During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed

During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed
by

1 Answer

Answer :

a.circular Interpolation – clockwise
by

Related questions

In a CNC program block, N02 GO2 G91 X40 Z40……, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular interpolation in counter clockwise direction and absolute dimension c.circular interpolation in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension

Last Answer : c.circular interpolation in clockwise direction and incremental dimension

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Description : In CNC Program M03 is refer to…… a.Spindle ON in Clockwise rotation b.Spindle ON in Counter Clockwise rotation c.Spindle OFF in Clockwise rotation d.Spindle OFF in Counter Clockwise rotation

Last Answer : a.Spindle ON in Clockwise rotation

G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Description : G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation

Last Answer : b.Rapid Travel Positioning

In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving

Last Answer : c.Thread Cutting

In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed

Last Answer : b.Pitch

n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion are a.N010 GO3 X7.0 Y2.0 I5.0 J2.0 b.N010 GO2 X7.0 Y2.0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Description : n an NC machining operation, the tool has to be moved from point (5, 4) to point (7, 2) alonga circular path with centre at (5, 2). Before starting the operation, the tool is at (5, 4). The G and N codes for this motion ... 0 I5.0 J2.0 c.N010 GO1 X7.0 Y2.0 I5.0 J2.0 d.N010 GOO X7.0 Y2.0 I5.0 J2.0

Last Answer : b.N010 GO2 X7.0 Y2.0 I5.0 J2.0

……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Description : ……… is a group of words or coded instruction for the NC/CNC system to execute aparticular movement. a.Sequence b.Address c.Code d.Block

Last Answer : d.Block

In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Description : In CNC Program M98 is refer to…… a.CANCEL Subroutine b.Call Sub-Program c.Call Subroutine d.CANCEL Sub-Program

Last Answer : b.Call Sub-Program

In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Description : In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74

Last Answer : d.G74

Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above

Last Answer : c.Canned Cycle

The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Description : The lost motion in CNC machine tool is on account of a.Backlash in gearing b.Wind-up of drive shafts c.Deflection of machine tool members d.All the above

Last Answer : a.Backlash in gearing

Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1

Description : Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1

Last Answer : c.P-3, Q-4, R-2, S-1

Incremental dimension in circular interpolation in X-axis is denoted by a.J b.I c.K d.None of the above

Description : Incremental dimension in circular interpolation in X-axis is denoted by a.J b.I c.K d.None of the above

Last Answer : b.I

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Description : Automatic tool change in CNC Machine code a.M05 b.M06 c.M07 d.M09

Last Answer : b.M06

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Description : In how many ways CNC machine tool systems can be classified? a.2 b.3 c.4 d.5

Last Answer : b.3

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Last Answer : a.helicoidal

……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Description : ……… is the origin of the coordinate system which is defined by manufacturer they cannotbe changed a.Blocking Point b.machine Zero Point c.Start Point d.Program Zero point

Last Answer : b.machine Zero Point

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Description : In the CNC machine which device used to hold the workpiece? a.Automatic pallet changer b.Automatic work part positioner c.A & B both d.None of the above

Last Answer : c.A & B both

For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.

Description : For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

Which type of motion is possible in jointed arm robots a.3 linear and 1 rotational motion b.3 rotational motion c.3 linear motion d.2 linear and 1 rotational motion

Description : Which type of motion is possible in jointed arm robots a.3 linear and 1 rotational motion b.3 rotational motion c.3 linear motion d.2 linear and 1 rotational motion

Last Answer : b.3 rotational motion

Which type of motion is possible in polar coordinate robots? a.2 linear and 1 rotational motion b.3 linear motion c.3 rotational motion d.2 rotational and 1 linear motion

Description : Which type of motion is possible in polar coordinate robots? a.2 linear and 1 rotational motion b.3 linear motion c.3 rotational motion d.2 rotational and 1 linear motion

Last Answer : d.2 rotational and 1 linear motion

Which type of motion is possible in cylindrical coordinate robots? a.3 rotational motion b.3 linear and 1 rotational motion c.2 linear and 1 rotational motion d.3 linear motion

Description : Which type of motion is possible in cylindrical coordinate robots? a.3 rotational motion b.3 linear and 1 rotational motion c.2 linear and 1 rotational motion d.3 linear motion

