Velocity distribution for flow between two fixed parallel plates (A) Varies parabolically across the section (B) Is constant over the entire cross-section (C) Is zero at the plates and increases linearly to the mid-plane (D) None of these

Velocity distribution for flow between two fixed parallel plates
(A) Varies parabolically across the section
(B) Is constant over the entire cross-section
(C) Is zero at the plates and increases linearly to the mid-plane
(D) None of these
by

1 Answer

Answer :

(A) Varies parabolically across the section
by

Related questions

Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section(B) Remains constant over the cross-section(C) Is zero at the centre and varies linearly with the radius(D) Is zero at the wall and increases linearly to the centre

Description : Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section (B) Remains constant over the cross-section (C) Is zero at the centre and varies linearly with the radius (D) Is zero at the wall and increases linearly to the centre

Last Answer : (C) Is zero at the centre and varies linearly with the radius

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Description : Volume change for unimolecular type first order reaction as shown in the bellow figure, increases __________ with time. (A) Linearly (B) Exponentially (C) Parabolically (D) Logarithmically

Last Answer : (B) Exponentially

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is equivalent to a rigid boundary(C) Streamlines intersect at isolated point of zero velocity and infinitevelocity(D) The fluid lying between any two streamlines can be considered to be inisolation and the streamline spacing varies inversely as the velocity

Description : Pick out the wrong statement about a streamline. (A) It is always parallel to the main direction of the fluid flow (B) It is a line across which there is no flow and it is ... any two streamlines can be considered to be in isolation and the streamline spacing varies inversely as the velocity

Last Answer : (A) It is always parallel to the main direction of the fluid flow

When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distanceB) Increases linearly as its radial distance (C) Increases as the square of the radial distance (D) Decreases as the square of the radial distance

Description : When a cylindrical vessel containing liquid is revolved about its vertical axis at a constant angular velocity, the pressure (A) Varies as the square of the radial distance B) Increases linearly as ... as the square of the radial distance (D) Decreases as the square of the radial distance

Last Answer : Answer: Option A

Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with time Which of these statements in respect of stream flow pattern are correct? (a) 1, 2, 3 and 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Description : Consider the following statements : 1. There is no flow across a streamline 2. Streamline spacing varies directly with velocity at the section 3. Streamlines do not cross 4. In steady flow, streamline pattern does not change with ... 4 (b) 1 and 2 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only

Last Answer : (c) 1, 3 and 4 only

A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Description : A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Last Answer : (A) Fixed in space in steady flow

For a fluid rotating at constant angular velocity about vertical axis as a rigid body, the pressure intensity varies as the (A) Square of the radial distance (B) Radial distance linearly (C) Inverse of the radial distance(D) Elevation along vertical direction

Description : For a fluid rotating at constant angular velocity about vertical axis as a rigid body, the pressure intensity varies as the (A) Square of the radial distance (B) Radial distance linearly (C) Inverse of the radial distance (D) Elevation along vertical direction

Last Answer : (A) Square of the radial distance

A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Description : A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Last Answer : ANSWER: W -- CONSTANT

In an isothermal atmosphere, the pressure (A) Decreases linearly with elevation (B) Remain constant (C) Varies in the same way as the density (D) Increases exponentially with elevation

Description : In an isothermal atmosphere, the pressure (A) Decreases linearly with elevation (B) Remain constant (C) Varies in the same way as the density (D) Increases exponentially with elevation

Last Answer : Answer: Option C

With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Description : With increase in the pressure drop across the cake, the specific cake resistance for the compressible sludge (A) Increases (B) Decreases (C) Remains constant (D) Increases linearly

Last Answer : (A) Increases

Stress in the cross section of a shaft at the centre ________ a. is zero b. decreases linearly to the maximum value of at outer surface c. both a. and b. d. none of the above

Description : Stress in the cross section of a shaft at the centre ________ a. is zero b. decreases linearly to the maximum value of at outer surface c. both a. and b. d. none of the above

Last Answer : a. is zero

The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Description : The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Last Answer : (C) Varies exponentially, being more near the torque-input end

As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re << 1 (A) Increases linearly with V (B) Decreases linearly with V (C) Decreases as V2 (D) None of these

Description : As the velocity V and thus the Reynolds number of a flow past a sphere increases from very low value, the drag force for Re

Last Answer : (A) Increases linearly with V

In laminar flow through a round tube, the discharge varies (A) Linearly as the viscosity (B) Inversely as the pressure drop (C) Inversely as the viscosity (D) As the square of the radius

