If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM  together with _____ memory and devices.  
a) EA, high, internal, external  
b) EA, low, internal, external  
c) EA, high, external, internal  
d) EA, low, external, internal
by

1 Answer

Answer :

a) EA, high, internal, external
by

Related questions

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus

Description : Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus

Last Answer : c. EPROM

In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1

Description : In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1

Last Answer : a) 000BH, a high to low transition on pin INT1

Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Description : Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Last Answer : b. RAM

Customized ROMS are called: a. Mask ROM b. Flash ROM c. EPROM d. None of these

Description : Customized ROMS are called: a. Mask ROM b. Flash ROM c. EPROM d. None of these

Last Answer : a. Mask ROM

____ causes the address of the next microprocessor to be obtained from the memory: a. CRJA b. ROM c. MAP d. HLT

Description : ____ causes the address of the next microprocessor to be obtained from the memory: a. CRJA b. ROM c. MAP d. HLT

Last Answer : c. MAP

Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Description : Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Last Answer : d) P3.1

Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Description : Which pin of port 3 is has an alternative function as write control signal for external data memory? a) P3.8 b) P3.3 c) P3.6 d) P3.1

Last Answer : c) P3.6

A___ on this pin indicates a memory operation: a. Low b. High c. Medium d. None of these

Description : A___ on this pin indicates a memory operation: a. Low b. High c. Medium d. None of these

Last Answer : a. Low

The memory which is programmed at the time it is manufactured a. POM b. RAM c. PROM d. EPROM

Description : The memory which is programmed at the time it is manufactured a. POM b. RAM c. PROM d. EPROM

Last Answer : a. POM

which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Description : which chips using special external equipment can reprogram a. ROM b. PROM c. SAM d. RAM

Last Answer : b. PROM

In 8279, a scanned sensor matrix mode, if a sensor changes its state, the ___ line goes ____ to interrupt the CPU. a) CS, high b) A0, high c) IRQ, high d) STB, high

Description : In 8279, a scanned sensor matrix mode, if a sensor changes its state, the ___ line goes ____ to interrupt the CPU. a) CS, high b) A0, high c) IRQ, high d) STB, high

Last Answer : c) IRQ, high

CPU performs read/write operations at any point in time in _____ A. PROM B. EPROM C. RAM D. ROM

Description : CPU performs read/write operations at any point in time in _____ A. PROM B. EPROM C. RAM D. ROM

Last Answer : B. EPROM

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH

Last Answer : c) 2000 to 3FFFH

The memory which is programmed at the time it is manufactured A) ROM B) RAM C) PROM D) EPROM

Description : The memory which is programmed at the time it is manufactured A) ROM B) RAM C) PROM D) EPROM

Last Answer : Answer : C

Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus

Description : Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus

Last Answer : EPROM

Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus

Description : Which of the following is form of semi conductor memory in which it is possible to change the contents of selected memory locations by applying suitable electrical signals? a. CAM b. ROM c. EPROM d. Abacus

Last Answer : c. EPROM

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : a) 1, 8bit, single processor

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : c) 2, 9 bit, multiple processors

The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Description : The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Last Answer : a. Interrupt

CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above

Description : CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above

Last Answer : d. None of the above

Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM

Description : Which is the type of memory for information that does not change on your computer? a. RAM b. ROM c. ERAM d. RW / RAM

Last Answer : b. ROM

A memory that is capable of determining whether a given datum is contained in one of its address is a. ROM b. PROM c. CAM d. RAM

Description : A memory that is capable of determining whether a given datum is contained in one of its address is a. ROM b. PROM c. CAM d. RAM

Last Answer : c. CAM

The instructions for starting the computer are house on a. Random access memory b. CD-Rom c. Read only memory chip

Description : The instructions for starting the computer are house on a. Random access memory b. CD-Rom c. Read only memory chip

Last Answer : c. Read only memory chip

The two kinds of main memory are: a. Primary and secondary b. Random and sequential c. ROM and RAM d. All of above

Description : The two kinds of main memory are: a. Primary and secondary b. Random and sequential c. ROM and RAM d. All of above

