:(c)

Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to width the pinhole B. A bright point of the width equal to width the pinhole but of less intensity C. A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Description : Diffraction due to circular aperture If a light passes through a small pinhole, and incident on a screen. What will be observed on the screen? A.A sharp bright point of the width equal to ... A bright ring at the centre surrounded by alternate dark and bright rings D. A diffused bright point

Last Answer : C. A bright ring at the centre surrounded by alternate dark and bright rings

The consequences of social change may be constructive or destructive.

Description : The consequences of social change may be constructive or destructive.

Last Answer : Give your personal response : The consequences of social change may be constructive or destructive.