A wedge shaped thin has A. Non-uniform thickness B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends D. Thickness increase and decrease alternately

A wedge shaped thin has
A. Non-uniform thickness
B. Zero thickness at one end and it increasing towards other end C. Zero thickness at both ends
D. Thickness increase and decrease alternately
by

1 Answer

Answer :

B. Zero thickness at one end and it increasing towards other end
by

Related questions

A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Description : A wedge shaped thin has (a) Non-uniform thickness (b) Zero thickness at one end and it increasing towards other end (c) Zero thickness at both ends (d) Thickness increase and decrease alternately

Last Answer : b) Zero thickness at one end and it increasing towards other end

In wedge shaped film the interference pattern has nature (a) Parallel to the end where thickness is non-zero (b) Perpendicular to contact edge (c) Parallel to contact edge (d) Perpendicular to the end where thickness is non-zero

Description : In wedge shaped film the interference pattern has nature (a) Parallel to the end where thickness is non-zero (b) Perpendicular to contact edge (c) Parallel to contact edge (d) Perpendicular to the end where thickness is non-zero

Last Answer : (c) Parallel to contact edge

What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Description : What is the nature of interference pattern at the contact edge of wedge shaped film (a) Always bright (b) Always dark (c) Bright or dark depending upon the thickness of other end (d) Bright or dark depending upon the wavelength of the light

Last Answer : (b) Always dark

Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the thin film is replaced by the film of higher refractive index. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will merge (d) There will not any effect

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the thin film is replaced by the film of higher refractive index. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will merge (d) There will not any effect

Last Answer : (b) Bandwidth decreases

What is the nature of interference pattern for thin film of wedge shaped (a) Concave outside (b) Convex outside (b) Equally spaced (d) Concave inside

Description : What is the nature of interference pattern for thin film of wedge shaped (a) Concave outside (b) Convex outside (b) Equally spaced (d) Concave inside

Last Answer : (b) Convex outside

What is the nature of interference pattern for thin film of wedge shaped A. Concave outside B. Convex outside C. Equally spaced D. Concave inside

Description : What is the nature of interference pattern for thin film of wedge shaped A. Concave outside B. Convex outside C. Equally spaced D. Concave inside

Last Answer : B. Convex outside

In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of film (b) Change in optical path difference at different points of film (c) Thickness of film is different at different points of film (d) All of above

Description : In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of ... of film (c) Thickness of film is different at different points of film (d) All of above

Last Answer : (d) All of above

Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced to zero. What will be the effect on Bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced to zero. What will be the effect on Bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Last Answer : (c) Bands will disappear

Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Description : Interference pattern is observed in wedge-shaped film for monochromatic light. Now monochromatic light is replaced by white light. What will be the effect on interference pattern? (a) It will turn to dark (b) It will turn to bright (c) Bands will disappear (d) It will be a mixture of all colors

Last Answer : (d) It will be a mixture of all colors

Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Description : Interference pattern is observed in wedge-shaped film and bandwidth is noted. Now the angle of wedge is reduced. What will be the effect on bandwidth? (a) Bandwidth increases (b) Bandwidth decreases (c) Bands will disappear (d) There will not any effect

Last Answer : B) BANDWIDTH DECREASES

In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform ... c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

To observe interference in thin films with a light of wavelength λ, the thickness of the film (a) Should be much smaller than λ (b) Should be a few thousand times of λ (c) Should be of the order of λ (d) Should be of the order of nanometer

Description : To observe interference in thin films with a light of wavelength λ, the thickness of the film (a) Should be much smaller than λ (b) Should be a few thousand times of λ (c) Should be of the order of λ (d) Should be of the order of nanometer

Last Answer : (c) Should be of the order of λ

A film is said to be thin if its thickness is (a) Much smaller than wavelength of light (b) Comparable with one wavelength of light (c) Of the order of nanometer (10-9 m) (d) Of the order of Pico meter (10-12 m)

Description : A film is said to be thin if its thickness is (a) Much smaller than wavelength of light (b) Comparable with one wavelength of light (c) Of the order of nanometer (10-9 m) (d) Of the order of Pico meter (10-12 m)

Last Answer : (b) Comparable with one wavelength of light

What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity of central maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Description : What is the effect of increasing the number of slits on the intensity of Central maxima of diffraction pattern of a diffraction grating? A. Intensity of central maxima will decrease B. Intensity ... maxima will increase C. There will not be any effect D. Diffraction pattern will disappear

