In the following figure, the terminal potential is
a. zero b. 2V
c. 12V d. 36V

1 Answer

Answer :

a. zero

Related questions

Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Last Answer : c. the battery is charged

Description : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then connected across an inductor of inductance `0.6mH` What is th

Last Answer : A capacitor of capacity `2muF` is changed to a potential different of `12V` . It is then ... potential difference across the capacitor is `6.0V` ?

Description : Find the energy stored by the capacitor 3F having a potential of 12V across it. a) 432 b) 108 c) 216 d) 54

Last Answer : c) 216

Description : The figure shows an axon terminal and synapse. Select the option giving correct identification of labels A-D. A C D B (a) A-Action potential, C-Neurotransmitter (b) B-Neurotransmitter, D- Receptor capsules (c) C-Receptor, D-Synaptic vesicles (d) A-Axon terminal, B- Serotonin complex

Last Answer : c) C-Receptor, D-Synaptic vesicles

Description : Resistance between points A and B in the circuit shown in figure is a. 4 ohm b. 6ohm c. 10 ohm d. 8 ohm

Last Answer : c. 10 ohm

Description : The current in the circuit shown in figure - What will be the current in the circuit? a. 1/45A b. 1/10A c. 1/5A d. 5A

Last Answer : b. 1/10A

Description : Which of the following is a vector quantity ? (a) Relative permeability (b) Magnetic field intensity (c) Flux density (d) Magnetic potential

Last Answer : (b) Magnetic field intensity

Description : If energy of incident photon is greater than the rest mass energy of electron positron pair, the surplus energy is shared by the pair as, a) Potential energy b) Thermal energy c) Electronic energy d) Kinetic energy

Last Answer : d) Kinetic energy

Description : In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Last Answer : a) Conduct

Description : The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Last Answer : (d) potential barrier

Description : In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Last Answer : (b) decreases

Description : The potential barrier for germanium is _______ (a) 0.6 V (b) 0.2 V (c) 0.3 V (d) 0.5 V

Last Answer : (c) 0.3 V

Description : Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Last Answer : a. mechanical energy

Description : The anodes in a CRO are at ___________ potential with respect to the cathode a) negative b) high negative c) high positive d) positive

Last Answer : c) high positive

Description : A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Last Answer : d) AVO Meter

Description : When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Last Answer : b. 2.5C

Description : All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Last Answer : c. different current but same potential difference

Description : Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Last Answer : c. potential divider

Description : The force per unit charge is called: (a) Electric field (b) Electric field intensity (c) Electric potential energy (d) Electric potential

Last Answer : b) Electric field intensity

Description : A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Last Answer : c) 9000 volts

Description : A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be (a) zero (b) BLI (c) B2LI (d) BLI2

Last Answer : (a) zero

Description : Air gap has_______eluctance as compared to iron or steel path (a) little (b) lower (c) higher (d) zero

Last Answer : (b) lower

Description : Rest mass of the photon is a) Infinite b) Zero c) Very small d) 1.67  10-27 Kg

Last Answer : b) Zero

Description : Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Last Answer : (b) Nearly equal to emitter current

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

Description : In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Last Answer : b) Equal to DC value

Description : If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Last Answer : c) A few ohm

Description : In the plane of AC generator coil is parallel to the field, then emf induced in coil is: a. maximum b. minimum c. zero d. intermediate

Last Answer : b. minimum

Description : In the plane of the A.C generator coil is perpendicular to the field, then induced emf in the coil is: a. Maximum b. minimum c. zero d. intermediate value

Last Answer : b. minimum

Description : When a motor is just started, back emf is almost ______: a. Infinite b. zero c. minimum d. maximum

Last Answer : d. maximum

Description : If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Last Answer : Increases

Description : A wire loop is moved parallel to a uniform magnetic field. The induced emf in the loop: a. depends on the shape b. depends on area c. depends on nature of loop d. zero

Last Answer : d. zero

Description : If velocity of a conductor moving through a magnetic field ‘B’ is made zero, then Motional emf will be: a. –VBL b. –V/BL c. – BL/V d. zero

Last Answer : a. –VBL

Description : The magnetic field is _________ inside a solenoid a) Zero b) uniform c) non-uniform d) infinite

Last Answer : b) uniform

Description : Work done by a uniform magnetic field in moving a charged particle in a circular path is a) qvB sin θ b) mg sin θ c) zero d) mg cos θ

Last Answer : Zero

Description : An electron moves with a velocity of 2 × 106 ms-1 in the direction of a uniform magnetic field of 0.8 Tesla. The force on electron is a) 8 N b) 2 N c) 4 N d) Zero

Last Answer : d) Zero

Description : The resistance of a conductor at absolute zero (OK) is a. zero almost b. infinite almost c. May increase or decrease d. None

Last Answer : zero almost

Description : Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Last Answer : a. Infinite

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Description : The number of electrons in one coulomb charge is equal to: (a) 6.2 × 1018 electrons (b) Zero electrons (c) 1.6 × 10−22 electrons (d) 6.2 × 1021 electrons

Last Answer : (a) 6.2 × 1018 electrons

Description : When the medium is insulator the electrostatic force between the charges is: (a) Decreased (b) Zero (c) Increased (d) None of above

Last Answer : (a) Decreased

Description : A camcorder battery plate claims that the unit stores 2700mAHr at 7.2v.What is the total charge and energy stored?

Last Answer : Homework?

Description : A circuit consists of three bateries of emf `E_(1) = 1V, E_(2)=2V` and `E_(3)=3V` and internal resistance `1Omega, 2Omega` and `1Omega` respectively w

Last Answer : A circuit consists of three bateries of emf `E_(1) = 1V, E_(2)=2V` and `E_(3)=3V` and internal resistance `1Omega, ... ` B. `2.0V` C. `2.2V` D. `3.0V`

Description : A potentiometer wire of length `100 cm` having a resistance of `10 Omega` is connected in series with a resistance `R` and a cell of emf `2V` of negli

Last Answer : A potentiometer wire of length `100 cm` having a resistance of `10 Omega` is connected in series with a ... Omega` C. `790 Omega` D. `840 Omega`

Description : A ball is moving with a speed v towards north, collides with an identical ball, moving with the same speed towards east. After the collision, the two balls stick together and move towards north –east. The speed of the combination is (a) 2v (b) 3v (c) v (d) v/2

Last Answer : Ans:(c)

Description : Work done in charging a capacitor is given by A. (1⁄2)QV B. 2QV C. QV D. 2V

Last Answer : (1⁄2)QV

Description : Find the capacitance when charge is 20 C has a voltage of 1.2V. a) 32.67 b) 16.67 c) 6.67 d) 12.33

Last Answer : b) 16.67

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Description : Which of the following relationships is correct for relating the three elastic constants of an isotropic elastic material (where, E = Young's modulus, G = Modulus of rigidity or shear modulus v = Poisson's ratio)? (A) E = 2G (1 + v) (B) E = G (1 + v) (C) E = G (1 + v)/2 (D) E = 2G (1 + 2v)

Last Answer : (A) E = 2G (1 + v)

Description : For a transmission line, the incident voltage. Ei = 6V and Er =2V ,Calculate: (i) Reflection Coefficient (ii) SWR

Last Answer : Reflection Coefficient(K) = Er / Ei  = 2V / 6V  K = 0.333 SWR = 1+K / 1- K  = 1+0.333 / 1-0.333  = 1.333 / 0.667 SWR= 1.998