Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Under ideal conditions, the collector current is
(a) Equal to base current (b) Nearly equal to emitter current
(c) Less than base current (d) always zero
by

1 Answer

Answer :

(b) Nearly equal to emitter current
by

Related questions

In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Description : In p-n-p transistor, collector current is (a) Equal to emitter current (b) slightly less than emitter current (c) greater than emitter current (d) any of above

Last Answer : (c) greater than emitter current

A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Description : A part of transistor which is heavily doped to produce large number of majority carriers is (a) Emitter (b) Base (c) Collector (d) any of above

Last Answer : (a) Emitter

In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Description : In the transistor schematic symbol, the arrow ________ (a) located on emitter (b) located on base (c) located on collector (d) points from north to south

Last Answer : a) located on emitter

The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Description : The operation of a transistor requires ______ (a) Emitter is heated (b) base is heated (c) collector be heated (d) none of above

Last Answer : (d) none of above

In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Description : In n-p-n transistor, p works as ________ (a) Collector (b) emitter (c) base (d) any of above

Last Answer : c) base

The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Description : The central region of transistor is called (a) Base (b) emitter (c) collector (d) neutral

Last Answer : (b) emitter

In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Description : In a transistor, the conventional current flows from base to emitter. The transistor is (a) NPN (b) PNP (c) FET (d) None of these

Last Answer : (a) NPN

Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Description : Current gain of a transistor which has collector current of 10 mA and a base current of 40 micro Ampere is: (a) 25 (b) 250 (c) 2500 (d) 25000

Last Answer : b) 250

Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. C. Shift the 'Q' point to increase collector current. D. Increase the potential difference between the emitter and the base.

Description : Which of the following actions can be carried out in order to prevent thermal runaway in a transistor? A. Increase the current through the collector-base junction. B. Install a heat sink. ... point to increase collector current. D. Increase the potential difference between the emitter and the base.

Last Answer : Answer: B

The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Description : The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Last Answer : ANSWER: Y -- COLLECTOR CURRENT

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

Is the base region much thinner or much wider than the collector and the emitter regions?

Description : Is the base region much thinner or much wider than the collector and the emitter regions?

Last Answer : yes its thinnerMost of the free electrons that have entered the base do notrecombine with holes because the base is very thin.

The diagram shown in the illustartion represents a/an _____________. EL-0022 A. magnectic amplifier B. common base amplifier C. common collector amplifier D. common emitter amplifier

Description : The diagram shown in the illustartion represents a/an _____________. EL-0022 A. magnectic amplifier B. common base amplifier C. common collector amplifier D. common emitter amplifier

Last Answer : Answer: D

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Last Answer : Answer: C

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0045 A. common emitter B. common collector C. darlington paired, capacitor coupled D. common base

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0045 A. common emitter B. common collector C. darlington paired, capacitor coupled D. common base

Last Answer : Answer: D

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Description : As shown in the illustration, which of the elements listed does the line 'B' represent in the basic schematic symbol of a PNP transistor? EL-0068 A. Base B. Emitter C. Cathode D. Collector

Last Answer : Answer: D

The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward biased and the cathode-gate is forward biased C. source-gate is forward biased and the gate-drain is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Description : The device in figure 'B' shown in the illustration will conduct when the ____________. EL-0067 A. base-emitter is forward biased and the collector-base is reverse biased B. anode-cathode is forward ... is reversed biased D. terminal 1-2 is forward biased and the emitter-terminal 1 is reverse biased

Last Answer : Answer: B

The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'B' shown in the illustration are named _________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: A

Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : Leads on the device in figure 'B' shown in the illustration are named ____________. EL-0067 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: D

Which of the following statements correctly applies to transistors? A. NDN and PNP are the two basic types of transistors. B. The three terminals are called the emitter, base, and collector. C. The emitter separates the base and collector. D. The collector separates the emitter and base.

Description : Which of the following statements correctly applies to transistors? A. NDN and PNP are the two basic types of transistors. B. The three terminals are called the emitter, base, and collector. C. The emitter separates the base and collector. D. The collector separates the emitter and base.

Last Answer : Answer: B

The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Description : The leads of the device in figure 'A' shown in the illustration are named the _______________. EL-0065 A. source, gate and drain B. emitter, base and collector C. emitter, base 1 and base 2 D. anode, cathode and gate

Last Answer : Answer: C

What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Description : What are the three elements of a bipolar transistor? Are they the: w) grid, plate, cathode x) suppressor, deflector, target y) energizer, controller, terminus z) emitter, base, collector

Last Answer : ANSWER: Z -- EMITTER, BASE, COLLECTOR

For the active mode BJT operation (A) Emitter Base Junction is Forward Biased and Collector

Description : For the active mode BJT operation (A) Emitter Base Junction is Forward Biased and Collector Base Junction is Forward Biased (B) Emitter Base Junction is Reverse Biased and Collector Base Junction ... Biased (D) Emitter Base Junction is Reverse Biased and Collector Base Junction is Forward Biased

Last Answer : For the active mode BJT operation Emitter Base Junction is Forward Biased and Collector Base Junction is Reverse Biased.