Last Answer : B. Intensity of central maxima will increase

How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of secondary maxima remains constant on either side C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Description : How the intensity of secondary maxima varies in case of Fraunhofer diffraction pattern for single slit? A. Intensity of secondary maxima decreases on either sides B. Intensity of ... C. Intensity increases and decreases alternately D. Intensity of secondary maxima increases on either sides

Last Answer : A. Intensity of secondary maxima decreases on either sides

Why in Newton’s rings the center spot is always dark? A. The thickness of the film is zero at center B. The path difference between incident ray and reflected ray is ½wavelength C. The incident ray and reflected ray undergo destructive interference D. All of above

Description : Why in Newton’s rings the center spot is always dark? A. The thickness of the film is zero at center B. The path difference between incident ray and reflected ray is ½wavelength C. The incident ray and reflected ray undergo destructive interference D. All of above

Last Answer : D. All of above

The fringe width and the angle of wedge are related to A. β=λ/2θ B. θ =λ/2 β C. β=λ/θ D. λ= β/2θ

Description : The fringe width and the angle of wedge are related to A. β=λ/2θ B. θ =λ/2 β C. β=λ/θ D. λ= β/2θ

Last Answer : A. β=λ/2θ

In Fraunhofer diffraction wave front used is __________. A. Spherical B. Circular C. Plane D. Conical 71.In diffraction pattern of monochromatic light the bright bands formed are __________. A. of uniform intensity B. of non-uniform intensity C. of uniform width D. is of different colors

Description : In Fraunhofer diffraction wave front used is __________. A. Spherical B. Circular C. Plane D. Conical 71.In diffraction pattern of monochromatic light the bright bands formed are __________. A. of uniform intensity B. of non-uniform intensity C. of uniform width D. is of different colors

Last Answer : A. of uniform intensity

In reflected light the central fringes of Newton's ring is A. dark B. Bright C. Uniform D. Non uniform

Description : In reflected light the central fringes of Newton's ring is A. dark B. Bright C. Uniform D. Non uniform

Last Answer : A. dark

Newton’s rings experiment is performed and radius (or diameter) is calculated. Now Plano-convex lens is replaced with another Plano-convex lens of greater Radius of curvature. What will be effect on radius (or diameter)? (a) Radius (or diameter) will remain constant but there will be more brightness (b) Radius (or diameter) will increase (c) Radius (or diameter) will decrease (d) There will be no effect

Description : Newton's rings experiment is performed and radius (or diameter) is calculated. Now Plano-convex lens is replaced with another Plano-convex lens of greater Radius of curvature. What will be effect on radius ( ... ) will increase (c) Radius (or diameter) will decrease (d) There will be no effect

Last Answer : (b) Radius (or diameter) will increase

Newton’s rings experiment is performed with air gap between lens and plate. Now that gap is filled with water. What will be effect on radius (or diameter)? (a) Radius (or diameter) will remain constant but there will be more brightness (b) Radius (or diameter) will increase (c) Radius (or diameter) will decrease (d) There will be no effect

Description : Newton's rings experiment is performed with air gap between lens and plate. Now that gap is filled with water. What will be effect on radius (or diameter)? (a) Radius (or diameter) will remain ... or diameter) will increase (c) Radius (or diameter) will decrease (d) There will be no effect

Last Answer : (c) Radius (or diameter) will decrease

In Newton’s rings experiment, if monochromatic source of light is replaced by another monochromatic source of higher wavelength. What will be the effect on radius (or diameter)? (a) Radius (or diameter) will decrease (b) Radius (or diameter) will increase (c) There will be no effect (d) Radius (or diameter) will remain constant but there will be more brightness

Description : In Newton's rings experiment, if monochromatic source of light is replaced by another monochromatic source of higher wavelength. What will be the effect on radius (or diameter)? (a) Radius (or ... be no effect (d) Radius (or diameter) will remain constant but there will be more brightness

Last Answer : (b) Radius (or diameter) will increase

In reference with antireflection coating which of the following statement is true? A. Thickness of the film should be changed for light of same wavelength but different intensity B. Thickness of the film need not be changed for light of same wavelength but different intensity C. Thickness of the film should be increased for light of same wavelength but higher intensity D. Thickness of the film should be decreased for light of same wavelength but higher intensity

