Description : What generates a light beam of a specific visible frequency? a. Laser b. Maser c. Infrared d. Flashlight
Last Answer : a. Laser
Description : ________ generates light beam at a specific visible frequency. A. Glass fiber B. Infrared C. Light waves D. Laser
Last Answer : D. Laser
Description : They wrote a paper describing how it was possible to use stimulated emission for amplifying light waves (laser) as well as microwaves (maser). ∙ A. Theodore Maiman ∙ B. KC Kao and GA Bockham ∙ C. Charles Townes and Arthur Schawlow ∙ D. Kapron, Keck and Maurer
Last Answer : C. Charles Townes and Arthur Schawlow
Description : It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption
Last Answer : D. ion resonance absorption
Description : t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption
Last Answer : B. infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption
Last Answer : ultraviolet absorption
Description : Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray
Last Answer : B. infrared
Description : The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet
Last Answer : Ultraviolet
Description : The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray
Last Answer : B. Visible light
Description : The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow
Last Answer : ∙ C. Infrared
Description : Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray
Last Answer : ∙ b. Infrared
Description : The band of light wavelengths that are too short to be seen by the human eye ∙ a. Amber ∙ b. Visible ∙ c. Infrared ∙ d. Ultraviolet
Last Answer : c. Infrared
Description : The band of light wavelengths that are too long to be seen by the human eye ∙ a. Amber ∙ b. Visible ∙ c. Infrared ∙ d. Ultraviolet
Description : Which laser emits light in the visible range 400 to 700 nm? ∙ a. Argon-ion ∙ b. Nitrogen ∙ c. Carbon-dioxide ∙ d. Neodymium-YAG
Last Answer : a. Argon-ion
Description : Which of the following materials is sensitive to light? ∙ a. Photoresist ∙ b. Photosensitive ∙ c. Light Sensitive ∙ d. Maser
Last Answer : a. Photoresist
Description : Which of the following is not a part of the optical spectrum? ∙ A. infrared ∙ B. ultraviolet ∙ C. visible color ∙ D. x-rays
Last Answer : ∙ D. x-rays
Description : The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission
Last Answer : ∙ a. Pulses of 694 nm red light
Description : A dielectric waveguide for the propagation of electromagnetic energy at light frequencies ∙ a. Stripline ∙ b. Microstrip ∙ c. Laser beam ∙ d. Fiber optics
Last Answer : d. Fiber optics
Description : The scientist who built the first optical maser ∙ A. Charles Townes ∙ B. GA Bockham ∙ C. Theodore Maiman ∙ D. ACS Van Heel
Last Answer : ∙ C. Theodore Maiman
Description : The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted” is known as ____________. ∙ A. Einstein law of photon ∙ B. Marconi’s law ∙ C. Maxwell’s law ∙ D. Plank’s law
Last Answer : D. Plank’s law
Description : The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz
Last Answer : d. 375 x 1018 Hz
Description : When a beam of light enters one medium from another, which quantity will not change? ∙ a. Direction ∙ b. Speed ∙ c. Frequency ∙ d. Wavelength
Last Answer : c. Frequency
Description : What is the photon energy for an infrared wave with frequency of 1012 Hz? ∙ a. 10.6 x 1034 joules ∙ b. 6.63 x 10-34 joules ∙ c. 6.63 x 10-22 joules ∙ d. 10.6 x 1022 joules
Last Answer : ∙ c. 6.63 x 10-22 joules
Description : Infrared light has a wavelength that is ∙ A. less than 400 nm ∙ B. more than 700 nm ∙ C. less than 700 nm ∙ D. a little over 400 nm
Last Answer : B. more than 700 nm
Description : ________ is the result of photons of light that are absorbed by the atoms of the glass core molecules ∙ a. Ion resonance absorption ∙ b. Ultraviolet absorption ∙ c. Infrared absorption ∙ d. Absorption loss
Last Answer : c. Infrared absorption
Description : In refraction that occurs in air/glass interfaces, among the visible light, which is the bent the least? ∙ A. violet ∙ B. blue ∙ C. red ∙ D. orange
Last Answer : C. red
