With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

With increase in drum speed, in a rotary drum filter, the filtration rate
(A) Increases
(B) Increases linearly
(C) Decreases
(D) Is not affected
by

1 Answer

Answer :

(A) Increases
by

Related questions

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Description : The speed of a rotary drum vacuum filter may be about __________ rpm. (A) 1 (B) 50 (C) 100 (D) 500

Last Answer : (A) 1

Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Description : Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Last Answer : (B) 1/√μ

With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Description : With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Last Answer : (A) Increases

With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Description : With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Last Answer : (B) Decreases

With increase in temperature, the rate of extraction in leaching (solid￾liquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Description : With increase in temperature, the rate of extraction in leaching (solid￾liquid extraction system). (A) Increases (B) Decreases (C) Remain unaffected (D) Increases Linearly

Last Answer : (A) Increases

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project (A) Decreases (B) Increases (C) Increases linearly (D) Remain constant

Description : With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project (A) Decreases (B) Increases (C) Increases linearly (D) Remain constant

Last Answer : (A) Decreases

__________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Description : __________ is used for producing a thick suspension from a thin slurry. (A) Cartridge filter (B) Rotary drum vacuum filter (C) Pressure filter thickener (D) Plate and frame filter press

Last Answer : (C) Pressure filter thickener

For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Description : For separation of sugar solution from settled out mud, we use a __________ filter. (A) Sparkler (B) Plate and frame (C) Centrifugal (D) Rotary drum vacuum

Last Answer : (C) Centrifugal

Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter(A) Filtering(B) Washing(C) Drying(D) All (A), (B) & (C).

Description : Vacuum is applied in __________ zone, in case of a general type continuous rotary drum vacuum filter. (A) Filtering (B) Washing (C) Drying (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The controlling resistance in a rotary drum vacuum filter is the __________ resistance.(A) Piping (B) Cake (C) Filter medium (D) None of these

Description : The controlling resistance in a rotary drum vacuum filter is the __________ resistance. (A) Piping (B) Cake (C) Filter medium (D) None of these

Last Answer : (B) Cake

Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Description : Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Last Answer : (B) 30

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Description : With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Last Answer : (A) Increases

With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Description : With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Last Answer : (A) Increases

With increase in temperature, the total emissivity of conductors (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Description : With increase in temperature, the total emissivity of conductors (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Last Answer : (A) Increases

With increase in temperature, the vapor pressure of liquids (A) Increases (B) Increases linearly (C) Decreases (D) Remain constant

Description : With increase in temperature, the vapor pressure of liquids (A) Increases (B) Increases linearly (C) Decreases (D) Remain constant

Last Answer : (A) Increases

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Description : With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Last Answer : (B) Increases linearly

With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Description : With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Last Answer : (A) Decreases

With increase in temperature, the equilibrium conversion of a reversibleexothermic reaction(A) Decreases(B) Increases(C) Remain unaffected(D) Decreases linearly with temperature

Description : With increase in temperature, the equilibrium conversion of a reversibleexothermic reaction (A) Decreases (B) Increases (C) Remain unaffected (D) Decreases linearly with temperature

Last Answer : (A) Decreases

With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases(B) Increases linearly(C) Decreases(D) Decreases linearly

Description : With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases (B) Increases linearly (C) Decreases (D) Decreases linearly

Last Answer : (C) Decreases

With increase in temperature, the atomic heat capacities of all solid elements (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : With increase in temperature, the atomic heat capacities of all solid elements (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

With increase in compression ratio, the efficiency of the otto engine (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Description : With increase in compression ratio, the efficiency of the otto engine (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Last Answer : (A) Increases

With increase in reduced temperature, the fugacity co-efficient of a gas at constant reduced pressure (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Description : With increase in reduced temperature, the fugacity co-efficient of a gas at constant reduced pressure (A) Increases (B) Decreases (C) Remain same (D) Decreases linearly

Last Answer : (A) Increases

With increase in temperature, the surface tension of water (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Description : With increase in temperature, the surface tension of water (A) Increases (B) Decreases (C) Remain constant (D) Increases linearly

Last Answer : Option B

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Description : Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Last Answer : (C) Increase the porosity of the cake

. In constant pressure filtration, (A) Resistance decreases with time (B) Rate of filtration is constant(C) Rate of filtration increases with time(D) Rate of filtration decreases with time

Description : . In constant pressure filtration, (A) Resistance decreases with time (B) Rate of filtration is constant (C) Rate of filtration increases with time (D) Rate of filtration decreases with time

