A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ?

A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ?

(A) 1.5 V/μs (B) 1.05 V/μs (C) 0.15mV/s (D) 10.5 mV/s
by

1 Answer

Answer :

A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ?

(A) 1.5 V/μs (B) 1.05 V/μs (C) 0.15mV/s (D) 10.5 mV/s

by

Related questions

An OP amp has a slew rate of 1V/µs. At a signal frequency of 0.1 MHz, the maximum undistorted sine wave ...

Description : An OP amp has a slew rate of 1V/µs. At a signal frequency of 0.1 MHz, the maximum undistorted sine wave amplitude is (a) 8V (b) 4.82 V (c) 2.02 V (d) 1.592 V

Last Answer : Slew rate = 2πfv where v is the amplitude V=(1/2π*0.1) = 1.592V

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an

Description : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

A 12 -pole, 440 V, 50 Hz, 3 -phase synchronous motor takes a line current of 100 A at 0.8 pf leading....

Description : A 12 -pole, 440 V, 50 Hz, 3 -phase synchronous motor takes a line current of 100 A at 0.8 pf leading. Neglecting losses, the torque developed will be

Last Answer : A 12 -pole, 440 V, 50 Hz, 3 -phase synchronous motor takes a line current of 100 A at 0.8 pf leading. Neglecting losses, the torque developed will be 1165 Nm

A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Description : A circuit is to be designed in which a capacitor must charge to 40 percent of the maximum charging voltage in 200 microseconds. The resistor to be used has a resistance of 40,000 ohms. What size capacitor must be used?

Last Answer : 0.1 microfarads 40% from the graph = 0.5

Define each of following terms of operational amplifiers i) Slew rate ii) Input offset voltage iii) Voltage gain iv) Input capacitance

Description : Define each of following terms of operational amplifiers i) Slew rate ii) Input offset voltage iii) Voltage gain iv) Input capacitance

Last Answer : i) Slew rate:- Maximum rate of change of o/p voltage per unit of time. It is express in volt/µsec.  ii) Input offset voltage:- The voltage that must be applied between two ... capacitance that can be measured at either be inverting or non-inverting terminal with other terminal connected to ground.

The capacitor charging current is

Last Answer : The capacitor charging current is An exponential growth function

If A and B are two fuzzy sets with membership functions μA(x) = {0.6, 0.5, 0.1, 0.7, 0.8} μB(x) = {0.9, 0.2, 0.6, 0.8, 0.5} Then the value of μ(A∪B)’(x) will be (A) {0.9, 0.5, 0.6, 0.8, 0.8} (B) {0.6, 0.2, 0.1, 0.7, 0.5} (C) {0.1, 0.5, 0.4, 0.2, 0.2} (D) {0.1, 0.5, 0.4, 0.2, 0.3}

Description : If A and B are two fuzzy sets with membership functions μA(x) = {0.6, 0.5, 0.1, 0.7, 0.8} μB(x) = {0.9, 0.2, 0.6, 0.8, 0.5} Then the value of μ(A∪B)’(x) will be (A) {0.9, 0.5, 0.6, 0.8, 0.8} (B) {0.6, 0.2, 0.1, 0.7, 0.5} (C) {0.1, 0.5, 0.4, 0.2, 0.2} (D) {0.1, 0.5, 0.4, 0.2, 0.3}

Last Answer : (C) {0.1, 0.5, 0.4, 0.2, 0.2}

Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB(x))) Then, f(A+B) is equal to (A) {(0.5,12), (0.6,13), (1,14), (0.7,15), (0.7,16), (1,17), (1,18)} (B) {(0.5,12), (0.6,13), (1,14), (1,15), (1,16), (1,17), (1,18)} (C) {(0.3,12), (0.5,13), (0.5,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Description : Compute the value of adding the following two fuzzy integers: A = {(0.3,1), (0.6,2), (1,3), (0.7,4), (0.2,5)} B = {(0.5,11), (1,12), (0.5,13)} Where fuzzy addition is defined as μA+B(z) = maxx+y=z (min(μA(x), μB( ... ,18)} (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)}

