An infinite slew rate refers to A. no time delay B. small time delay C. large time delay D. variable time delay

An infinite slew rate refers to

A. no time delay

B. small time delay

C. large time delay

D. variable time delay
by

1 Answer

Answer :

no time delay
by

Related questions

If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Description : If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Last Answer : large

What is Slew Rate ? What is the sleeve rate ?

Description : What is Slew Rate ? What is the sleeve rate ?

Last Answer : : Sluw rate is how fast the output of an Op-amp can change.

The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' factor into the circuit C. shape the linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Description : The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' ... linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Last Answer : Answer: A

What are the methods to improve slew rate?

Description : What are the methods to improve slew rate?

Last Answer : a. The slew rate can be improved with higher closed-loop gain and dc supply voltage. But the slew rate also varies with temperature. i.e., slew rate decreases with increase in temperature. b. Another ... a higher slew rate, op-amp should have either a higher current or a small value of capacitor.

How can the slew rate be made faster?

Description : How can the slew rate be made faster?

Last Answer : The slew rate can be made faster by having a high charging current or a small capacitance value.

Define slew rate?

Description : Define slew rate?

Last Answer : Slew rate can be defined as the maximum rate of change of output voltage of op-amp with respect to time.

What causes slew rate?

Description : What causes slew rate?

Last Answer : There is a capacitor with-in or outside of an op-amp to prevent oscillation. The capacitor which prevents the output voltage from responding immediately to a fast changing input.

Define slew rate.

Description : Define slew rate.

Last Answer : The slew rate is defined as the maximum rate of change of output Voltage caused by a step input voltage.An ideal slew rate is infinite which means that op-amp’s output voltage should change instantaneously in response to input step voltage.

Define : (i) CMMR ii) Slew rate

Description : Define : (i) CMMR ii) Slew rate

Last Answer : (i) CMRR:- The CMRR is defined as the ratio of the powers of the differential gain over the common-mode gain, measured in positive decibels (thus using the 20 log rule): As differential gain should ... respond to an abrupt change of input level It is measured as a voltage change in a given time.

Define each of following terms of operational amplifiers i) Slew rate ii) Input offset voltage iii) Voltage gain iv) Input capacitance

Description : Define each of following terms of operational amplifiers i) Slew rate ii) Input offset voltage iii) Voltage gain iv) Input capacitance

Last Answer : i) Slew rate:- Maximum rate of change of o/p voltage per unit of time. It is express in volt/µsec.  ii) Input offset voltage:- The voltage that must be applied between two ... capacitance that can be measured at either be inverting or non-inverting terminal with other terminal connected to ground.

When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output:

Description : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: (1) Has no offset (2) Approaches to triangular waveshape (3) Is pure sinusoidal (4) Is square wave 

Last Answer : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: Approaches to triangular waveshape

Slew rate is defined by:

Description : Slew rate is defined by: (1) di/dt(max) (2) dv/dt(max) (3) di/dt(min) (4) dv/dt(min) 

Last Answer : Slew rate is defined by: dv/dt(max) 

A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ?

Description : A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ? (A) 1.5 V/μs (B) 1.05 V/μs (C) 0.15mV/s (D) 10.5 mV/s

Last Answer : A 100 pF capacitor has a maximum charging current of 150 μA.What is the slew rate ? (A) 1.5 V/μs (B) 1.05 V/μs (C) 0.15mV/s (D) 10.5 mV/s

An OP amp has a slew rate of 1V/µs. At a signal frequency of 0.1 MHz, the maximum undistorted sine wave ...

Description : An OP amp has a slew rate of 1V/µs. At a signal frequency of 0.1 MHz, the maximum undistorted sine wave amplitude is (a) 8V (b) 4.82 V (c) 2.02 V (d) 1.592 V

Last Answer : Slew rate = 2πfv where v is the amplitude V=(1/2π*0.1) = 1.592V

In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Description : In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Last Answer : d.infinite

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

Computers that control processes accept data in a continuous a) data traffic pattern b) data highway c) infinite loop d) feedback loop e) None of these 44. What refers to a

Description : Computers that control processes accept data in a continuous a) data traffic pattern b) data highway c) infinite loop d) feedback loop e) None of these 44. What refers to a

Last Answer : c) infinite loop

Gorillagate: How many of you would have none of the slew of objections regarding the matter had it been your child?

Description : Gorillagate: How many of you would have none of the slew of objections regarding the matter had it been your child?

