Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.
Last Answer : The amount of external light the fiber will accept is greater.
Description : It is a graphical representation of the magnitude of the refractive index across the fiber. ∙ A. mode ∙ B. index profile ∙ C. numerical aperture ∙ D. refractive index
Last Answer : B. index profile
Description : It is the figure of merit used to measure the magnitude of the acceptance angle. ∙ A. acceptance angle ∙ B. numerical aperture ∙ C. index profile
Last Answer : B. numerical aperture
Description : Numerical indication of how efficiently a PCM code is utilized
Last Answer : Coding efficiency
Description : It is the figure of merit used to measure the magnitude of the acceptance angle.
Last Answer : numerical aperture
Description : It is the ratio of the largest possible magnitude to the smallest possible magnitude that can be decoded by the digital-to-analog converter in the receiver.
Last Answer : Dynamic range
Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is a. 017 b. 0.26 c. 0.50 d. 0.75
Last Answer : b. 0.26
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection a. Mode b. Grade c. Numerical Aperture d. Dispersion
Last Answer : a. Mode
Description : The refractive index is 2.33 and the critical angle is 350. Find the numerical aperture. a) 2 b) 1.9 c) 2.33 d) 12
Last Answer : b) 1.9
Description : The numerical aperture of a material with acceptance angle of 60 degree in water will be a) 1.15 b) 2.15 c) 5.21 d) 1.52
Last Answer : a) 1.15
Description : Find the acceptance angle of a material which has a numerical aperture of 0.707 in air. a) 30 b) 60 c) 45 d) 90
Last Answer : c) 45
Description : The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86
Last Answer : d) 1.86
Description : Numerical aperture is expressed as the a) NA = sin θa b) NA = cos θa c) NA = tan θa d) NA = sec θa
Last Answer : a) NA = sin θa
Description : Magnification of compound microscope is not connected with (a) numerical aperture (b) focal length of objective (c) focal length of eye piece (d) tube length.
Last Answer : (a) numerical aperture
Description : Electron microscope has a high resolution power. This is due to (a) electromagnetic lenses (b) very low wavelength of electron beam (c) low wavelength of light source used (d) high numerical aperture of glass lenses used.
Last Answer : (b) very low wavelength of electron beam
Description : The number of modes propagated in a multimode fiber depends on core size and numerical aperture (NA). If the core size and the NA decrease, will the number of modes propagated increase or decrease?
Last Answer : Decrease.
Description : What fiber property does numerical aperture (NA) measure?
Last Answer : NA measures the light-gathering ability of an optical fiber.
Description : The numerical aperture is the ____________________ of the angle of
Last Answer : sine
Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector
Last Answer : A. using a monochromatic light source
Description : The numerical aperture of a fiber if the angle of acceptance is 15 degrees, is ∙ a. 017 ∙ b. 0.26 ∙ c. 0.50 ∙ d. 0.75
Last Answer : ∙ b. 0.26
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Description : It is a large scale integration chip designed for use in telecommunication industry for private branch exchanges, central office switches, digital handsets and digital echo suppressors.
Last Answer : Codec
Description : The size, shape, and dielectric material of a waveguide must be constant throughout its length for energy to move from one end to the other without reflections. What could be the effect in any abrupt change in its size or shape?
Last Answer : Reflections.
Description : When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as
Last Answer : Faraday Rotation Effect
Description : With which emission type is the capture effect more pronounced?
Last Answer : FM
Description : Skin effect" refers to
Last Answer : the increase of wire resistance with frequency
Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___
Last Answer : is horizontal
Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power
Last Answer : directive gain
Description : The property of interchangeability for the transmitting and receiving operations is known as ____
Last Answer : reciprocity
Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space
Last Answer : radiation field
Description : It is the ratio of the radiated to the reflected energy:
Last Answer : Radiation efficiency
Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates
Last Answer : . Radiation resistance
Description : Plots of field strength or power density with respect to the value at a reference point.
Last Answer : relative radiation pattern
Description : The radiation pattern plotted in terms of electric field strength or power density
Last Answer : absolute radiation pattern
Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____
Last Answer : line of shoot
Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated
Last Answer : waveguide
Description : If energy is applied at the geometrical center of antenna, the antenna is said to be ___
Last Answer : center-fed
Description : The radiation pattern of collinear and a broadside antenna is __
Last Answer : bidirectional
Description : Hertz antenna are predominantly used with frequencies above
Last Answer : 2MHz
Description : The point on the antenna where the transmission line is connected is called _____
Last Answer : feedpoint
Description : The discone antenna is
Last Answer : useful as a UHF receiving antenna
Description : It is the same with directive gain except that the total power fed to the antenna is used and the antenna efficiency is taken into account.
Last Answer : power gain
Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.
Last Answer : UDP
Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies
Last Answer : Forums
Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.
Last Answer : Semantics
Description : ________ defines how a particular pattern to be interpreted, and what action is to be taken based on that interpretation.
Last Answer : syntax
Description : It is a result of photons of light that are absorbed by the atoms of the glass core molecule
Last Answer : infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.
Last Answer : ultraviolet absorption
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT
Last Answer : absorption loss
Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.
Last Answer : Acceptance cone half-angle