Hertz antenna are predominantly used with  frequencies above

1 Answer

Answer :

2MHz

Related questions

Description : A 4.5-MHz signal which is equal to the difference between the picture and sound RF carrier frequencies in a 6-MHz TV channel.

Last Answer : Intercarrier frequencY

Description : Image frequencies occur when two signals ____.

Last Answer : enter the mixer, one below and one above the local oscillator by a difference equal to the IF

Description : The magnetic field of an antenna is perpendicular to the earth. The antenna’s polarization ___

Last Answer : is horizontal

Description : It is the ratio of the power density radiated in a particular direction to the power density radiated to the same point by a reference antenna, assuming both antennas are radiating the same amount of power

Last Answer : directive gain

Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Last Answer : radiation field

Description : It is the resistance that, if it replaced the antenna, would dissipate exactly the same amount of power that the antenna radiates

Last Answer : . Radiation resistance

Description : The line bisecting the major lobe, or pointing from the center of the antenna in the direction of maximum radiation is called _____

Last Answer : line of shoot

Description : If energy is applied at the geometrical center of antenna, the antenna is said to be ___

Last Answer : center-fed

Description : The radiation pattern of collinear and a broadside antenna is __

Last Answer : bidirectional

Description : The point on the antenna where the transmission line is connected is called _____

Last Answer : feedpoint

Description : The discone antenna is

Last Answer : useful as a UHF receiving antenna

Description : It is the same with directive gain except that the total power fed to the antenna is used and the antenna efficiency is taken into account.

Last Answer : power gain

Description : A class A FM station is limited in antenna height of ______ feet above average terrain.

Last Answer : 2000

Description : What range of frequencies are usually referred to as the Ultra High Frequency (UHF) Band? w) 3 to 30 Mega Hertz x) 30 to 300 Mega Hertz y) 300 to 3,000 Mega Hertz z) 30,000 to 300,000 Mega Hertz

Last Answer : ANSWER: Y -- 300 to 3,000 MEGA HERTZ

Description : What range of frequencies are usually referred to as audio frequencies for humans? w) 0 to 20 Hertz x) 20 to 20,000 Hertz y) 200 to 200,000 Hertz z) 10,000 to 30,000 Hertz

Last Answer : ANSWER: X -- 20 TO 20,000 HERTZ

Description : Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Last Answer : B. Yagi

Description : Which antenna is not grounded at one end? A. Hertz B. Marconi C. Dipole D. Whip

Last Answer : C. Dipole

Description : The effect of adding parasitic elements of a Hertz dipole is to A. make the antenna more omnidirectional B. reduce its resonant frequency C. increase the antenna’s power gain D. All of these

Last Answer : C. increase the antenna’s power gain

Description : A Hertz antenna is operating on a frequency of 2182 kHz and consists of a horizontal wire that is hanged between two towers. What is the frequency of its third harmonic? A. 727 kHz B. 6546 kHz C. 436 kHz D. 6.546 kHz

Last Answer : B. 6546 kHz

Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole

Last Answer : B. vertical quarter-wavelength rod

Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Last Answer : C. its resonant frequency will be increased

Description : Which of the following antennas receive signals in the horizontal plane equality well from all directions? A. Horizontal Hertz antenna B. Vertical loop antenna C. Vertical Yagi antenna D. A vertical antenna which is a quarter-wavelength long

Last Answer : D. A vertical antenna which is a quarter-wavelength long

Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Last Answer : D. By connecting an inductor in series with the antenna

Description : Which of the following antennas require good grounding? A. Yagi antenna B. Hertz antenna C. Marconi antenna D. Isotropic antenna

Last Answer : C. Marconi antenna

Description : This is a flexible vertical rod antenna commonly used on mobiles. A. Marconi B. Hertz C. Whip D. Ground plane

Last Answer : C. Whip

Description : Where do the maximum current and minimum voltage values on a resonant Hertz dipole exist? A. Center of the antenna B. Near the end of the antenna C. Near the center of the antenna D. Ends of the antenna

Last Answer : A. Center of the antenna

Description : Which is properly terminated antenna? A. Rhombic B. Hertz C. Marconi D. Dipole

Last Answer : A. Rhombic

Description : ECE Board Exam March 1996 A type of an underground antenna is a/an __________ antenna. A. Hertz B. isotropic C. parabolic D. Marconi

Last Answer : A. Hertz

Description : The property of interchangeability for the transmitting and receiving operations is known as ____

Last Answer : reciprocity

Description : It is the ratio of the radiated to the reflected energy:

Last Answer : Radiation efficiency

Description : Plots of field strength or power density with respect to the value at a reference point.

Last Answer : relative radiation pattern

Description : The radiation pattern plotted in terms of electric field strength or power density

Last Answer : absolute radiation pattern

Description : A special type of transmission line that consist of conducting metallic tube through which high frequency electromagnetic energy is propagated

Last Answer : waveguide

Description : ____ is a process-to-process protocol that adds only port addresses, checksum error control, and length information to the data from the upper layer.

Last Answer : UDP

Description : ______ are special-interest groups that quickly test, evaluate, and standardize new technologies

Last Answer : Forums

Description : _______ refers to the structure or format of the data, meaning the order in which they are presented.

Last Answer : Semantics

Description : ________ defines how a particular pattern to be interpreted, and what action is to be taken based on that interpretation.

Last Answer : syntax

Description : The effect of a large magnitude of the numerical aperture.

Last Answer : The amount of external light the fiber will accept is greater

Description : It is the figure of merit used to measure the magnitude of the acceptance angle.

Last Answer : numerical aperture

Description : It is a result of photons of light that are absorbed by the atoms of the glass core molecule

Last Answer : infrared absorption

Description : It is caused by valence electrons in the silica material from which the fiber are manufactured.

Last Answer : ultraviolet absorption

Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heaT

Last Answer : absorption loss

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber.

Last Answer : Acceptance cone half-angle

Description : Laser light is very bright because it is:

Last Answer : coherent

Description : The process of moving from one energy level to another is called __

Last Answer : Absorption

Description : The process of decaying from one energy level to another energy level is called _______

Last Answer : Spontaneous emission

Description : Any energy above the ground state is called ________

Last Answer : excited state

Description : What phenomenon will result if the glass fiber is exposed to long periods of high humidity?

Last Answer : stress corrosion

Description : Developed an optical fiber with losses less that 2 dB/km

Last Answer : Kao and Bockham

Description : Optical power is sometimes called ____

Last Answer : Radiant flux