Description : In refraction that occurs in air/glass interfaces, among the visible light, which is bent the most? ∙ A. red ∙ B. violet ∙ C. yellow ∙ D. green
Last Answer : ∙ B. violet
Description : It is the science of measuring only light waves that are visible to the human eye. ∙ A. Radiometry ∙ B. Photometry ∙ C. Ophthalmology ∙ D. Optometry
Last Answer : B. Photometry
Description : ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm
Last Answer : D. 390 nm to 770 nm
Description : Which of the following colors is not found in the visible light wave spectrum? ∙ a. Red ∙ b. White ∙ c. Orange ∙ d. Yellow
Last Answer : b. White
Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal
Last Answer : ∙ a. It has high losses
Description : The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm
Last Answer : b. 400 to 750 nm
Description : Which light emitter is preferred for high-speed data in a fiber-optic system? ∙ A. incandescent ∙ B. LED ∙ C. neon ∙ D. laser
Last Answer : D. laser
Description : Coherence of laser light is important for _________ ∙ a. Light propagation ∙ b. Getting laser light to pass through air ∙ c. Drilling holes ∙ d. Holography
Last Answer : d. Holography
Description : What is used to block light from a laser and let other light through ∙ a. Neutral density ∙ b. Color ∙ c. Interference ∙ d. Spatial
Last Answer : ∙ c. Interference
Description : Laser light is very bright because it is ∙ a. Pure ∙ b. White ∙ c. Coherent ∙ d. Monochromatic
Last Answer : c. Coherent
Description : Which light emitter is preferred for high speed data in a fiber-optic system ∙ a. Incandescent ∙ b. LED ∙ c. Neon ∙ d. Laser
Last Answer : ∙ d. Laser
Description : Which of the following contributes to the broadening of laser emission bandwidth? ∙ a. Doppler shift of moving atoms and molecules ∙ b. Amplification within the laser medium ∙ c. Coherence of the laser light ∙ d. Optical pumping of the laser transition
Last Answer : Doppler shift of moving atoms and molecules
Description : Laser light is ______ emission. ∙ a. Coherent ∙ b. Stimulated ∙ c. Spontaneous ∙ d. Coherent and stimulated
Last Answer : ∙ d. Coherent and stimulated
Description : A device that was constructed from mirrors and selenium detectors that transmitted sound waves over a beam of light. ∙ A. lightphone ∙ B. photophone ∙ C. cameraphone ∙ D. walletphone
Last Answer : B. photophone
Description : ____ is a light that can be coherent ∙ a. Spontaneous emission ∙ b. Monochromatic and in-phase ∙ c. Narrow beam divergence ∙ d. Monochromatic
Last Answer : ∙ b. Monochromatic and in-phase
Description : Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror
Last Answer : a. Splitting of white light into its component colors
Description : Range of infrared ∙ A. 360 nm to 440 nm ∙ B. 670 nm to 10^3 nm ∙ C. 110 nm to 240 nm ∙ D. 770 nm to 10^6 nm
Last Answer : D. 770 nm to 10^6 nm
Description : Infrared range for fiber optics ∙ a. 400 – 700 nm ∙ b. 700 – 1200 nm ∙ c. 300 – 2000 nm ∙ d. 400 – 7000 nm
Last Answer : b. 700 – 1200 nm
Description : Light beam which is highly directional is called: (1) eraser (2) grazer (3) maser (4) laser
Last Answer : (4) laser Explanation: Laser light is very different from normal light. It is very directional, has a very tight beam and is very strong and concentrated. The light released is monochromatic. It contains one specific wavelength of light (one specific colour).
Last Answer : laser
Description : The wavelength of a visible extends from ∙ A. 0.8 to 1.6 um ∙ B. 400 to 750 nm ∙ C. 200 to 660 nm ∙ D. 700 to 1200 nm
Last Answer : B. 400 to 750 nm
Description : Which of the following is not part of the optical spectrum? ∙ a. Infrafed ∙ b. Ultraviolet ∙ c. Visible color ∙ d. X-rays
Last Answer : ∙ d. X-rays
Description : Human laser was developed by A. Javen at Bell laboratory in ∙ a. 1960 ∙ b. 1962 ∙ c. 1963 ∙ d. 1964
Last Answer : a. 1960
Description : Which type of laser is the simplest to modulate directly by changing its excitation? ∙ a. Semiconductor ∙ b. Ruby ∙ c. Helium-neon ∙ d. Neodymium-YAG
Last Answer : a. Semiconductor