Can you come up with a test to tell if three numbers go clockwise around a clock?

Can you come up with a test to tell if three numbers go clockwise around a clock?
by

1 Answer

Answer :

You can always get from one number to the next moving clockwise, it would just take between 30 and 330 degrees of rotation.
by

Related questions

Which clock will you forget to set back an hour Saturday night?

Description : Which clock will you forget to set back an hour Saturday night?

Last Answer : Other than my laptop…all of them. Fuck the time change….as if we can really control nature. Pfft!

Know of a great alarm clock?

Description : Know of a great alarm clock?

Last Answer : If it's not annoying it sounds like its not going to get you up. I use my cell phone alarm personally...but I guess you need something with a combination or something that would prevent you from easily turning it off. I don;t know what to tell ya except maybe try going to bed earlier lol.

What interesting titbit have you learned recently?

Description : What interesting titbit have you learned recently?

Last Answer : That guacamole was made from avocadoes. Still working on what a non-sequitor means. What pro-rating is.

Are you going to have to travel through your home changing time on clocks, or do your clocks change themselves without you even having to worry?

Description : Are you going to have to travel through your home changing time on clocks, or do your clocks change themselves without you even having to worry?

Last Answer : Microwave will need to be changed and that is about it. Our stove is from the 70’s and doesn’t have a clock. Computers and iPads and phones will take care of it on their own. Everyone just uses their phone as the alarm clock now.

When does mountain standard time move back a hour and ahead?

Description : When does mountain standard time move back a hour and ahead?

Last Answer : answer:“fall back” next Sunday, November 2, at 2 A.M. “spring forward” next March

What are the size ratio's of this simple mechanism?

Description : What are the size ratio's of this simple mechanism?

Last Answer : answer:Because you don’t define the size of the smallest gear, you can’t determine the size of the transfer gear. That is, you need the transfer gear to make the two hands spin the same direction. So the transfer gear could be any size.

4. Why did devotees walk around the stupa in a clockwise direction? -Social Science

Description : 4. Why did devotees walk around the stupa in a clockwise direction? -Social Science

Last Answer : They did so to show their devotion.

Which on of the following planets orbits around the sun in a clockwise direction? A. Earth B. Mercury C. Jupiter D. Venus (Answer)

Description : Which on of the following planets orbits around the sun in a clockwise direction? A. Earth B. Mercury C. Jupiter D. Venus (Answer)

Last Answer : D. Venus (Answer)

A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Description : A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Last Answer : Radius = 70m, So circumference = 2 (22/7) 70 =440m Relative speed = 10 +20 = 30m/s They will meet everytime at the starting point when the distance covered by both put together is a multiple of 440 ... =1800/44 =40.9 So they will meet 40 times (we need to ignore the decimal part). Answer : b

A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s.How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Description : A,B are start walking around a Circular park of radius 70m. They start at the same point, and A goes clockwise at 10m/s, while b goes anti-clockwise at 20m/s. How many times will they cross each other at the starting point if they walk for 30 minutes? a) 20 b) 40 c) 60 d) 80 e) None of the above

Last Answer : Radius = 70m, So circumference = 2 (22/7) 70 =440m Relative speed = 10 +20 = 30m/s They will meet everytime at the starting point when the distance covered by both put together is a multiple of 440 ... =1800/44 =40.9 So they will meet 40 times (we need to ignore the decimal part). Answer : b

The air around a high pressure area circulates: w) clockwise in the Northern Hemisphere x) counterclockwise in the Northern Hemisphere y) clockwise in the Southern Hemisphere z) in either direction regardless of hemisphere

Description : The air around a high pressure area circulates: w) clockwise in the Northern Hemisphere x) counterclockwise in the Northern Hemisphere y) clockwise in the Southern Hemisphere z) in either direction regardless of hemisphere

Last Answer : ANSWER: W -- CLOCKWISE IN THE NORTHERN HEMISPHERE 

I've never been a big NASCAR or racing fan and I don't know much about the sport of racing so I was wondering if someone could tell me why they race counter-clockwise instead of clockwise on oval tracks?

Description : I've never been a big NASCAR or racing fan and I don't know much about the sport of racing so I was wondering if someone could tell me why they race counter-clockwise instead of clockwise on oval tracks?

Last Answer : Maybe because it’s easier to go left at high speed?

