Apart from renewing bearings is there any reason for opening up motors for maintenance?

Apart from renewing bearings is there any reason for opening up motors for maintenance?
by

1 Answer

Answer :

Ask E/O. Insulation checks and renewal (example using insulation spray on stator winding insulation).
by

Related questions

When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Description : When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Last Answer : Answer: D

Why is 440 V used for motors and 110/220 V used for lighting?

Description : Why is 440 V used for motors and 110/220 V used for lighting?

Last Answer : Motor load currents are large. Motors are 3-phase loads. A higher 440V voltage means lesser current for the same power and hence losses and size of cable wires is lower. Lighting is single phase ... small, hence lower voltage means less insulation in the cable wires. Ask E/O for more information

A charge of 10μC and 14.4 μC are 12 cm apart, the force between them is: (a) 9 × 105 N (b) 9 × 107 N (c) 90 N (d) 108 × 107 N

Description : A charge of 10μC and 14.4 μC are 12 cm apart, the force between them is: (a) 9 × 105 N (b) 9 × 107 N (c) 90 N (d) 108 × 107 N

Last Answer : (c) 90 N

What safety precautions need to be taken during maintenance on batteries?

Description : What safety precautions need to be taken during maintenance on batteries?

Last Answer : The room needs to be ventilated to prevent explosions due to gases generate by the battery. Protective clothing, gloves and eye protection should be used to prevent acid splash ... flashover. When disconnecting batteries, always disconnect negative terminals first and vice versa when reconnecting.

What is the regular maintenance done on batteries?

Description : What is the regular maintenance done on batteries?

Last Answer : Every week the cell voltage is checked. The specific gravity is monitored using the battery hydrometer. The terminals are lubricated to prevent corrosion. Sometimes load tests are done on the batteries. Ask E/O also for more information.

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List –I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine engines D. Ball bearing 4. Swivelling chairs A B C D A B C D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Description : Match List -I (Bearings) with List-II (Applications) and select the using the codes given below the lists: [IAS-1998] List -I List-II A. Journal bearing 1. Electric motors B. Thrust bearing 2. Watches C. Conical pivot bearing 3. Marine ... D (a) 3 4 1 2 (b) 4 2 1 3 (c) 3 4 2 1 (d) 4 2 3 1

Last Answer : (c) 3 4 2 1

. In gear boxes and small size motors, rolling contact bearings are used. a) True b) False

Description : . In gear boxes and small size motors, rolling contact bearings are used. a) True b) False

Last Answer : a) True

What are the types of bearings are adopted for small motors and large motors?

Description : What are the types of bearings are adopted for small motors and large motors?

Last Answer : Small motors (LT motors) Horizontal mounted - deep groove ball bearing at both ends. Medium motors Roller bearing at DE and deep groove bearing at NDE. Large motors (HT motors above 750 kW) Horizontal ... mounted - face to face angular contact ball bearing at NDE and roller or ball bearing at DE.

The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Description : The ball bearings are provided with a cage (a) to reduce friction (b) to facilitate slipping of balls (c) to prevent the lubricant from flowing out (d) to maintain the balls at a fixed distance apart

Last Answer : (d) to maintain the balls at a fixed distance apart

To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: C

To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. wrapped in several layers of heavy paper or cardboard C. supported by flat wood blocks on the workbench D. returned to the frame as soon as the bearings are removed

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. wrapped in several layers of heavy ... flat wood blocks on the workbench D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: B

An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. offer infinite speed variation D. all of the above

Last Answer : Answer: C

In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine oil for the first four hours of operation C. baking the armature in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Description : In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine ... in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Last Answer : Answer: A

All of the following items can be used in the maintenance of a D.C. propulsion motor's commutator EXCEPT _______________. A. a canvas wiper B. safety solvent C. abrasive dressing stones D. sandpaper

Description : All of the following items can be used in the maintenance of a D.C. propulsion motor's commutator EXCEPT _______________. A. a canvas wiper B. safety solvent C. abrasive dressing stones D. sandpaper

Last Answer : Answer: B

Routine A.C. motor maintenance should include periodic ______________. A. thermometer readings at normal loads to detect abnormal temperature rises B. inspection of the motor's internals for loose rotor bars or field poles C. bearing replacement each year using sealed units if available D. all of the above

Description : Routine A.C. motor maintenance should include periodic ______________. A. thermometer readings at normal loads to detect abnormal temperature rises B. inspection of the motor's internals for loose rotor bars ... C. bearing replacement each year using sealed units if available D. all of the above

Last Answer : Answer: A

Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Description : Complete maintenance of electrical motors should include periodic checks for machine _____________. A. vibration B. watertight integrity C. speed droop D. reactive power

Last Answer : Answer: A

An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. can be started across the line D. offer a more effective means of controlling speed

Description : An advantage of DC motors over AC motors is that they _____________. A. are less expensive B. require less maintenance C. can be started across the line D. offer a more effective means of controlling speed

Last Answer : Answer: D

One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Description : One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Last Answer : d. To prevent reradiation of the local oscillator

Which functions of the General Assembly tends to fulfill the ideals of UN Charter apart from maintenance of peace? -SST 10th

Description : Which functions of the General Assembly tends to fulfill the ideals of UN Charter apart from maintenance of peace? -SST 10th

Last Answer : The General Assembly makes recommendations for the purpose of promoting international cooperation and encouraging the development of international law arid its modification. The General Assembly also assists ... fundamental freedom for all without distinction of race, sex, language and religion.

