At temperatures above a limiting value, the energy of lattice vibrations, in a conductor, increases linearly with...

At temperatures above a limiting value, the energy of lattice vibrations, in a conductor, increases linearly with temperature so that resistivity increases linearly with temperature. In this region, this limiting value of temperature is called
by

1 Answer

Answer :

At temperatures above a limiting value, the energy of lattice vibrations, in a conductor, increases linearly with temperature so that resistivity increases linearly with temperature. In this region, this limiting value of temperature is called Debye temperature

by

Related questions

What happens if Lattice energy increases ?

Description : What happens if Lattice energy increases ?

Last Answer : • The Strength of ionic bond • Stability of the Ionic compound • Ease of formation of the Ionic bond Increases

As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re << 1 (A) Increases linearly with V (B) Decreases linearly with V (C) Decreases as V2 (D) None of these

Description : As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re

Last Answer : (A) Increases linearly with V

With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project (A) Decreases (B) Increases (C) Increases linearly (D) Remain constant

Description : With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project (A) Decreases (B) Increases (C) Increases linearly (D) Remain constant

Last Answer : (A) Decreases

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

Description : With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases (B) Increases linearly (C) Decreases (D) Is not affected

Last Answer : (A) Increases

With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Description : With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Last Answer : (A) Increases

With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Description : With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Last Answer : (A) Increases

With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Description : With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Last Answer : (A) Increases

With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Description : With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Last Answer : (B) Decreases

With increase in temperature, the rate of extraction in leaching (solid￾liquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Description : With increase in temperature, the rate of extraction in leaching (solid￾liquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Last Answer : (A) Increases

With increase in temperature, the total emissivity of conductors (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Description : With increase in temperature, the total emissivity of conductors (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Last Answer : (A) Increases

In under damped vibrating system, the amplitude of vibration ______. (A) decreases linearly with time (B) increases linearly with time (C) decreases exponentially with time (D) increases exponentially with time

Description : In under damped vibrating system, the amplitude of vibration ______. (A) decreases linearly with time (B) increases linearly with time (C) decreases exponentially with time (D) increases exponentially with time

Last Answer : (C) decreases exponentially with time

During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Description : During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Last Answer : (D) Absolute roughness increases linearly with time

In the slow start phase of the TCP congestion control algorithm, the size of the congestion window a. does not increase b. increases linearly c. increases quadratically d. increases exponentially

Description : In the slow start phase of the TCP congestion control algorithm, the size of the congestion window a. does not increase b. increases linearly c. increases quadratically d. increases exponentially

Last Answer : d. increases exponentially

Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section(B) Remains constant over the cross-section(C) Is zero at the centre and varies linearly with the radius(D) Is zero at the wall and increases linearly to the centre

Description : Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section (B) Remains constant over the cross-section (C) Is zero at the centre and varies linearly with the radius (D) Is zero at the wall and increases linearly to the centre

Last Answer : (C) Is zero at the centre and varies linearly with the radius

With increase in temperature, the vapor pressure of liquids (A) Increases (B) Increases linearly (C) Decreases (D) Remain constant

Description : With increase in temperature, the vapor pressure of liquids (A) Increases (B) Increases linearly (C) Decreases (D) Remain constant

Last Answer : (A) Increases

Velocity distribution for flow between two fixed parallel plates (A) Varies parabolically across the section (B) Is constant over the entire cross-section (C) Is zero at the plates and increases linearly to the mid-plane (D) None of these

Description : Velocity distribution for flow between two fixed parallel plates (A) Varies parabolically across the section (B) Is constant over the entire cross-section (C) Is zero at the plates and increases linearly to the mid-plane (D) None of these

Last Answer : (A) Varies parabolically across the section

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Description : In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Last Answer : (B) Pressure drop is almost constant

With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Description : With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Last Answer : (B) Increases linearly

With decrease in temperature, the equilibrium conversion of a reversible endothermic reaction (A) Decreases (B) Increases (C) Remain unaffected (D) Increases linearly with temperature

Description : With decrease in temperature, the equilibrium conversion of a reversible endothermic reaction (A) Decreases (B) Increases (C) Remain unaffected (D) Increases linearly with temperature

Last Answer : (A) Decreases

For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Description : For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Description : With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Last Answer : (A) Decreases

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Description : Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Last Answer : (B) Exponentially

With increase in temperature, the equilibrium conversion of a reversibleexothermic reaction(A) Decreases(B) Increases(C) Remain unaffected(D) Decreases linearly with temperature

Description : With increase in temperature, the equilibrium conversion of a reversibleexothermic reaction (A) Decreases (B) Increases (C) Remain unaffected (D) Decreases linearly with temperature