In the Argand plane, the vector z = 4 - 3i is turned in the clockwise sense through 180^@` and stretched three times. The complex number represented n

Description : In the Argand plane, the vector z = 4 - 3i is turned in the clockwise sense through 180^@` and stretched three times. The complex number represented n

Last Answer : In the Argand plane, the vector z = 4 - 3i is turned in the clockwise sense through 180^@` and stretched three ... `12-9i` C. `-12-9i` D. `12-9i`

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

How can you make a servomotor go clockwise or counter-clockwise or stop?

Description : How can you make a servomotor go clockwise or counter-clockwise or stop?

Last Answer : To go clockwise, send to the servo a set of pulse widths less than 1,500 microseconds. To go counter-clockwise, send to the servo a set of pulse widths greater than 1,500 microseconds. To stop, send to the servo a set of pulse widths equal to 1,500 microseconds.

Why do clocks rotate in a "Clockwise" direction?

Description : Why do clocks rotate in a "Clockwise" direction?

Last Answer : Because that is the direction that the shadow on sun dials moved, at least on the northern hemisphere. That is my guess.

How long before the phrases clockwise and counterclockwise will disappear?

Description : How long before the phrases clockwise and counterclockwise will disappear?

Last Answer : Analog clocks and watches are still in common enough use, that I think the terms will persevere-especially given the fact that they are used as references for other activities (such as the diagrams listing ... grandchildren that are fairly young, don't you? Aren't kids still taught how to tell time?

Why, in baseball, do we run the bases counter-clockwise?

Description : Why, in baseball, do we run the bases counter-clockwise?

Last Answer : I guess, cause most people are right handed and bat like that, thus it would be natural to run in that direction?

Why can't I make clockwise circles with my right foot whilst drawing a number 6 in the air with my right hand?

Description : Why can't I make clockwise circles with my right foot whilst drawing a number 6 in the air with my right hand?

Last Answer : I couldn’t do that either! Very strange!!

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Description : G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Last Answer : b.Rapid Travel Positioning

In a CNC program block, N02 GO2 G91 X40 Z40……, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular interpolation in counter clockwise direction and absolute dimension c.circular interpolation in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Last Answer : c.circular interpolation in clockwise direction and incremental dimension

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

Last Answer : a.circular Interpolation – clockwise

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Description : 1. Consider a circular loop of wire lying in the plane of the table. Let the current pass through the loop clockwise. Apply the right-hand rule to find out the direction of the magnetic field inside and outside the loop. -Physics-10

Last Answer : Solution: For the downward direction of the current, the direction of the magnetic field will be as if emerging from the table outside the loop and merging with the table inside the loop. Similarly, ... the table outside the loop and merging with the table inside the loop, as shown in the figure.

What causes the water going down a drain to swirl clockwise in the northern hemisphere and counter-clockwise in the southern hemisphere? -Geography

Description : What causes the water going down a drain to swirl clockwise in the northern hemisphere and counter-clockwise in the southern hemisphere? -Geography

Last Answer : answer:

Is cyclosis clockwise? -Biology

Description : Is cyclosis clockwise? -Biology

Last Answer : answer:

Is cyclosis clockwise? -Biology

Description : Is cyclosis clockwise? -Biology

Last Answer : answer:

What is counter clockwise left or right?

Description : What is counter clockwise left or right?

Last Answer : To the left for counter clockwise

What is the expression for 270 clockwise?

Description : What is the expression for 270 clockwise?

Last Answer : It is the binary function: f(x, y) = (y, -x)

What is the algibraicexpression for 180 degrees clockwise?

Description : What is the algibraicexpression for 180 degrees clockwise?

Last Answer : It is the binary function: f(x, y) = (-x, -y)

Should you stir mincemeat clockwise or counterclockwise?

Description : Should you stir mincemeat clockwise or counterclockwise?

Last Answer : Clockwise for good luck.

If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Description : If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Last Answer : A simple enough question, but complicated by so many possible variations. For instance, place two cog wheels together so that their teeth mesh. Turn cog A clockwise and cog B will turn anticlockwise ( ... of travel (RPM) would depends on the diametres of the pulley wheels - variations once more!

What is the clockwise deflection of air in the northern hemisphere and the counter clockwise deflection of air in southern?

Description : What is the clockwise deflection of air in the northern hemisphere and the counter clockwise deflection of air in southern?

Last Answer : Feel Free to Answer

How many degrees do i turn when i move clockwise from facing NE to SE?

Description : How many degrees do i turn when i move clockwise from facing NE to SE?

Last Answer : 90 degrees

How many degrees do i turn when i move clockwise from facing NE to SE?

Description : How many degrees do i turn when i move clockwise from facing NE to SE?