Renewing wedding vows: Why?

Description : Renewing wedding vows: Why?

Last Answer : It’s a kind of renewal and celebration.

Will an unpaid red light ticket prevent me from renewing my tag?

Description : Will an unpaid red light ticket prevent me from renewing my tag?

Last Answer : Depends on your state; some will require you to pay it when you renew the tag, others have separate systems for traffic tickets and taxes/licensing receipts. You need to call your county clerks office and ask them.

Renewing the marriage vow?

Description : I have often seen in foreign films that the couple, after some years (and overcome partner crises), will hold a ceremony called the renewal of the marriage vows. Is there such a ceremony in ... similar in our conditions when the original ceremony was "civil" under totalitarianism, ie at the office?

Last Answer : HA, so this is the first time I've heard that something like this exists. Now I googled it and found exhaustive information quite easily. However, it does not concern me, I am not married and I would not go to any recovery with my exotic. Good question, it broadened my horizons. :)

What are the benefits of renewing a DMV registration for 2 years rather than 1?

Description : What are the benefits of renewing a DMV registration for 2 years rather than 1?

Last Answer : There is a difference for each state when there is a renewal of the registration of your vehicle. A lower rate of payment will be done the second year if payment is done in the state of Washington.

What are the benefits of renewing DMV registration for 2 years rather than 1?

Description : What are the benefits of renewing DMV registration for 2 years rather than 1?

Last Answer : That depends on where you live. The first item is less hassle, don't need to go through dealing with it for 2 years, but that is a minimal item Some states have fees that go along with the registration ... down to if you can afford to make the multi year payment or not and if you choose to do it.

What are the benefits of renewing the DMV registration?

Description : What are the benefits of renewing the DMV registration?

Last Answer : That depends on where you live. The first item is less hassle, don't need to go through dealing with it for 2 years, but that is a minimal item Some states have fees that go along with the registration ... down to if you can afford to make the multi year payment or not and if you choose to do it.

Is there a grace period for renewing your drivers license in Colorado?

Description : Is there a grace period for renewing your drivers license in Colorado?

Last Answer : Need answer

Renewing A Nursing License?

Description : Renewing A Nursing License?

Last Answer : Nurses are a vital part of the medical field, monitoringpatients' conditions, providing care and providing wellnesseducation. One important part of the nursing profession is to keepa license ... most common citations during inspections is expired nursinglicenses. Nurses who practice with an expired

What are the requirements for renewing a green card?

Description : What are the requirements for renewing a green card?

Last Answer : There are no requirements for renewing a green card. To renew a green card you must complete Form I-90 within six months of expiration.

How do I go about renewing my green card?

Description : How do I go about renewing my green card?

Last Answer : There is a form to complete and fill out the Form I-90. You can download the form from the US government website http://www.uscis.gov/. Or you can call them at 1 (800) 870-3676 to request a ... . If you do, you can download the proper form, fill it out and bring it to your local immigration office.

Renewing Your U.S. Passport?

Description : Renewing Your U.S. Passport?

Last Answer : U.S. passports are good for 10 years, but travelers need to start thinking about renewing them after nine years. Thatï ½s because many countries require passports to be good for at ... for the office to process your renewal application. Travelers renewing passports can submit applications by mail.

______ is the renewing of a forest by planting new trees or seeds?

Description : ______ is the renewing of a forest by planting new trees or seeds?

Last Answer : reforesting

____________ refer to renewing or changing components like increasing the main memory, or hard disk capacities, or adding speakers, or modems, etc. a) Grades b) Prosody c) Synthesis d) Upgrades

Description : ____________ refer to renewing or changing components like increasing the main memory, or hard disk capacities, or adding speakers, or modems, etc. a) Grades b) Prosody c) Synthesis d) Upgrades

Last Answer : Answer: d Explanation: Upgrades is the right term to be used. Upgrades are installed to renew or implement a new feature. Except for upgrades, hardware is normally one-time expense

Which of the following statements is not true when describing a successful strategy? Select one: a. It fulfills its CSR obligations. b. It provides the means for renewing competitive advantage c. It addresses changes in the external environment d. It guarantees long term survival

Description : Which of the following statements is not true when describing a successful strategy? Select one: a. It fulfills its CSR obligations. b. It provides the means for renewing competitive advantage c. It addresses changes in the external environment d. It guarantees long term survival