Last Answer : (A) Decreases

With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases(B) Increases linearly(C) Decreases(D) Decreases linearly

Description : With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases (B) Increases linearly (C) Decreases (D) Decreases linearly

Last Answer : (C) Decreases

The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

With increase in temperature, the atomic heat capacities of all solid elements (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : With increase in temperature, the atomic heat capacities of all solid elements (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

With increase in compression ratio, the efficiency of the otto engine (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Description : With increase in compression ratio, the efficiency of the otto engine (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Last Answer : (A) Increases

For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Description : For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Last Answer : (B) Increases

With increase in reduced temperature, the fugacity co-efficient of a gas at constant reduced pressure (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Description : With increase in reduced temperature, the fugacity co-efficient of a gas at constant reduced pressure (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Last Answer : (A) Increases

With increase in temperature, the surface tension of water (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Description : With increase in temperature, the surface tension of water (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Last Answer : Option B

When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distanceB) Increases linearly as its radial distance (C) Increases as the square of the radial distance (D) Decreases as the square of the radial distance

Description : When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distance B) Increases linearly as ... as the square of the radial distance (D) Decreases as the square of the radial distance

Last Answer : Answer: Option A

In an isothermal atmosphere, the pressure (A) Decreases linearly with elevation (B) Remain constant (C) Varies in the same way as the density (D) Increases exponentially with elevation

Description : In an isothermal atmosphere, the pressure (A) Decreases linearly with elevation (B) Remain constant (C) Varies in the same way as the density (D) Increases exponentially with elevation

Last Answer : Answer: Option C

Assertion : Current versus potential difference (i-V) graph for a conductor at two different temperatures `T_(1)` and `T_(2)` is shown in figure. Henc

Description : Assertion : Current versus potential difference (i-V) graph for a conductor at two different temperatures `T_(1)` and `T_(2)` is shown in figure. Henc

Last Answer : Assertion : Current versus potential difference (i-V) graph for a conductor at two different ... If Assertion is false but Reason is true.

Which of the following statements is not true about diamonds? (a) It is the purest form of carbon (b) It is the hardest naturally occurring substance (c) It is a good conductor of electricity (d) Artificial diamonds can be prepared by subjecting a solution of pure carbon in iron to very high pressures and temperatures

Description : Which of the following statements is not true about diamonds? (a) It is the purest form of carbon (b) It is the hardest naturally occurring substance (c) It is a good conductor of ... diamonds can be prepared by subjecting a solution of pure carbon in iron to very high pressures and temperatures

Last Answer : Ans:(c)

A semiconductor is a material with a _____________. A. conductivity higher than a normal conductor B. conductivity higher than a normal insulator C. high conductivity at low temperatures D. low conductivity at high temperatures

Description : A semiconductor is a material with a _____________. A. conductivity higher than a normal conductor B. conductivity higher than a normal insulator C. high conductivity at low temperatures D. low conductivity at high temperatures

Last Answer : Answer: B

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

Which show highest lattice energy :-

Description : Which show highest lattice energy :-

Last Answer : Which show highest lattice energy :- A. CsI B. MgO C. `CaF_(2)` D. NaF

The correct expected order of decreasing lattice energy is :-

Description : The correct expected order of decreasing lattice energy is :-

Last Answer : The correct expected order of decreasing lattice energy is :- A. `CaO gt MgBr_(2) gt CsI` B. `MgBr_(2) gt ... 2) gt CaO` D. `CsI gt CaO gt MgBr_(2)`

What is the lattice energy of Nacl ?

Description : What is the lattice energy of Nacl ?

Last Answer : -796.69k.j

Define lattice energy.

Description : Define lattice energy.

Last Answer : The energy released when one mole of ionic crystal is formed by the combination of the corresponding gaseous (+ve) and (-ve) ions brought from infinite distance is called lattice energy.

If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? A. Increases 4 times B. Increases 2 times C. Decreases 4 times D. Decreases 2 times

Description : If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? A. Increases 4 times B. Increases 2 times C. Decreases 4 times D. Decreases 2 times

Last Answer : B. Increases 2 times

f the length inertia is decreased to nine times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 3 times b) Increases 9 times c) Decreases 9 times d) Decreases 3 times

Description : f the length inertia is decreased to nine times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 3 times b) Increases 9 times c) Decreases 9 times d) Decreases 3 times

Last Answer : a) Increases 3 times

If the mass moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Description : If the mass moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Last Answer : d) Decreases 2 times

If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Description : If the polar moment of inertia is increased to four times, then what will be the effect on free torsional vibrations of a single motor system? a) Increases 4 times b) Increases 2 times c) Decreases 4 times d) Decreases 2 times

Last Answer : b) Increases 2 times