Three resistors of resistance R are connected in various ways, which of the following cannot be
obtained?
a. 3R ohm b. 2R/4 ohm c. R/3 ohm d. 2R/3 ohm

1 Answer

Answer :

b. 2R/4 ohm

Related questions

Description : N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Last Answer : 25 ohms

Description : The centre of percussion of a solid cylinder of radius r resting on a horizontal plane will be  (A) r/2  (B) 2r/3  (C) r/A (D) 3r/2 

Last Answer : (D) 3r/2 

Description : If L is the length of a moving vehicle and R is the radius of curve, the extra mechanical width b to be provided on horizontal curves, (A) L/R (B) L/2R (C) L²/2R (D) L/3R

Last Answer : Answer: Option C

Description : Three resistors each of 2 ohm are connected together in a triangular shape. The resistance between any two vertices will be

Last Answer : Three resistors each of 2 ohm are connected together in a triangular shape. The resistance between any two ... 3//4Omega` C. `3Omega` D. `6Omega`

Description : What is the total resistance of three 15-ohm resistors connected in parallel?

Last Answer : ANSWER: 5 OHMS

Description : Three equal resistors connected in series with a source of e m f together dissipate 10 W of power each. What will be the power dissipated if the same resistors are connected in parallel across the same source of e m f? a. 40 W b. 90W c. 100W d. 120W

Last Answer : b. 90W

Description : The total energy of electron in the Bohr orbit is given by the formula, E = a) - ke2 /2r b) - ke2 /2r2 c) - k 2 e/2r d) - ke2 /r

Last Answer : a) - ke2 /2r

Description : A proton moves in a uniform magnetic field in a circular path of radius R. If the energy of proton is doubled then the new radius becomes a) R √2 b) 2R c) R 2 d) √2 R

Last Answer : d) √2 R

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

Last Answer : Two 1 kilo-ohm 1/2 W resistors are connected in series. Their combined resistance value and wattage will be 2 kΩ, 1 W.

Last Answer : 4 different combinations may be obtained with three resistors, each having the resistance R.

Description : If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Last Answer : c) A few ohm

Description : Resistance between points A and B in the circuit shown in figure is a. 4 ohm b. 6ohm c. 10 ohm d. 8 ohm

Last Answer : c. 10 ohm

Description : A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Last Answer : 50 volts.

Last Answer : If four 90 ohm resistors are connected in series across an 18 V source, the current equals 50 mA.

Description : Electrical energy is converted to heat at the rate of a. IRt b. I 2R c. I 2Rt d. VIt

Last Answer : b. I 2R

Description : Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the internal resistance of battery A is 1.9

Last Answer : Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the ... V B. `3.8` V C. zero D. `4.8` V

Description : A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be:

Last Answer : A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be: 2.4 kOhm

Description : What is colour code of resistors , Please explain ?

Last Answer : Colours to denote value. In four band colour coding, the first band indicates the first digit, the second band : the second digit and the third band : the number of zeroes.

Description : If `V_(A)-V_(B)=V_(0)` and the value of each resistance is R, then I. net resistance between AB is `(R)/(2)` II. Net resistance between AB is `(3R)/(5

Last Answer : If `V_(A)-V_(B)=V_(0)` and the value of each resistance is R, then I. net resistance between AB is `(R ... II B. I and III C. Only I D. All of these

Description : The results obtained by the Balmer were formulated, in 1896, by a) Theodore Lyman b) F. S. Brackett c) J.R.Rydberg d) J.J.Balmer

Last Answer : c) J.R.Rydberg

Description : The unit of inductance is: a. Volt b. Ampere c. Henry d. Ohm

Last Answer : c. Henry

Description : Electric current produces magnetic field was suggested by: a. Faraday b. Lenz c. Ohm d. Oerested

Last Answer : c. Ohm

Description : SI unit of resistivity is a. ohm b. Ohm×m c. Ohm×m-1 d. Ohm×m2

Last Answer : c. Ohm×m-1

Description : A galvanometer of 65 Ω resistance gives full scale deflection with 4 mA current. In order to convert it into ammeter, the range of 10 A is connected with it, the shunt resistance should be a) 0.1 Ω b) 0.2 Ω c) 0.06 Ω d) 0.03 Ω

Last Answer : d) 0.03 Ω

Description : A neon flashlight cell with an emf of 1.5V gives a current of 15A when connected directly to an ammeter of resistance 0.04?. Internal resistance of the cell is a. 0.0004? b. 0.06? c. 0.10? d. 0.13?