Last Answer : It fulfills its CSR obligations

Which of the following statements is not true when describing a successful strategy? a) It provides some property that is unique or distinctive b) It provides the means for renewing competitive advantage c) It addresses changes in the external environment d) It guarantees long term survival

Description : Which of the following statements is not true when describing a successful strategy? a) It provides some property that is unique or distinctive b) It provides the means for renewing competitive advantage c) It addresses changes in the external environment d) It guarantees long term survival

Last Answer : It guarantees long term survival

Which of the following statements is not true when describing a successful strategy? A. It provides some property that is unique or distinctive B. It provides the means for renewing competitive advantage C. It addresses changes in the external environment D. It guarantees long term survival

Description : Which of the following statements is not true when describing a successful strategy? A. It provides some property that is unique or distinctive B. It provides the means for renewing competitive advantage C. It addresses changes in the external environment D. It guarantees long term survival

Last Answer : It provides the means for renewing competitive advantage

Steam Properties and Qualities: • they are capable of dividing and renewing themselves for long periods • they are unspecialized • they can give rise to specialized cell types. • All of above

Description : Steam Properties and Qualities: • they are capable of dividing and renewing themselves for long periods • they are unspecialized • they can give rise to specialized cell types. • All of above

Last Answer : • All of above

Assertion (A): In hydrodynamic journal bearings, the rotating journal is held in floating condition by the hydrodynamic pressure developed in the lubricant. Reason (R): Lubricant flows in a converging-diverging channel. [IES-1994] (a) Both A and R are individually true and R is the correct explanation of A (b) Both A and R are individually true but R is not the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): In hydrodynamic journal bearings, the rotating journal is held in floating condition by the hydrodynamic pressure developed in the lubricant. Reason (R): Lubricant flows in a converging-diverging channel. [IES-1994] ... A (c) A is true but R is false (d) A is false but R is true

Last Answer : (a) Both A and R are individually true and R is the correct explanation of A

Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal bearings balances the load on the journal. (a) Both A and R are true and R is the correct explanation of A (b) Both A and R are true but R is NOT the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): In steady rotating condition the journal inside a hydrodynamic journal bearing remains floating on the oil film. [IES-2008] Reason (R): The hydrodynamic pressure developed in steady rotating conditions in journal ... A (c) A is true but R is false (d) A is false but R is true

Last Answer : (a) Both A and R are true and R is the correct explanation of A

What is a magnetic pick-up?*

Description : What is a magnetic pick-up?*

Last Answer : An electromagnet used as a speed or position sensor.

The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Description : The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Last Answer : (d) potential barrier

A galvanometer having a resistance of 4.5 Ω can read up to 5 mA. If it is to read 100 V, then the high resistance to be used in series will be a) 19998 Ω b) 19995.8 Ω c) 19995.5 Ω d) 19996.5 Ω

Description : A galvanometer having a resistance of 4.5 Ω can read up to 5 mA. If it is to read 100 V, then the high resistance to be used in series will be a) 19998 Ω b) 19995.8 Ω c) 19995.5 Ω d) 19996.5 Ω

Last Answer : c) 19995.5

State which electric motors are generally used in electro agro systems with reason.

Description : State which electric motors are generally used in electro agro systems with reason.

Last Answer : 1) 3 phase induction motor is used in electro agro system for water pumping from wells as 3 phase ac supply is easily available, cost of induction motor is less, maintenance free being rugged ... as 1 phase ac supply is easily available for domestic purpose, repair is simple and easily available.

5) An iron ring of mean circumference of 80 cm is uniformly wound with 500 turns of wire. Calculate the value of flux density that a current of 1 A would produce in the ring. Assume relative permeability 1400.

Description : Please ripley me due to emergency

Last Answer : To calculate the flux density in the ring, you need to use the following formula: B = (μ * I * N) / (2 * π * r) where: B is the flux density in the ring (in teslas) μ is the relative permeability ... 2 * π * 0.127 m) = 0.53 T So the flux density in the ring would be approximately 0.53 teslas.

Can you help me solve my electrical mystery?

Description : Can you help me solve my electrical mystery?

Last Answer : Any signs of animal life? They can get in the walls and chew on the wires. Or is it the entire area served by that breaker? The breaker could be bad. It happens with anything mechanical.

How to tell if a power strip is burned out?

Description : How to tell if a power strip is burned out?

Last Answer : answer:Personally, I would either toss it, or down grade it to outdoor use only. I wouldn’t take a chance with it in the house. Yes, you can let it cool down, then test it again. But a failure is a failure. Does it have a reset button? What price range did you pay?

I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Description : I accidently soaked an extension cord. Is it safe to use it again after letting it dry out for awhile?

Last Answer : The plug end is easier to dry out than the socket end get out your blow-dryer and set it to high and blow the end that got wet for a while. That will get most of the water off/out of ... up or sputter. Most modern extension cords are pretty watertight so there shouldn't be any water down the wire.