Last Answer : I’d sue if the zoo wouldn’t let me in the cage so I could achieve closure by taking a memorial selfie of me holding my child while he gave the “sleeping” gorilla a “good night” hug.

Should I wait for Verizon to release a slew of new phones in the next two months or give in and get the enV3 right now?

Description : Should I wait for Verizon to release a slew of new phones in the next two months or give in and get the enV3 right now?

Last Answer : There’s always gonna be something better 2 months from now. The question is, does this phone do what you want it to at a price/terms you’re comfortable with. If so, then get it. And don’t look back.

Hostgator exclusive offer that delivers some of the best shared hosting features we've seen for a very slew of freebies like domain names, SSLits a bit cheaper then Ht tps://yazing.co m/deals/hostgator/getthemoney(take spaces out and click)?

Description : Hostgator exclusive offer that delivers some of the best shared hosting features we've seen for a very slew of freebies like domain names, SSLits a bit cheaper then Ht tps://yazing.co m/deals/hostgator/getthemoney(take spaces out and click)?

Last Answer : يجعل HostGator استضافة الويب غير المحدودة سهلة وبأسعار معقولة مع مساحة قرص غير محدودة وعرض النطاق الترددي ولوحة تحكم سهلة. تجعل الأسعار المنخفضة والإعداد السهل HostGator واحدة من شركات استضافة الويب الرائدة في الصناعة!2u.pw/L1LzC

Who slew the giant who had 6fingers on each hand and 6 toes on each foot?

Description : Who slew the giant who had 6fingers on each hand and 6 toes on each foot?

Last Answer : Don't know

At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method

Description : At locations where access to the new bridge construction is available by rail, the launching of girders upto 18.3 m which method is ideal. a) slew in slew out method b) gantry method c) Launching of girders with the help of a BFR*: d) Pantoon method

Last Answer : c) Launching of girders with the help of a

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Description : High aniline point of diesel indicates that, it (A) Is highly aromatic (B) Has a large ignition delay (C) Is highly paraffinic (D) Has a low diesel index

Last Answer : (C) Is highly paraffinic

In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load,

Description : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is (A) sinusoidal current (B) constant dc current (C) continuous rectangular pulses (D) alternating rectangular pulses

Last Answer : In a 230 V, 50 Hz single-phase SCR bridge converter operating at a firing delay angle, α and with large R-L load, the input source current is alternating rectangular pulses

Refers to an effect of selective fading. A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. B. A fading effect caused by small changes in beam heading at the receiving station. C. A fading effect caused by the time differences between the receiving and transmitting stations. D. A fading effect caused by large changes in the height of the ionosphere, as experienced at the receiving station.

Description : Refers to an effect of selective fading. A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station. B. A fading ... caused by large changes in the height of the ionosphere, as experienced at the receiving station.

Last Answer : A. A fading effect caused by phase differences between radio wave components of the same transmission, as experienced at the receiving station.

Though local search algorithms are not systematic, key advantages would include __________ a) Less memory b) More time c) Finds a solution in large infinite space d) Less memory & Finds a solution in large infinite space

Description : Though local search algorithms are not systematic, key advantages would include __________ a) Less memory b) More time c) Finds a solution in large infinite space d) Less memory & Finds a solution in large infinite space

Last Answer : d) Less memory & Finds a solution in large infinite space

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Last Answer : d.finite elements

The process of representing a large—possibly infinite—set of values with a much smaller set is called______________. A. Linear function Quantization B. PDF. C. CDF D. Quantization

Description : The process of representing a large—possibly infinite—set of values with a much smaller set is called______________. A. Linear function Quantization B. PDF. C. CDF D. Quantization

Last Answer : D. Quantization

A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals

Description : A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals. Assuming the prime mover input and the voltage behind the transient reactance to remain constant immediately after the fault, acceleration of the generator rotor is

Last Answer : A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals. Assuming the prime mover input and the voltage behind the transient reactance ... , acceleration of the generator rotor is inversely proportional to the moment of inertia of the machine

Which of the following refers to any systematic change that occurs over time in the way in which the dependent variable is assessed? a. Instrumentation b. Maturation c. Testing d. Selection

Description : Which of the following refers to any systematic change that occurs over time in the way in which the dependent variable is assessed? a. Instrumentation b. Maturation c. Testing d. Selection

Last Answer : a. Instrumentation

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

The weight of a body at the centre of earth is: (1) half the weight at the surface (2) zero (3) twice the weight at the surface (4) infinite

Description : The weight of a body at the centre of earth is: (1) half the weight at the surface (2) zero (3) twice the weight at the surface (4) infinite

Last Answer : (2) zero Explanation: Weight of a body is the force with which it is attracted towards the centre of earth. The weight of a body, 'w' of mass `m' is given by: W = mg, where `g is the acceleration due ... of earth, value of 'g' is zero. Therefore, weight of a body is zero at the centre of the earth.