Description : In laminar flow through a round tube, the discharge varies (A) Linearly as the viscosity (B) Inversely as the pressure drop (C) Inversely as the viscosity (D) As the square of the radius

Last Answer : (C) Inversely as the viscosity

In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Description : In area meter (e.g., Rotameter), with increase in the fluid flow rate, the (A) Pressure drop increases linearly (B) Pressure drop is almost constant (C) Area through which fluid flows does not vary (D) None of these

Last Answer : (B) Pressure drop is almost constant

With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project (A) Decreases (B) Increases (C) Increases linearly (D) Remain constant

Description : With increase in the discounted cash flow rate of return, the ratio of the total present value to the initial investment of a given project (A) Decreases (B) Increases (C) Increases linearly (D) Remain constant

Last Answer : (A) Decreases

The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Description : The most economical channel section for the fluid flow is the one for which the discharge is maximum for a given cross-sectional area. Vertical velocity distribution in an open channel for laminar flow can be assumed to be (A) Parabolic (B) Hyperbolic (C) Straight line (D) None of these

Last Answer : (A) Parabolic

The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Last Answer : Answer: Option D

In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. normal stress varies linearly in the material c. elastic constants are same in all the directions d. elastic constants varies linearly in the material

Description : In a simple bending theory, one of the assumption is that the material of the beam is isotropic. This assumption means that the a. normal stress remains constant in all directions b. ... c. elastic constants are same in all the directions d. elastic constants varies linearly in the material

Last Answer : c. elastic constants are same in all the directions

In case of Couette flow, the fluid flow is between two large flat parallel plates with (A) Top plate moving and the bottom plate fixed (B) Bottom plate moving and the top plate fixed (C) Both the plates fixed (D) Both the plates moving

Description : In case of Couette flow, the fluid flow is between two large flat parallel plates with (A) Top plate moving and the bottom plate fixed (B) Bottom plate moving and the top plate fixed (C) Both the plates fixed (D) Both the plates moving

Last Answer : (A) Top plate moving and the bottom plate fixed

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

The general expression for the B.M. of a beam of length l is the beam carries M = (wl/2) x - (wx²/2) (A) A uniformly distributed load w/unit length (B) A load varying linearly from zero at one end to w at the other end (C) An isolated load at mid span (D) None of these

Description : The general expression for the B.M. of a beam of length l is the beam carries M = (wl/2) x - (wx²/2)  (A) A uniformly distributed load w/unit length  (B) A load varying linearly from zero at one end to w at the other end  (C) An isolated load at mid span  (D) None of these 

Last Answer : (A) A uniformly distributed load w/unit length 

The ratio of maximum to average velocity in case of streamline flow between parallel plates is (A) 1 (B) 1.5 (C) 2 (D) 2.5

Description : The ratio of maximum to average velocity in case of streamline flow between parallel plates is (A) 1 (B) 1.5 (C) 2 (D) 2.5

Last Answer : (B) 1.5

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Description : In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Last Answer : (A) Square root of the velocity

The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Last Answer : (B) Pseudo-plastic

The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Last Answer : (A) Newtonian

The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Description : The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Last Answer : (A) Dilatent

When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface

Description : When a fluid flows over a solid surface, the (A) Velocity is uniform at any cross-section (B) Velocity gradient is zero at the solid surface (C) Resistance between the surface & the fluid is lesser as compared to that between the fluid layers themselves (D) Velocity is not zero at the solid surface

Last Answer : (B) Velocity gradient is zero at the solid surface

With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Description : With increase in gas rate, the number of transfer units, NtoG, for a fixed degree of absorption by a fixed amount of solvent (A) Increases (B) Decreases (C) Decreases linearly (D) Remains unaffected

Last Answer : (A) Increases

With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Description : With increase in solvent rate, the number of transfer units, NtoG, for a fixed degree of absorption from a fixed amount of gas (A) Increases (B) Decreases (C) Decreases linearly (D) Remain unaffected

Last Answer : (B) Decreases

In a R.C section under flexure, the assumption that “a plane section before bending remains plane after bending” leads to (a) Strain distribution being linear across the depth (b) Stress distribution being linear across the depth (c) Both stress and strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Description : In a R.C section under flexure, the assumption that a plane section before bending remains plane after bending leads to (a) Strain distribution being linear across the depth (b) ... strain distribution being linear across the depth (d) Shear stress distribution being uniform along the depth

Last Answer : (a) Strain distribution being linear across the depth

A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Description : A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Last Answer : (C) Drawn normal to the velocity vector at every point

Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the centre of the pipe. 4. Hydraulic gradient varies as the square of the mean velocity of flow. Which of these statements are correct? (a) 1, 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Description : Consider the following statements in respect of steady laminar flow through a circular pipe: 1. Shear stress is zero on the central axis of the pipe 2. Discharge varies directly with the viscosity of the fluid 3. Velocity is maximum at the ... 2 , 3 & 4 (b) 1 & 3 only (c) 2 & 4 only (d)3 & 4 only

Last Answer : (b) 1 & 3 only

The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight across the slot and around the iron at the bottom (c) The permanence of air paths is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Description : The slot leakage can be calculated by making which of the following assumptions ? (a) The current in the slot conductors is uniformly distributed over their cross-section (b) The leakage path is straight ... is only considered. The reluctance of iron paths is assumed as zero (d) All of the above

Last Answer : (d) All of the above

For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Description : For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The velocity distribution in direction normal to the direction of flow in plane Poiseuille flow is (A) Hyperbolic (B) Parabolic (C) Linear (D) None of these

Description : The velocity distribution in direction normal to the direction of flow in plane Poiseuille flow is (A) Hyperbolic (B) Parabolic (C) Linear (D) None of these

Last Answer : (B) Parabolic

Which of the following phrases completes the following statement: The strength of the electric field between two oppositely charged parallel plates is: w) a maximum midway between the plates x) a maximum near the positively charged plate y) constant between the plates except near the edges z) zero midway between the plates

Description : Which of the following phrases completes the following statement: The strength of the electric field between two oppositely charged parallel plates is: w) a maximum midway between the plates x) a maximum ... plate y) constant between the plates except near the edges z) zero midway between the plates

Last Answer : ANSWER: Y -- CONSTANT BETWEEN THE PLATES EXCEPT NEAR THE EDGES

In a free vortex, the (A) Velocity changes linearly with radial distance (B) Flow is necessarily rotational (C) Radial component of velocity is same everywhere (D) Stream lines are not circular

Description : In a free vortex, the (A) Velocity changes linearly with radial distance (B) Flow is necessarily rotational (C) Radial component of velocity is same everywhere (D) Stream lines are not circular

Last Answer : (A) Velocity changes linearly with radial distance

Consider the following statements: Mitra’s hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate of change of velocity per unit length of transition is constant throughout the length of the transition. Which of these statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements: Mitra's hyperbolic transition design is based on the principle that : 1. Flow depth in the canal, as well as the discharge, is constant 2. width of the canal varies along with the discharge 3. Rate ... a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : d) 1 and 3 only

In case of an ideal solution, the total vapor pressure varies __________ with the composition expressed as mole fraction, (A) Inversely (B) Linearly (C) Exponentially (D) None of these

Description : In case of an ideal solution, the total vapor pressure varies __________ with the composition expressed as mole fraction, (A) Inversely (B) Linearly (C) Exponentially (D) None of these

Last Answer : (B) Linearly

The moment diagram for a cantilever carrying linearly varying load from zero at its free end and to maximum at the fixed end will be a (A) Triangle (B) Rectangle (C) Parabola (D) Cubic parabola

Description : The moment diagram for a cantilever carrying linearly varying load from zero at its free end and to maximum at the fixed end will be a (A) Triangle (B) Rectangle (C) Parabola (D) Cubic parabola

Last Answer : (D) Cubic parabola

With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Description : With increase in absolute humidity, the dew point of an unsaturated mixture of air and water vapor (at constant pressure and temperature). (A) Increases (B) Remains unchanged (C) Decreases (D) Decreases linearly

Last Answer : (A) Increases

With increase in temperature, the vapor pressure of liquids (A) Increases (B) Increases linearly (C) Decreases (D) Remain constant

Description : With increase in temperature, the vapor pressure of liquids (A) Increases (B) Increases linearly (C) Decreases (D) Remain constant

Last Answer : (A) Increases

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Description : With the increase in depth, the hydrostatic pressure in an un-accelerated incompressible fluid (in a constant gravitational field) (A) Decreases (B) Increases linearly (C) Increases exponentially (D) Remain constant

Last Answer : (B) Increases linearly

With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases(B) Increases linearly(C) Decreases(D) Decreases linearly

Description : With increase in temperature, the equilibrium constant at constant pressure (Kp) for oxidation of sulphur dioxide (A) Increases (B) Increases linearly (C) Decreases (D) Decreases linearly

Last Answer : (C) Decreases