Last Answer : b. 0.06?

Description : When 2,4 and 6 ohms resistor are connected in parallel their resultant equivalent resistance will be A. 12ohm b. 11/12ohm C. 12/11ohm d. None

Last Answer : C. 12/11ohm

Description : Three resistors connected in parallel have values of 12 kΩ, 20kΩ, and 30kΩ. What is the equivalent resistance? A37. 6kΩ Q38. Two resistors connected in parallel have values of 10 kΩ and 30kΩ. What is eht equivalent resistance?

Last Answer : 7.5kΩ

Description : If a wire of resistance R is melted and recast to half of its length, then the new resistance of the wire will be - (1) R/4 (2) R/2 (3) R (4) 2R

Last Answer : (1) R/4

Description : Heat produced when a steady state current, I passes through an electrical conductor having resistance, 'R' is (A) IR (B) I 2R (C) IR 2 (D) I 2R

Last Answer : (B) I 2R

Description : In an R-2R ladder D/A converter, the input resistance is  1. Not same for all digital inputs 2. R for each input 3. 2R for each input 4. 3R for each input 

Last Answer : In an R-2R ladder D/A converter, the input resistance is 3R for each input 

Description : at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Last Answer : 32A

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Last Answer : (a) 160 ohms. (b) 480 ohms

Description : A three dimensional image is obtained by a)Electron microscope b) Scanning electron microscope c) Magnetic imaging d)None of these

Last Answer : b) Scanning electron microscope

Description : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Last Answer : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega ... The equivalent resistance is `7 Omega`. Find n.

Description : Two 10 Ω resistors are connected in parallel, their equivalent resistance isA. 5 Ω B. 0.2 Ω C. 15 Ω D. 20 Ω

Last Answer :  5 Ω

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

Description : When two 100 kΩ resistors are connected in parallel, net resistance is

Last Answer : When two 100 kΩ resistors are connected in parallel, net resistance is 50 kΩ

Description : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Last Answer : What is the total resistance if 5 resistors of 20 Ω each are connected in series? A) 100 Ω B) 4 Ω C) 20 Ω D) None of these

Description : What is the equivalent resistance of a network having 5 resistors of each 10ohm connected in parallel?  (A) 10 Ohms (B) 50 Ohms (C) 500 Ohms (D) 2 Ohms 

Last Answer : D) 2 ohms Solution: 1/Rt = (1/R)(n) 1/Rt = (1/10) (5) 1/Rt = 5/10    Rt = 2 ohms

Description : Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Last Answer : a. 40 W bulb

Description : 24 cells of emf `1.5 V` each having internal resistance of 1 ohm are connected to an external resistance of `1.5` ohms. To get maximum current,

Last Answer : 24 cells of emf `1.5 V` each having internal resistance of 1 ohm are connected to an external ... in series and 4 such rows are connected in parallel

Description : Four resistances are connected in a circuit in the given figure. The electric cirrent flowing through `4 ohm` and `6 ohm` resistance is respectively

Last Answer : Four resistances are connected in a circuit in the given figure. The electric cirrent flowing through `4 ohm` and `6 ... 1 A and 1 A D. 2 A and 2 A

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM

Description : A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Last Answer : ANSWER: W -- 25 OHMS

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

Description : As shown in the figure, 1 ohm resistance is connected across a source that has a load line v + i = 100. The current through the resistance is A) 25 A B) 50 A C) 100 A D) 200A

Last Answer : As shown in the figure, 1 ohm resistance is connected across a source that has a load line v + i = 100. The current through the resistance is 50 A

Description : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly   (A) 0.19 (B) 0.81 (C) 0.97 (D) 1.19

Last Answer : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly 0.81