Description : The stereophonic subcarrier suppression level in the Philippines standards:
Last Answer : less than 1% modulation of the main carrier
Description : The channel spacing in the Philippine FM broadcast standards
Last Answer : 800 kHz
Description : The channel spacing in the Philippine FM broadcast standards.
Description : The process of moving from one energy level to another is called __
Last Answer : Absorption
Description : The process of decaying from one energy level to another energy level is called _______
Last Answer : Spontaneous emission
Description : Emphasizing low-level signals and compressing higher level signals is called:
Last Answer : companding
Description : A transmission of binary data which involves the transmission of two non – zero voltage level
Last Answer : Bipolar
Description : What is the spectrum of stereophonic FM signal? A. 19 to 38 kHz B. 30 to 53 kHz C. 59.5 to 74.5 kHz D. 88 to 108 MHz
Last Answer : B. 30 to 53 kHz
Description : The frequency spectrum of the stereophonic FM signal. A. 67 kHz B. 59.5 to 74.5 kHz C. 19 to 38 kHz D. 30 to 53 kHz
Last Answer : D. 30 to 53 kHz
Description : Which of the following statements best describes the primary purpose of Philippines Standards on Auditing? a. They are authoritative statements, enforced through the Code of Ethics ... interpretations which are intended to clarify the meaning of "generally accepted auditing standards.
Last Answer : They are interpretations which are intended to clarify the meaning of "generally accepted auditing standards.
Description : Which of the following mostly describes the function of AASC? a. To monitor full compliance by auditors to PSAs. b. To assist the Board of Accountancy in conducting administrative proceedings on ... both auditing and financial accounting in order to make them responsive to the needs of the public
Last Answer : To promulgate auditing standards, practices and procedures that shall be generally accepted by the accounting profession in the Philippines.
Description : The decision as to how much evidence to be accumulated for a given set of circumstances is: a. Provided in the Philippines Standards on Auditing. b. Provided by following GAAP c. One requiring professional judgment d. Determined by statistical analysis
Last Answer : One requiring professional judgment
Description : CPAs in public practice who perform assurance engagements are governed by the following, except a. Framework for Assurance Engagements b. Philippine Standards on Quality Control c. Code of Ethics for ... Accountants in the Philippines d. AASC's Engagement Standards (PSAs, PSREs, PSAEs, and PSRSs
Last Answer : AASC's Engagement Standards (PSAs, PSREs, PSAEs, and PSRSs
Description : Which of the following is one of the functions of Quality Review Committee: a. To promulgate accounting and auditing standards that will be generally accepted in the Philippines. ... accountancy. d. To evaluate periodically the performance of educational institutions offering accountancy education.
Last Answer : To conduct a review on applicants for registration to practice public accountancy and render a report which shall be attached to the application for registration.
Description : This is the standard-setting body that replaces the Accounting Standards Council (ASC) and is tasked to develop and issue standards which will represent generally accepted accounting principles in ... Committee. c. Financial Reporting Standards Council. d. Auditing and Assurance Standards Council.
Last Answer : Financial Reporting Standards Council.
Description : In financial statement audits, the audit should be conducted in accordance with a. PAS / PFRS b. Generally accepted auditing standards c. Philippine Standards on Auditing d. Code of Ethics for CPAs in the Philippines
Last Answer : Philippine Standards on Auditing
Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___
Last Answer : is horizontal
Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power
Last Answer : directive gain
Description : The property of interchangeability for the transmitting and receiving operations is known as ____
Last Answer : reciprocity
Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space
Last Answer : radiation field
Description : It is the ratio of the radiated to the reflected energy:
Last Answer : Radiation efficiency
Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates
Last Answer : . Radiation resistance
Description : Plots of field strength or power density with respect to the value at a reference point.
Last Answer : relative radiation pattern
Description : The radiation pattern plotted in terms of electric field strength or power density
Last Answer : absolute radiation pattern
Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____
Last Answer : line of shoot
Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated
Last Answer : waveguide
Description : If energy is applied at the geometrical center of antenna, the antenna is said to be ___
Last Answer : center-fed
Description : The radiation pattern of collinear and a broadside antenna is __
Last Answer : bidirectional
Description : Hertz antenna are predominantly used with frequencies above
Last Answer : 2MHz
Description : The point on the antenna where the transmission line is connected is called _____
Last Answer : feedpoint
Description : The discone antenna is
Last Answer : useful as a UHF receiving antenna
Description : It is the same with directive gain except that the total power fed to the antenna is used and the antenna efficiency is taken into account.
Last Answer : power gain
Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.
Last Answer : UDP
Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies
Last Answer : Forums
Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.
Last Answer : Semantics
Description : ________ defines how a particular pattern to be interpreted, and what action is to be taken based on that interpretation.
Last Answer : syntax
Description : The effect of a large magnitude of the numerical aperture.
Last Answer : The amount of external light the fiber will accept is greater
Description : It is the figure of merit used to measure the magnitude of the acceptance angle.
Last Answer : numerical aperture
Description : It is a result of photons of light that are absorbed by the atoms of the glass core molecule
Last Answer : infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.
Last Answer : ultraviolet absorption
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT
Last Answer : absorption loss
Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.
Last Answer : Acceptance cone half-angle
Description : Laser light is very bright because it is:
Last Answer : coherent
Description : Any energy above the ground state is called ________
Last Answer : excited state
Description : What phenomenon will result if the glass fiber is exposed to long periods of high humidity?
Last Answer : stress corrosion
Description : Developed an optical fiber with losses less that 2 dB/km
Last Answer : Kao and Bockham
Description : Optical power is sometimes called ____
Last Answer : Radiant flux
Description : The term single mode and multimode are best described as:
Last Answer : the number of wavelengths each fiber can support
Description : Photodiodes operate properly with:
Last Answer : reverse bias
Description : Range of wavelengths of ultraviolet
Last Answer : 10 nm to 390 nm