Last Answer : c. ROM and RAM

CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above

Description : CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above

Last Answer : d. None of above

CD-ROM stands for a. Compactable Read Only Memory b. Compact Data Read Only Memory c. Compactable Disk Read Only Memory d. Compact Disk Read Only Memory

Description : CD-ROM stands for a. Compactable Read Only Memory b. Compact Data Read Only Memory c. Compactable Disk Read Only Memory d. Compact Disk Read Only Memory

Last Answer : d. Compact Disk Read Only Memory

___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Description : ___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Last Answer : b. Cache memory

The CPU removes the ___ signal to complete the memory write operation: a. Read b. Write c. Both A and B d. None of these

Description : The CPU removes the ___ signal to complete the memory write operation: a. Read b. Write c. Both A and B d. None of these

Last Answer : a. Read

Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Description : Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Last Answer : b) POPF, Real

How many address lines in a 4096 x 8 EPROM CHIP?

Description : How many address lines in a 4096 x 8 EPROM CHIP?

Last Answer : 12 address lines.

EPROM stands for:

Description : EPROM stands for:

Last Answer : a. Erasable Programmable read-only memory

Control memory is part of __ that has addressable storage registers and used as temporary storage for data. a. ROM b. RAM c. CPU d. Memory

Description : Control memory is part of __ that has addressable storage registers and used as temporary storage for data. a. ROM b. RAM c. CPU d. Memory

Last Answer : b. RAM

In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : c) bus width select

In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : b) address valid strobe select

Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Description : Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Last Answer : b. external

Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software r

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : b. external

Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : d. software

What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer that sets the system if the software fails to operate properly. c) The watchdog Timer is an internal timer that resets the system if the software fails to operate properly. d) None of them

Description : What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer ... internal timer that resets the system if the software fails to operate properly. d) None of them

Last Answer : b) The watchdog Timer is an internal timer that sets the system if the software fails to operate properly.

What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer that sets the system if the software fails to operate properly. c) The watchdog Timer is an internal timer that resets the system if the software fails to operate properly. d) None of them

Description : What is the function of watchdog timer? a) The watchdog Timer is an external timer that resets the system if the software fails to operate properly. b) The watchdog Timer is an internal timer ... internal timer that resets the system if the software fails to operate properly. d) None of them

Last Answer : c) The watchdog Timer is an internal timer that resets the system if the software fails to operate properly.

An __ -0 option is used for. a. Input file b. External file c. Output file d. None of these

Description : An __ -0 option is used for. a. Input file b. External file c. Output file d. None of these

Last Answer : c. Output file

The organization of I/O devices create a difference between _____: a. Digital computer b. Micro computer c. A and B d. None of these

Description : The organization of I/O devices create a difference between _____: a. Digital computer b. Micro computer c. A and B d. None of these

Last Answer : c. A and B

In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH

Description : In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH

Last Answer : c) SM2 , 9DH

Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Last Answer : a. BYTE

Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Description : Interface electronic circuit is used to interconnect I/O devices to a computer’s CPU or a. ALU b. Memory c. Buffer d. Register

Last Answer : b. Memory

A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Description : A type of core store that has a lower access time than the devices used for working store in the same processor is known as a. Core memory b. Buffer c. Fast core d. Address register

Last Answer : d. Address register

__ bit in ICW1 indicates whether the 8259A is cascade mode or not? a) LTIM=0 b) LTIM=1 c) SNGL=0 d) SNGL=1

Description : __ bit in ICW1 indicates whether the 8259A is cascade mode or not? a) LTIM=0 b) LTIM=1 c) SNGL=0 d) SNGL=1

Last Answer : c) SNGL=0

The conditional branch instruction JNS performs the operations when if __ a) ZF =0 b) SF=0 c) PF=0 d) CF=0

Description : The conditional branch instruction JNS performs the operations when if __ a) ZF =0 b) SF=0 c) PF=0 d) CF=0

Last Answer : b) SF=0

Explain the difference between ROM, PROM, EPROM and EEPROM in detail?

Description : Explain the difference between ROM, PROM, EPROM and EEPROM in detail?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want