Last Answer : (D) {(0.3,12), (0.5,13), (0.6,14), (1,15), (0.7,16), (0.5,17), (0.2,18)} 

When charging a 100 amp-hour lead-acid battery, ___________. A. the temperature of the electrolyte should not be allowed to exceed 90°F B. the charging rate should be no greater than 125% of the battery amp-hour rating C. the source of power for charging should be 2.5 volts per cell D. gassing within the battery decreases when nearing full charge and it will be necessary to reduce the charging current to a low finishing rate

Description : When charging a 100 amp-hour lead-acid battery, ___________. A. the temperature of the electrolyte should not be allowed to exceed 90°F B. the charging rate should be no greater than 125% of the ... nearing full charge and it will be necessary to reduce the charging current to a low finishing rate

Last Answer : Answer: C

A synchronous motor operates at 0.8 pf lagging. If the field current of the motor is continuously

Description : A synchronous motor operates at 0.8 pf lagging. If the field current of the motor is continuously increased  1. The power factor decreases upto a certain value of field current and thereafter it increases.  2. The armature current ... the correct answer is (a) 1, 2 (b) 3, 4 (c) 1, 3 (d) 2, 4

Last Answer : A synchronous motor operates at 0.8 pf lagging. If the field current of the motor is continuously increased  1. The power factor decreases upto a certain value of field current and thereafter it increases.  2. The armature current ... the correct answer is (a) 1, 2 (b) 3, 4 (c) 1, 3 (d) 2, 4

A 200 V, 50 Hz inductive circuit takes a current of 10 A at 30 degree lagging pf, what is the inductive ...

Description : A 200 V, 50 Hz inductive circuit takes a current of 10 A at 30 degree lagging pf, what is the inductive reactance of the circuit?  (A) 17.8 Ω (B) 100 Ω (C) 178 Ω (D) 10 Ω 

Last Answer : D

What is Slew Rate ? What is the sleeve rate ?

Description : What is Slew Rate ? What is the sleeve rate ?

Last Answer : : Sluw rate is how fast the output of an Op-amp can change.

The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' factor into the circuit C. shape the linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Description : The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' ... linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Last Answer : Answer: A

What are the methods to improve slew rate?

Description : What are the methods to improve slew rate?

Last Answer : a. The slew rate can be improved with higher closed-loop gain and dc supply voltage. But the slew rate also varies with temperature. i.e., slew rate decreases with increase in temperature. b. Another ... a higher slew rate, op-amp should have either a higher current or a small value of capacitor.

How can the slew rate be made faster?

Description : How can the slew rate be made faster?

Last Answer : The slew rate can be made faster by having a high charging current or a small capacitance value.

Define slew rate?

Description : Define slew rate?

Last Answer : Slew rate can be defined as the maximum rate of change of output voltage of op-amp with respect to time.

An infinite slew rate refers to A. no time delay B. small time delay C. large time delay D. variable time delay

Description : An infinite slew rate refers to A. no time delay B. small time delay C. large time delay D. variable time delay

Last Answer : no time delay

What causes slew rate?

Description : What causes slew rate?

Last Answer : There is a capacitor with-in or outside of an op-amp to prevent oscillation. The capacitor which prevents the output voltage from responding immediately to a fast changing input.

Define slew rate.

Description : Define slew rate.

Last Answer : The slew rate is defined as the maximum rate of change of output Voltage caused by a step input voltage.An ideal slew rate is infinite which means that op-amp’s output voltage should change instantaneously in response to input step voltage.

Define : (i) CMMR ii) Slew rate

Description : Define : (i) CMMR ii) Slew rate

Last Answer : (i) CMRR:- The CMRR is defined as the ratio of the powers of the differential gain over the common-mode gain, measured in positive decibels (thus using the 20 log rule): As differential gain should ... respond to an abrupt change of input level It is measured as a voltage change in a given time.