Description : In reference with antireflection coating which of the following statement is true? A. Thickness of the film should be changed for light of same wavelength but different intensity B. Thickness of ... D. Thickness of the film should be decreased for light of same wavelength but higher intensity

Last Answer : B. Thickness of the film need not be changed for light of same wavelength but different intensity

A thin film is observed in white light. The color of the film seen at a particular point depends upon (a)Location of observer (b)Width of the source (c) Distance of the source (d) Brightness of the source

Description : A thin film is observed in white light. The color of the film seen at a particular point depends upon (a)Location of observer (b)Width of the source (c) Distance of the source (d) Brightness of the source

Last Answer : (a)Location of observer

If you look perpendicular at thin film and move yourself away from the film (staying perpendicular to the film), you will notice (a) Reflected light becomes brighter and brighter (b) Reflected light becomes darker and darker (c) Reflected light alternates between darker and brighter (d) None of the Above

Description : If you look perpendicular at thin film and move yourself away from the film (staying perpendicular to the film), you will notice (a) Reflected light becomes brighter and brighter (b) Reflected ... and darker (c) Reflected light alternates between darker and brighter (d) None of the Above

Last Answer : (c) Reflected light alternates between darker and brighter

The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Description : The interference in thin films is because (a) The film reflects some light (b) The film is thin enough so that refracted ray is close to reflected ray (c) The reflected ray undergo path change of λ/2 (d) All of above

Last Answer : (d) All of above

Interference in thin film is mainly because of (a) Division amplitude (b) Division of wave fronts (c) Addition of amplitude (d) Addition of wave fronts

Description : Interference in thin film is mainly because of (a) Division amplitude (b) Division of wave fronts (c) Addition of amplitude (d) Addition of wave fronts

Last Answer : (a) Division amplitude

Interference in thin film is mainly because of A. Division amplitude B. Division of wave fronts C. Addition of amplitude D. Addition of wave fronts

Description : Interference in thin film is mainly because of A. Division amplitude B. Division of wave fronts C. Addition of amplitude D. Addition of wave fronts

Last Answer : A. Division amplitude

In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Description : In Michelson interferometer semi silvered mirror is used To obtain __________. A. Thin film interference B. Phase coherence C. mono chromatic light D. colored fringe

Last Answer : B. Phase coherence

The conditions for the production of constructive and destructive interference are reversed due to the fact that on striking the thin film -------. A. Two rays of splitted light undergo phase change of 180° B. One of two rays of splitted light undergo phase change of 180° C. Light is diffracted, light is polarized

Description : The conditions for the production of constructive and destructive interference are reversed due to the fact that on striking the thin film -------. A. Two rays of splitted light undergo phase ... two rays of splitted light undergo phase change of 180° C. Light is diffracted, light is polarized

Last Answer : A. Two rays of splitted light undergo phase change of 180°

Colors in thin films are because of A. Dispersion C. Interference B. Compton effect D. Diffraction

Description : Colors in thin films are because of A. Dispersion C. Interference B. Compton effect D. Diffraction

Last Answer : C. Interference

In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

To ensure uniform pressure distribution, the thickness of the foundation, isA) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge

Description : To ensure uniform pressure distribution, the thickness of the foundation, is A) Kept uniform throughout (B) Increased gradually towards the edge (C) Decreased gradually towards the edge (D) Kept zero at the edge

Last Answer : Answer: Option C

In Newton’s rings experiment, if we reduce the radius of curvature of Plano Convex lens to zero, what will be effect on Newton’s rings? (a)They will become more bright (b)They will become more dark ( c)They will disappear (d) They will be more dense

Description : In Newton’s rings experiment, if we reduce the radius of curvature of Plano Convex lens to zero, what will be effect on Newton’s rings? (a)They will become more bright (b)They will become more dark ( c)They will disappear (d) They will be more dense

Last Answer : ( c)They will disappear

In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused by slit at a single point on screen B. All the diffracted rays are perpendicular and focused by slit at a single point on screen C. The rays are diffracted by the slit in all the directions D. The rays are reflected by the slit

Description : In Fraunhofer diffraction pattern for single slit, a central maximum is obtained when angle of diffraction q is equal to zero. What it actually indicates? A. All the diffracted rays are parallel and focused ... are diffracted by the slit in all the directions D. The rays are reflected by the slit

