When a motor is just started, back emf is almost ______:
a. Infinite b. zero c. minimum d. maximum

1 Answer

Answer :

d. maximum

Related questions

Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Last Answer : c. the battery is charged

Description : In the plane of AC generator coil is parallel to the field, then emf induced in coil is: a. maximum b. minimum c. zero d. intermediate

Last Answer : b. minimum

Description : In the plane of the A.C generator coil is perpendicular to the field, then induced emf in the coil is: a. Maximum b. minimum c. zero d. intermediate value

Last Answer : b. minimum

Description : If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Last Answer : Increases

Description : The resistance of a conductor at absolute zero (OK) is a. zero almost b. infinite almost c. May increase or decrease d. None

Last Answer : zero almost

Description : The counter EMF produced in the windings of a DC motor is 'zero' when the ____________. A. armature has just begun to turn B. armature is not turning C. motor is almost up to rated speed D. motor is at rated speed

Last Answer : Answer: B

Description : A wire loop is moved parallel to a uniform magnetic field. The induced emf in the loop: a. depends on the shape b. depends on area c. depends on nature of loop d. zero

Last Answer : d. zero

Description : If velocity of a conductor moving through a magnetic field ‘B’ is made zero, then Motional emf will be: a. –VBL b. –V/BL c. – BL/V d. zero

Last Answer : a. –VBL

Description : The counter EMF of a DC motor is maximum when the _________. A. motor is at rated speed B. armature is not turning C. motor is almost up to rated speed D. armature has just begun to turn

Last Answer : Answer: A

Description : Rest mass of the photon is a) Infinite b) Zero c) Very small d) 1.67  10-27 Kg

Last Answer : b) Zero

Description : The magnetic field is _________ inside a solenoid a) Zero b) uniform c) non-uniform d) infinite

Last Answer : b) uniform

Description : Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Last Answer : a. Infinite

Description : The direction of induced EMF can be found with the help of -

Last Answer : Lenz’s Law

Description : The induced emf in a coil depends upon: a. Strength of magnetic field b. Resistance of the coil c. area of the coil d. All of them

Last Answer : d. All of them

Description : Which of the following will produce an induced emf: a. Changing area of coil b. Changing magnetic flux c. changing orientation of coil d. all of them

Last Answer : c. changing orientation of coil

Description : The phenomena of induced emf was observed by Faraday and Henry in: a. 1931 b. 1831 c. 1535 d. 1940

Last Answer : a. 1931

Description : The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Last Answer : d. mutual inductance

Description : The current flowing in a coil due to induced emf depends upon: a. shape of coil b. resistance of coil c. area of coil d. magnetic flux

Last Answer : a. shape of coil

Description : The induced emf is produced in a circuit due to: a. Initial magnetic flux b. final magnetic flux c. Change of magnetic flux d. constant magnetic flux

Last Answer : d. constant magnetic flux

Description : A neon flashlight cell with an emf of 1.5V gives a current of 15A when connected directly to an ammeter of resistance 0.04?. Internal resistance of the cell is a. 0.0004? b. 0.06? c. 0.10? d. 0.13?

Last Answer : b. 0.06?

Description : If a material object moves with the speed of light ‘c’ its mass becomes a) equal to its rest mass b) Four times of its rest mass c) Double of its rest mass d) Infinite

Last Answer : d) Infinite

Description : The operating cost of a distillation column at minimum reflux ratio is (A) Minimum (B) Maximum (C) Infinite (D) Zero

Last Answer : (A) Minimum

Description : The speed at which the shaft runs so that the additional deflection of the shaft from the axis of rotation becomes ___________, is known as critical or whirling speed. (A) zero (B) minimum (C) maximum (D) infinite

Last Answer : (D) infinite

Description : If the stress produced by a prismatic bar is equal to the working stress, the area of the cross￾section of the prismatic bar, becomes  (A) Zero  (B) Infinite  (C) Maximum  (D) Minimum

Last Answer : (B) Infinite 

Description : The direct cost of a project with respect to normal time is (A) minimum (B) Maximum (C) Zero (D) Infinite

Last Answer : (A) minimum

Description : Why is an air compressor started unloaded?

Last Answer : The air pressure inside the compressor cylinder offers resistance to the movement of the piston. Hence started unloaded. Ask 4/E or 2/E in ship.

Description : Three dimensional CAT Scans reveal the cyst called ______ within the skull. a) arachnoid cyst b) epidermoid cyst c) ganglion cyst d) chalazia cyst

Last Answer : a) arachnoid cyst

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

Description : The open loop gain of the amplifier is ______ (a) 105 (b) 103 (c) 106 (d) 108

Last Answer : (a) 105

Description : A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be (a) zero (b) BLI (c) B2LI (d) BLI2

Last Answer : (a) zero

Description : Air gap has_______eluctance as compared to iron or steel path (a) little (b) lower (c) higher (d) zero

Last Answer : (b) lower

Description : Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Last Answer : (b) Nearly equal to emitter current

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

Description : In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Last Answer : b) Equal to DC value

Description : If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Last Answer : c) A few ohm

Description : Work done by a uniform magnetic field in moving a charged particle in a circular path is a) qvB sin θ b) mg sin θ c) zero d) mg cos θ

Last Answer : Zero

Description : An electron moves with a velocity of 2 × 106 ms-1 in the direction of a uniform magnetic field of 0.8 Tesla. The force on electron is a) 8 N b) 2 N c) 4 N d) Zero

Last Answer : d) Zero

Description : In the following figure, the terminal potential is a. zero b. 2V c. 12V d. 36V

Last Answer : a. zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Description : The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Last Answer : (a) 6.2 × 1018 electrons

Description : When the medium is insulator the electrostatic force between the charges is: (a) Decreased (b) Zero (c) Increased (d) None of above

Last Answer : (a) Decreased

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

Description : The minimum frequency required to eject electrons from a metallic surface is called a) Critical frequency b) Peak value of frequency c) Threshold frequency d)Photo frequency

Last Answer : c) Threshold frequency

Description : The minimum energy required to eject an electron from a metal surface is called a) Intensity b) Threshold frequency c) Work function d) Photo energy

Last Answer : c) Work function

Description : The magnetic flux φB through a plane element of area A⃗ in a uniform magnetic field B⃗⃗ is minimum at a) θ = 900 b) θ = 00 c) θ = 1800 d) None of these

Last Answer : a) θ = 900

Description : The minimum charge on any electron be less than: (a) 1.6×10−19C (b) 3.2×10−19C (c) 1.8×10−19C (d) 9.1×10−19C

Last Answer : (a) 1.6×10−19C

Last Answer : Stepper Motor Such One Kind of Motor Which Equal In the corner Rotation Generated By To whom Step To say Is Since Step by step Step by step Equal In the corner Rotation Creation By So This one Stepper Motor Says.

Last Answer : that Motor AC And DC Both Supply A. Let's go Him Universal Motor Says.

Description : What are the differences between synchronous and induction motor?*

Last Answer : Synchronous motor : Constant speed on all loads, can be operated on a wide range of power factors, not self starting, requires dc excitation.

Description : Where is a rotor wound AC motor used?

Last Answer : For starting heavy torques, mostly used on portable machines and small winches.