When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output:

Description : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: (1) Has no offset (2) Approaches to triangular waveshape (3) Is pure sinusoidal (4) Is square wave 

Last Answer : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: Approaches to triangular waveshape

Slew rate is defined by:

Description : Slew rate is defined by: (1) di/dt(max) (2) dv/dt(max) (3) di/dt(min) (4) dv/dt(min) 

Last Answer : Slew rate is defined by: dv/dt(max) 

What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF,

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less than normal. B. The reading is practically zero and remains there. C. The capacitor shows no charging action, but indicates a very high resistance. D. The pointer moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Description : Which of the following conditions indicates a short circuited capacitor when checking its condition with an ohmmeter? A. The capacitor shows charging, but the final resistance reading is appreciably less ... moves quickly to the low resistance side of the scale, then slowly recedes toward infinity.

Last Answer : Answer: B

Work done in charging a capacitor is given by A. (1⁄2)QV B. 2QV C. QV D. 2V

Description : Work done in charging a capacitor is given by A. (1⁄2)QV B. 2QV C. QV D. 2V

Last Answer : (1⁄2)QV

In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : The CEMF of the inductor

In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Description : In an LC choke-input filter, what prevents the rapid charging of the capacitor?

Last Answer : Counter electro-motive force of the inductor.

What is the voltage drop across the resistor in an RC charging circuit when the charge on the capacitor is equal to the battery voltage?

Description : What is the voltage drop across the resistor in an RC charging circuit when the charge on the capacitor is equal to the battery voltage?

Last Answer : Zero.

At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Description : At what instant does the greatest voltage appear across the resistor in a series RC circuit when the capacitor is charging?

Last Answer : At the instant of the initiation of the action.

state what happens to the electrons in a capacitor circuit when (a) the capacitor is charging and (b) the capacitor is discharging.

Description : state what happens to the electrons in a capacitor circuit when (a) the capacitor is charging and (b) the capacitor is discharging.

Last Answer : a. When the capacitor is charging, electrons accumulate on the negative plate and leave the positive plate until the charge on the capacitor is equal to the battery voltage. b. When the ... the negatively charged plate to the positively charged plate until the charge on each plate is neutral.

Charging Action of capacitor

Description : Charging Action of capacitor

Last Answer : Charging Action of capacitor .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Capacitor : Before charging takes place

Description : Capacitor : Before charging takes place

Last Answer : Capacitor : Before charging takes place

Under managed floating exchange rates, if the rate of inflation in the United States is less than the rate of inflation pf its trading partners, the dollar will likely: A. Appreciate against foreign currencies B. Depreciate against foreign currencies C. Be officially revalued by the government D. Be officially devalued by the government

Description : Under managed floating exchange rates, if the rate of inflation in the United States is less than the rate of inflation pf its trading partners, the dollar will likely: A. Appreciate against ... currencies C. Be officially revalued by the government D. Be officially devalued by the government

Last Answer : A. Appreciate against foreign currencies

Gorillagate: How many of you would have none of the slew of objections regarding the matter had it been your child?

Description : Gorillagate: How many of you would have none of the slew of objections regarding the matter had it been your child?

Last Answer : I’d sue if the zoo wouldn’t let me in the cage so I could achieve closure by taking a memorial selfie of me holding my child while he gave the “sleeping” gorilla a “good night” hug.

Should I wait for Verizon to release a slew of new phones in the next two months or give in and get the enV3 right now?

Description : Should I wait for Verizon to release a slew of new phones in the next two months or give in and get the enV3 right now?

Last Answer : There’s always gonna be something better 2 months from now. The question is, does this phone do what you want it to at a price/terms you’re comfortable with. If so, then get it. And don’t look back.

Hostgator exclusive offer that delivers some of the best shared hosting features we've seen for a very slew of freebies like domain names, SSLits a bit cheaper then Ht tps://yazing.co m/deals/hostgator/getthemoney(take spaces out and click)?