Last Answer : A. All the diffracted rays are parallel and focused by slit at a single point on screen

In Newton’s rings experiment, if we reduce the radius of curvature of Plano convex lens to zero, what will be effect on Newton’s rings? A. They will become brighter B. They will become darker C. They will disappear D. They will be more dense

Description : In Newton’s rings experiment, if we reduce the radius of curvature of Plano convex lens to zero, what will be effect on Newton’s rings? A. They will become brighter B. They will become darker C. They will disappear D. They will be more dense

Last Answer : C. They will disappear

.If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Description : .If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Last Answer : B. Decreases

Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent minima on the screen to increase? A. A. increase the index of refraction of the medium in which the setup is immersed B. increase the separation d between the slits C. increase the distance D. increase the frequency of the incident light

Description : Coherent light of a single frequency passes through a double slit with a separation d, to produce a pattern on a screen as distance D from the slits. What would cause the separation between adjacent ... d between the slits C. increase the distance D. increase the frequency of the incident light

Last Answer : B. increase the separation d between the slits

The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Description : The pole faces of U-shaped magnet in a moving coil galvanometer are made concave to a) decrease the strength of magnetic field b) create a non-uniform magnetic field c) make the magnetic field radial d) All of these

Last Answer : c) make the magnetic field radial

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

A vessel is said to be thin if a. Its wall has less thickness b. Stresses are uniform over the entire thickness c. Stresses vary at inner and at outer radius d. None of the above

Description : A vessel is said to be thin if a. Its wall has less thickness b. Stresses are uniform over the entire thickness c. Stresses vary at inner and at outer radius d. None of the above

Last Answer : b. Stresses are uniform over the entire thickness

Which of the following is the name given to resistance of thin films that are uniform in thickness?

Description : Which of the following is the name given to resistance of thin films that are uniform in thickness? A) Area resistance B) Sheet resistance C) Filmy resistance D) None of these

Last Answer : Which of the following is the name given to resistance of thin films that are uniform in thickness? A) Area resistance B) Sheet resistance C) Filmy resistance D) None of these

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... . Which of the following is correct for neighbors? a) X, W b) R, X c) S, W d) P, S

Last Answer : Ans: option (d)

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Who is the only female in between X & R? a) Z b) P c) Y d) Q

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and ... R & Y are neighbors. Who is the only female in between X & R? a) Z b) P c) Y d) Q

Last Answer : Ans: option (c)

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. Who are all females in the given arrangement? a) S, Q, R, W b) P, Q, Y, W c) P, Q, R, W d) P, Q, R, S

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. ... a) S, Q, R, W b) P, Q, Y, W c) P, Q, R, W d) P, Q, R, S

Last Answer : b) P, Q, Y, W

Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X and exactly opposite to Q. II. P is 2nd to the left of W. III. S and R are facing each other as well R & Y are neighbors. 10. Who is exactly opposite to X? a) Z b) P c) S d) W

Description : Eight persons P, Q, R, S, W, X, Y and Z in which 4 females are facing towards and 4 males facing away from the center. Males and females are seated alternately. I. X is male, W position is 3rd to the right of X ... as well R & Y are neighbors. 10. Who is exactly opposite to X? a) Z b) P c) S d) W

Last Answer : Ans: option (a)

Which of the following condition is essential for observing Fraunhofer diffraction? A. Source must be close to slit and screen should be at infinite distance B. Both source and screen must be close to slit C. Source must be at infinity and screen should be close to the slit D. Both source and screen must be at infinity

Description : Which of the following condition is essential for observing Fraunhofer diffraction? A. Source must be close to slit and screen should be at infinite distance B. Both source and screen must be close to ... infinity and screen should be close to the slit D. Both source and screen must be at infinity

Last Answer : D. Both source and screen must be at infinity

Fresnel’s type diffraction is observed when __________. A. Only screen is placed at finite distance B. Only source is placed at finite distance C. Both source and screen are at finite distance D. Neither source nor screen is at finite distance

Description : Fresnel’s type diffraction is observed when __________. A. Only screen is placed at finite distance B. Only source is placed at finite distance C. Both source and screen are at finite distance D. Neither source nor screen is at finite distance

Last Answer : C. Both source and screen are at finite distance