When a detergent is added to pure water, its surface tension – (1) increases (2) decreases (3) remains constant (4) becomes infinite

Description : When a detergent is added to pure water, its surface tension – (1) increases (2) decreases (3) remains constant (4) becomes infinite

Last Answer : (2) decreases Explanation: When Soaps and detergents are added to water, they weaken the strength of the skin on the water's surface due to surface tension by interfering with hydrogen bonding ... of the soap or detergent is also attracted to the water, thereby decreasing the surface tension.

When a person sitting on a swing stands up on the swing, the frequency of oscillation – (1) decreases (2) increases (3) becomes infinite (4) does not change

Description : When a person sitting on a swing stands up on the swing, the frequency of oscillation – (1) decreases (2) increases (3) becomes infinite (4) does not change

Last Answer : (2) increases Explanation: In Simple Harmonic Motion, the frequency of the oscillation (1) is the number of oscillations per second which is expressed as f = 1/T where T is the time period (the time for the oscillator to complete one cycle).

Momentum of two objects moving with same speed but in opposite direction upon collision is A. increased B. decreased C. is zero D. is infinite

Description : Momentum of two objects moving with same speed but in opposite direction upon collision is A. increased B. decreased C. is zero D. is infinite

Last Answer : is zero

Ideal resistance of ammeter is A. 1 Ω B. 2 ΩC. 0 ΩD. infinite

Description : Ideal resistance of ammeter is A. 1 Ω B. 2 Ω C. 0 Ω D. infinite

Last Answer : 0 Ω

As compared to the volume occupied by gas, the volume of particles is A. more B. infinite C. negligible D. less than the volume of gas

Description : As compared to the volume occupied by gas, the volume of particles is A. more B. infinite C. negligible D. less than the volume of gas

Last Answer : negligible

Gravitational potential is always A. infinite B. zero C. positive D. negative

Description : Gravitational potential is always A. infinite B. zero C. positive D. negative

Last Answer : negative

Mass of satellite orbiting Earth is A. considered B. irrelevant C. should be infinite D. should be zero

Description :  Mass of satellite orbiting Earth is A. considered B. irrelevant C. should be infinite D. should be zero

Last Answer : should be infinite

As long as op-amp is not saturated, the potential difference between inverting and non-inverting inputs is A. zero B. infinite C. 1 D. 2

Description : As long as op-amp is not saturated, the potential difference between inverting and non-inverting inputs is A. zero B. infinite C. 1 D. 2

Last Answer : zero

Impedance of ideal op-amp is A. zero B. 1 C. infinite D. 2

Description : Impedance of ideal op-amp is A. zero B. 1 C. infinite D. 2

Last Answer :  infinite

At all the points the uniform fields have A. different strength B. same strength C. zero strength D. infinite strength

Description : At all the points the uniform fields have A. different strength B. same strength C. zero strength D. infinite strength

Last Answer : same strength

Bit on left hand side has A. lowest value B. zero value C. highest value D. infinite value

Description : Bit on left hand side has A. lowest value B. zero value C. highest value D. infinite value

Last Answer : highest value

If frequency of modulated wave is less than frequency of carrier wave, then input signal is A. negative B. positive C. zero D. infinite

Description : If frequency of modulated wave is less than frequency of carrier wave, then input signal is A. negative B. positive C. zero D. infinite

Last Answer : negative

Speed is unchanged because work done on an object is A. zero B. positive C. negative D. infinite

Description : Speed is unchanged because work done on an object is A. zero B. positive C. negative D. infinite

Last Answer : zero

When current is parallel to magnetic fields, force on conductor is A. zeroB. infinite C. 2 times D. same

Description : When current is parallel to magnetic fields, force on conductor is A. zeroB. infinite C. 2 times D. same

Last Answer : zero

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

If the plates of capacitor are oppositely charged then the total charge is equal to A. negative B. positive C. zero D. infinite

Description : If the plates of capacitor are oppositely charged then the total charge is equal to A. negative B. positive C. zero D. infinite

Last Answer : zero

If charge is placed at infinity, it's potential is A. zero B. infinite C. 1 D. -1

Description : If charge is placed at infinity, it's potential is A. zero B. infinite C. 1 D. -1

Last Answer : zero