Description : Hostgator exclusive offer that delivers some of the best shared hosting features we've seen for a very slew of freebies like domain names, SSLits a bit cheaper then Ht tps://yazing.co m/deals/hostgator/getthemoney(take spaces out and click)?

Last Answer : يجعل HostGator استضافة الويب غير المحدودة سهلة وبأسعار معقولة مع مساحة قرص غير محدودة وعرض النطاق الترددي ولوحة تحكم سهلة. تجعل الأسعار المنخفضة والإعداد السهل HostGator واحدة من شركات استضافة الويب الرائدة في الصناعة!2u.pw/L1LzC

Who slew the giant who had 6fingers on each hand and 6 toes on each foot?

Description : Who slew the giant who had 6fingers on each hand and 6 toes on each foot?

Last Answer : Don't know

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method

Description : At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method

Last Answer : c) Launching of girders with the help of a

A certain common-emitter amplifier has a voltage gain of 100. If the emitter bypass capacitor is removed.

Description : A certain common-emitter amplifier has a voltage gain of 100. If the emitter bypass capacitor is removed.  a. The circuit will become unstable b. The voltage gain will decrease  c. The voltage gain will increase d. The circuit will become stable

Last Answer : B

An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor

Description : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is :  (A) 100/11 (B) 11/100 (C) 110 (D) 1000

Last Answer : An inductor of Q factor 10 is connected in series with a capacitor having a Q factor of 100. The overall Q factor of the circuit is : 100/11

A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do one of the following things. Will it: w) flow in one direction, beginning at a maximum and decreasing rapidly to zero x) oscillate indefinitely y) oscillate but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency

Description : A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do ... but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency  

Last Answer : ANSWER: Y -- OSCILLATE BUT DIMINISH STEADILY TO ZERO

Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Description : Most of the plastics are safe to be used upto a maximum temperature of __________ °C. (A) 100 (B) 150 (C) 350 (D) 450

Last Answer : (B) 150

Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash flow pattern B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return. C. The sequence of +Rs.100, -Rs.1,100, and Rs.1,600 is a conventional cash flow pattern. D. The sequence of -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Description : Which of the following statements regarding cash flow patterns (for time periods 0, 1, 2, 3, and 4) is correct? A. The sequence of -Rs.100, Rs.50, Rs.40, Rs.60, and Rs.50 is a non-conventional cash ... -Rs.50, Rs.50, Rs.70, Rs.60, and -Rs.150 potentially has at most two internal rates of return.

Last Answer : B. The sequence of -Rs.100, Rs.600, -Rs.1,100, Rs.600, and Rs.20 potentially has a maximum of two internal rates of return.

The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Description : The maximum permissible chloride content in treated water of public water supplies should not exceed (A) 50 P.P.M. (B) 100 P.P.M. (C) 150 P.P.M. (D) 250 P.P.M.

Last Answer : (D) 250 P.P.M.

If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm(C) 150 cm (D) 200 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Description : To prevent segregation, the maximum height for placing concrete, is (A) 100 cm (B) 125 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option A

The maximum permissible deflection of a timber beam supporting a roof, is (A) L/100 (B) L/150 (C) L/260 (D) L/360

Description : The maximum permissible deflection of a timber beam supporting a roof, is (A) L/100 (B) L/150 (C) L/260 (D) L/360

Last Answer : Answer: Option D

A cantilever beam of span 3m carries a point load 100 N at the free end. The maximum B.M in the beam will be (a) 100 N-m (b) 300 N-m (c) 150 N-m (d) 600 N-m

Description : A cantilever beam of span 3m carries a point load 100 N at the free end. The maximum B.M in the beam will be (a) 100 N-m (b) 300 N-m (c) 150 N-m (d) 600 N-m

Last Answer : (b) 300 N-m

Maximum number of members in case of public company is: A. 50 B. 100 C. 150 D. 200

Description : Maximum number of members in case of public company is: A. 50 B. 100 C. 150 D. 200

Last Answer : D. 200