Last Answer : c.2 linear and 1 rotational motion

Which type of motion is possible in Cartesian coordinate robots? a.3 linear motion b.2 linear and 1 rotational motion c.3 rotational motion d.1 linear and 1 rotational motion

Description : Which type of motion is possible in Cartesian coordinate robots? a.3 linear motion b.2 linear and 1 rotational motion c.3 rotational motion d.1 linear and 1 rotational motion

Last Answer : a.3 linear motion

he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Description : he depth that the tool is plunged into the surface is called as a.feed b.depth of cut c.depth of tool d.working depth

Last Answer : b.depth of cut

In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational – Material – Size – Shape b.Material – Rotational or non rotational – Size – Shape c.Size – Rotational or non rotational – Material – Shape d.Shape – Rotational or non rotational – Material – Size

Description : In a simple and visual method of Cell design, the priorities in classifying may be in the order a.Rotational or non rotational †Material †Size †Shape b.Material †Rotational or non ... non rotational †Material †Shape d.Shape †Rotational or non rotational †Material †Size

Last Answer : a.Rotational or non rotational – Material – Size – Shape

In STL files Euler’s rule for solids can be written as a.No. of faces – No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces – No. of edges + No. of vertices = No. of bodies c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies d.No. of faces – No. of edges + No. of vertices = 4 x No. of bodies

Description : In STL files Euler’s rule for solids can be written as a.No. of faces †No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces †No. of edges + No. of vertices = No. of bodies c.No. of ... = 2 x No. of bodies d.No. of faces †No. of edges + No. of vertices = 4 x No. of bodies

Last Answer : c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies

Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Description : Full form of MCU is………… a.Machine computer unit b.Machine control universal c.Machine control unit d.None of the above

Last Answer : c.Machine control unit

……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Description : ……… are also called as parametric subroutines a.Micro b.Macro c.Sub Macro d.Sub Micro

Last Answer : b.Macro

Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Description : Each coded instruction in a set of instructions is called as…… a.Words b.Alphabet c.Numbers d.Format

Last Answer : a.Words

he linking of computer with a communication system is called……….. a.networking b.pairing c.interlocking d.assembling

Description : he linking of computer with a communication system is called……….. a.networking b.pairing c.interlocking d.assembling

Last Answer : a.networking

Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Description : Rotation about Z-axis is called…………. a.a-axis b.b-axis c.c-axis d.none of the mentioned

Last Answer : c.c-axis

Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Description : Example for one – Dimensional element is . a.triangular element b.brick element c.truss element d.axisymmetric element

Last Answer : c.truss element

To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Last Answer : b.Hermite Cubic Spline Curve

To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Last Answer : b.Hermite Cubic Spline Curve

An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Description : An area on a display device to which a window is mapped is called a…………. a.Window b.Viewpoint c.Pixel d.None of the above

Last Answer : b.Viewpoint

The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Description : The polygons are scaled by applying the following transformation. a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy) b.X’=x * Sx + Xf(1+Sx) & Y’=y * Sy + Yf(1+Sy c.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy – Yf(1-Sy) d.X’=x * Sx * Xf(1-Sx) & Y’=y * Sy * Yf(1-Sy)

Last Answer : a.X’=x * Sx + Xf(1-Sx) & Y’=y * Sy + Yf(1-Sy)

If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Description : If the scaling factors values sx and sy are assigned to the same value then……… a.Uniform rotation is produced b.Uniform scaling is produced c.Scaling cannot be done d.Scaling can be done or cannot be done

Last Answer : b.Uniform scaling is produced

We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Description : We control the location of a scaled object by choosing the position is knownas……………………………. a.Pivot point b.Fixed point c.Differential scaling d.Uniform scaling

Last Answer : b.Fixed point

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Circular motion along an axis is known as ____ in robotics. a.Pitch b.Roll c.Yaw d.None of the above

Description : Circular motion along an axis is known as ____ in robotics. a.Pitch b.Roll c.Yaw d.None of the above

Last Answer : b.Roll

Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Description : Which one of the process is subtractive prototyping? a.5 axis CNC Milling b.Fused Deposition Modeling c.Multi-Jet Modeling d.Stereolithography Apparatus

Last Answer : a.5 axis CNC Milling