Last Answer : (D) Rate of filtration decreases with time

The inlet pressure in a constant rate filtration (A) Increases continuously (B) Decreases gradually (C) Remains constant (D) None of these

Description : The inlet pressure in a constant rate filtration (A) Increases continuously (B) Decreases gradually (C) Remains constant (D) None of these

Last Answer : (A) Increases continuously

In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Description : In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Last Answer : (B) Pressure drop is almost constant

During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Description : During ageing of fluid carrying pipes, the (A) Pipe becomes smoother with use (B) Friction factor increases linearly with time (C) Absolute roughness decreases with time (D) Absolute roughness increases linearly with time

Last Answer : (D) Absolute roughness increases linearly with time

As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re << 1 (A) Increases linearly with V (B) Decreases linearly with V (C) Decreases as V2 (D) None of these

Description : As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re

Last Answer : (A) Increases linearly with V

With decrease in temperature, the equilibrium conversion of a reversible endothermic reaction (A) Decreases (B) Increases (C) Remain unaffected (D) Increases linearly with temperature

Description : With decrease in temperature, the equilibrium conversion of a reversible endothermic reaction (A) Decreases (B) Increases (C) Remain unaffected (D) Increases linearly with temperature

Last Answer : (A) Decreases

The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Description : For a stable phase at constant pressure and temperature, the fugacity of each component in a binary system __________ as its mole fraction increases. (A) Decreases (B) Increases (C) Remain same (D) Decreases linearly

Last Answer : (B) Increases

With increase in steam pressure, its specific volume decreases (A) Rapidly first and then slowly (B) Linearly (C) Slowly first and then rapidly (D) Exponentially

Description : With increase in steam pressure, its specific volume decreases (A) Rapidly first and then slowly (B) Linearly (C) Slowly first and then rapidly (D) Exponentially

Last Answer : Option A

In under damped vibrating system, the amplitude of vibration ______. (A) decreases linearly with time (B) increases linearly with time (C) decreases exponentially with time (D) increases exponentially with time

Description : In under damped vibrating system, the amplitude of vibration ______. (A) decreases linearly with time (B) increases linearly with time (C) decreases exponentially with time (D) increases exponentially with time

Last Answer : (C) decreases exponentially with time

When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distanceB) Increases linearly as its radial distance (C) Increases as the square of the radial distance (D) Decreases as the square of the radial distance

Description : When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distance B) Increases linearly as ... as the square of the radial distance (D) Decreases as the square of the radial distance

Last Answer : Answer: Option A

In an isothermal atmosphere, the pressure (A) Decreases linearly with elevation (B) Remain constant (C) Varies in the same way as the density (D) Increases exponentially with elevation

Description : In an isothermal atmosphere, the pressure (A) Decreases linearly with elevation (B) Remain constant (C) Varies in the same way as the density (D) Increases exponentially with elevation

Last Answer : Answer: Option C

In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Description : In case of vertical tube evaporator, with increase in liquor level, the overall heat transfer co-efficient (A) Increases (B) Decreases (C) Is not affected (D) May increase or decrease; depends on the feed

Last Answer : (B) Decreases

Free energy, fugacity and activity co-efficient are all affected by change in the temperature. The fugacity co-efficient of a gas at constant pressure ____with the increase of reduced temperature. (A) Decreases (B) Increases (C) Remains constant

Description : Free energy, fugacity and activity co-efficient are all affected by change in the temperature. The fugacity co-efficient of a gas at constant pressure ____with the increase of reduced temperature. (A) Decreases (B) Increases (C) Remains constant

Last Answer : (B) Increases

Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Sedimentation on commercial scale occurs in (A) Classifiers (B) Thickeners (C) Rotary drum filters (D) Cyclones

Description : Sedimentation on commercial scale occurs in (A) Classifiers (B) Thickeners (C) Rotary drum filters (D) Cyclones

Last Answer : (C) Rotary drum filters

Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Description : Free flowing granular materials can be best dried in a __________ drier. (A) Rotary (B) Cylinder (C) Drum (D) Freeze

Last Answer : (A) Rotary

A slurry is to be dried to produce flaky solid. Which dryer would you recommend? (A) Spray dryer (B) Drum dryer (C) Rotary dryer (D) Dielectric drye

Description : A slurry is to be dried to produce flaky solid. Which dryer would you recommend? (A) Spray dryer (B) Drum dryer (C) Rotary dryer (D) Dielectric drye

Last Answer : (A) Spray dryer