Last Answer : 90 degrees

In the illustrated amplifier, the RESET potentiometer A1R2 sets the stability of the control loop by changing the reset time constant. As the potentiometer is turned clockwise _________. EL-0060 A. the gain is increased B. the stability is increased by slowing the response time C. feedback is increased to the summing point at terminal 5 D. response time is increased decreasing stability

Description : In the illustrated amplifier, the RESET potentiometer A1R2 sets the stability of the control loop by changing the reset time constant. As the potentiometer is turned clockwise _________. EL-0060 A. ... is increased to the summing point at terminal 5 D. response time is increased decreasing stability

Last Answer : Answer: B

In order to decrease the resistance of the 50K pot located at '21Q/R' shown in the illustration, the wiper of the actual component must be moved ____________. EL-0099 A. to the left B. to the right C. clockwise D. counterclockwise

Description : In order to decrease the resistance of the 50K pot located at '21Q/R' shown in the illustration, the wiper of the actual component must be moved ____________. EL-0099 A. to the left B. to the right C. clockwise D. counterclockwise

Last Answer : Answer: D

You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher than the bus frequency B. lower than the bus frequency C. the same as the bus frequency and the circuit breaker may be closed at any pointer position D. the same as the bus frequency but out of phase with it

Description : You are attempting to parallel two AC generators, and the synchroscope pointer is revolving fast in the clockwise direction. This indicates that the frequency of the incoming machine is _____________. A. higher ... at any pointer position D. the same as the bus frequency but out of phase with it

Last Answer : Answer: A

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

Description : The ________ angle measures the satellite position clockwise from the direction of true north. A. azimuth B. elevation C. depression D. critical

Last Answer : A. azimuth

In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left side of the bearing without metal to metal contact (C) The journal sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Description : In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left ... sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Last Answer : (A) The journal climbs to the right side of the bearing without metal to metal contact

Antiparallel strands of a DNA molecule means that (a) one strand turns clockwise (b) one strand turns anti-clockwise (c) the phosphate groups of two DNA strands, at their ends, share the same position (d) the phosphate groups at the start of two DNA strands are in opposite position (pole).

Description : Antiparallel strands of a DNA molecule means that (a) one strand turns clockwise (b) one strand turns anti-clockwise (c) the phosphate groups of two DNA strands, at their ends, share the same position (d) the phosphate groups at the start of two DNA strands are in opposite position (pole).

Last Answer : (d) the phosphate groups at the start of two DNA strands are in opposite position (pole).

What is cyclone-? (a) A low pressure system with clockwise winds in the northern hemisphere. (b) A high pressure system with anticlockwise winds in the northern hemisphere. (c) A low pressure system with anticlockwise winds in the northern hemisphere. (d) A high pressure system with clockwise winds in the northern hemisphere.

Description : What is cyclone-? (a) A low pressure system with clockwise winds in the northern hemisphere. (b) A high pressure system with anticlockwise winds in the northern hemisphere. (c) A low pressure ... in the northern hemisphere. (d) A high pressure system with clockwise winds in the northern hemisphere.

Last Answer : (c) A low pressure system with anticlockwise winds in the northern hemisphere.

All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Description : All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Last Answer : in a direction that cannot be predicted but must be determined experimentally

The included angles of a theodolite traverse, are generally measured (A) Clockwise from the forward station (B) Anti-clockwise from the back station (C) Anti-clockwise from the forward station (D) Clockwise from the back station

Description : The included angles of a theodolite traverse, are generally measured (A) Clockwise from the forward station (B) Anti-clockwise from the back station (C) Anti-clockwise from the forward station (D) Clockwise from the back station

Last Answer : (D) Clockwise from the back station

The bearing of line AB is 152° 30' and angle ABC measured clockwise is 124° 28'. The bearing of BC is (A) 27° 52' (B) 96° 58' (C) 148° 08' (D) 186° 58'

Description : The bearing of line AB is 152° 30' and angle ABC measured clockwise is 124° 28'. The bearing of BC is (A) 27° 52' (B) 96° 58' (C) 148° 08' (D) 186° 58'

Last Answer : (B) 96° 58'

Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Description : Reduced bearing of a line is an angle between (A) North line and given line measured clockwise (B) North line and given line measured anticlockwise (C) East or west and the given line (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Last Answer : (D) Given line and the part of the meridian whether N end or S end, lying adjacent to it

Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Description : Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is provided through (A) Shoulder swivel (B) Elbow extension (C) Arm sweep (D) Wrist bend

Last Answer : C