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

What causes the change in collector current in an emitter injection modulator?

Description : What causes the change in collector current in an emitter injection modulator?

Last Answer : Gain is varied by changing the voltage on the emitter.

In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the

Description : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: (1) 10 µA (2) 100 µA (3) 1 A (4) 10 A 

Last Answer : In the common–emitter transistor circuit, if the current gain is 100 and the collector current is 10 mA, the base current is: 100 µA

The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Description : The emitter of a transistor is doped the heaviest because it: (a) Acts as a supplier of charge carriers (b) Dissipates maximum power c) has a large resistance (d) has a small resistance

Last Answer : (a) Acts as a supplier of charge carriers

In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Description : In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Last Answer : b) Equal to DC value

Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Description : Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Last Answer : a. Infinite

For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances

Last Answer : (A) Water has a high latent heat of evaporation

The value of ∈r for various dielectrics is always: (a) Larger than unity (b) Less than unity (c) Equal to unity (d) None of above

Description : The value of ∈r for various dielectrics is always: (a) Larger than unity (b) Less than unity (c) Equal to unity (d) None of above

Last Answer : (a) Larger than unity

An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Description : An ideal transformer always obeys the law of conservation of........: a. energy b. momentum c. charge d. Flux

Last Answer : b. momentum

Which of the listed components does line 'C' represent for the transistor illustrated? EL-0068 A. Grid B. Plate C. Emitter D. Collector

Description : Which of the listed components does line 'C' represent for the transistor illustrated? EL-0068 A. Grid B. Plate C. Emitter D. Collector

Last Answer : Answer: C

If a transistor were operated with emitter and collector interchanged, then

Description : If a transistor were operated with emitter and collector interchanged, then  1 .emitter current will increase  2. Collector current will increase  3. Base current will decrease  4. No current flow will take place 

Last Answer : If a transistor were operated with emitter and collector interchanged, then Collector current will increase 

A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Description : A body will behave as an “ideal black body” when it acts as: a) A perfect absorber b) A perfect radiator c) A body to have absorption power equal to one d) All of the above

Last Answer : d) All of the above

In a thyristor Latching current is ________ than Holding current a) Equal b) Less c) Greater d) None

Description : In a thyristor Latching current is ________ than Holding current a) Equal b) Less c) Greater d) None

Last Answer : Ans: Greater

The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Description : The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Last Answer : (a) 6.2 × 1018 electrons

A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be (a) zero (b) BLI (c) B2LI (d) BLI2

Description : A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be (a) zero (b) BLI (c) B2LI (d) BLI2

Last Answer : (a) zero

The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be

Description :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be A) 0.98 B) 0.41 C) 59 D) 55  

Last Answer :  If the base current of a BJT is 250 µA and emitter current is 15 mA, then the common base current gain will be 0.98 

Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Description : Paramagnetic materials have relative permeability (a) slightly less than unity (b) equal to unity (c) slightly more than unity (d) equal to that ferromagnetic mate rials

Last Answer : (c) slightly more than unity

Electron can exist in the atom but outside the nucleus because a) speed of electron is equal to the speed of light b) speed of electron is more than speed of light c) speed of electron is less than speed of light d) None of these

Description : Electron can exist in the atom but outside the nucleus because a) speed of electron is equal to the speed of light b) speed of electron is more than speed of light c) speed of electron is less than speed of light d) None of these

Last Answer : c) speed of electron is less than speed of light

“The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Description : “The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Last Answer : c. Ohm’s Law

Pick out the correct statement. (A) Like internal energy and enthalpy, the absolute value of standard entropy for elementary substances is zero (B) Melting of ice involves increase in enthalpy and a decrease in randomness (C) The internal energy of an ideal gas depends only on its pressure (D) Maximum work is done under reversible conditions

Description : Pick out the correct statement. (A) Like internal energy and enthalpy, the absolute value of standard entropy for elementary substances is zero (B) Melting of ice involves increase in enthalpy and ... of an ideal gas depends only on its pressure (D) Maximum work is done under reversible conditions

Last Answer : (D) Maximum work is done under reversible conditions

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Description : The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Last Answer : (b) proportional to X

A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Description : A galvanometer has resistance of 120 Ω. In order to pass 5% of the main current in it, the value of shunt resistance Rs must be equal to a) 6.3 Ω b) 6 Ω c) 2 Ω d) 2.3 Ω

Last Answer : a) 6.3 Ω

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D