The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted” is known as ____________. ∙ A. Einstein law of photon ∙ B. Marconi’s law ∙ C. Maxwell’s law ∙ D. Plank’s law

The law that states “When visible light of high frequency electromagnetic radiation illuminates a metallic  surface, electrons are emitted” is known as ____________.
∙ A. Einstein law of photon
∙ B. Marconi’s law
∙ C. Maxwell’s law
∙ D. Plank’s law
by

1 Answer

Answer :

D. Plank’s law
by

Related questions

“When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted”

Description : “When visible light of high frequency electromagnetic radiation illuminates a metallic surface, electrons are emitted”

Last Answer : Plank’s law

Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ C. The angle is determined partly by a and b ∙ D. The angle is determined by the index of the materials

Description : Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ ... determined partly by a and b ∙ D. The angle is determined by the index of the materials

Last Answer : ∙ D. The angle is determined by the index of the materials

Optical detectors are square-law devices because they respond to _____ rather than amplitude ∙ a. Intensity ∙ b. Light ∙ c. Density ∙ d. Photon

Description : Optical detectors are square-law devices because they respond to _____ rather than amplitude ∙ a. Intensity ∙ b. Light ∙ c. Density ∙ d. Photon

Last Answer : a. Intensity

In radiometric terms, it measures the rate at which electromagnetic waves transfer light energy ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power

Description : In radiometric terms, it measures the rate at which electromagnetic waves transfer light energy ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power

Last Answer : D. Optical power

It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Description : It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Last Answer : ultraviolet absorption

What is the photon energy for an infrared wave with frequency of 1012 Hz? ∙ a. 10.6 x 1034 joules ∙ b. 6.63 x 10-34 joules ∙ c. 6.63 x 10-22 joules ∙ d. 10.6 x 1022 joules

Description : What is the photon energy for an infrared wave with frequency of 1012 Hz? ∙ a. 10.6 x 1034 joules ∙ b. 6.63 x 10-34 joules ∙ c. 6.63 x 10-22 joules ∙ d. 10.6 x 1022 joules

Last Answer : ∙ c. 6.63 x 10-22 joules

The _____ is equal to the number of electrons emitted per second times the electron charge ∙ a. Intensity ∙ b. Optical power ∙ c. Photocurrent ∙ d. Responsitivity

Description : The _____ is equal to the number of electrons emitted per second times the electron charge ∙ a. Intensity ∙ b. Optical power ∙ c. Photocurrent ∙ d. Responsitivity

Last Answer : c. Photocurrent

What generates a light beam of a specific visible frequency? ∙ a. Laser ∙ b. Maser ∙ c. Infrared ∙ d. Flashlight

Description : What generates a light beam of a specific visible frequency? ∙ a. Laser ∙ b. Maser ∙ c. Infrared ∙ d. Flashlight

Last Answer : ∙ a. Laser

Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion

Last Answer : D. wavelength dispersion

What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Description : What is the typical wavelength of light emitted from epitaxially grown LEDs? ∙ a. 840 nm ∙ b. 490 nm ∙ c. 480 nm ∙ d. 940 nm

Last Answer : ∙ d. 940 nm

The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission

Description : The first laser emitted ∙ a. Pulses of 694 nm red light ∙ b. A continuous red beam ∙ c. Pulses of white light from a helical flash lamp ∙ d. Spontaneous emission

Last Answer : ∙ a. Pulses of 694 nm red light

Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth

Description : Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth

Last Answer : c. Spectral width

The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow

Description : The band of light frequencies that are too high to be seen by the human eye. ∙ A. Ultraviolet ∙ B. Visible light ∙ C. Infrared ∙ D. Yellow

Last Answer : ∙ C. Infrared

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

The energy of the photon is ∙ a. Directly proportional to its bandwidth ∙ b. Directly proportional to the Planck’s constant ∙ c. Directly proportional to Boltzmann’s constant ∙ d. Inversely proportional to the Planck’s constant

Description : The energy of the photon is ∙ a. Directly proportional to its bandwidth ∙ b. Directly proportional to the Planck’s constant ∙ c. Directly proportional to Boltzmann’s constant ∙ d. Inversely proportional to the Planck’s constant

Last Answer : Directly proportional to the Planck’s constant

The _____ of a detector is the fraction of incident photons that produce a photoelectron or electron-hole pair ∙ a. Responsitivity ∙ b. Photon efficiency ∙ c. Aperture ∙ d. Quantum efficiency

Description : The _____ of a detector is the fraction of incident photons that produce a photoelectron or electron-hole pair ∙ a. Responsitivity ∙ b. Photon efficiency ∙ c. Aperture ∙ d. Quantum efficiency

Last Answer : d. Quantum efficiency

LASER stands for: a. Light Amplification by Simulated Emission of Radiation b. Light Amplification by Stimulated Emission of Radiation c. Light Amplification by Simulated Emitted Rays d. Light Amplification by Stimulated Emitted Rays

Description : LASER stands for: a. Light Amplification by Simulated Emission of Radiation b. Light Amplification by Stimulated Emission of Radiation c. Light Amplification by Simulated Emitted Rays d. Light Amplification by Stimulated Emitted Rays

Last Answer : b. Light Amplification by Stimulated Emission of Radiation

It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption

Description : It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption

Last Answer : D. ion resonance absorption

t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Description : t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption

Last Answer : B. infrared absorption

In refraction that occurs in air/glass interfaces, among the visible light, which is the bent the least? ∙ A. violet ∙ B. blue ∙ C. red ∙ D. orange

Description : In refraction that occurs in air/glass interfaces, among the visible light, which is the bent the least? ∙ A. violet ∙ B. blue ∙ C. red ∙ D. orange

Last Answer : C. red

It is the science of measuring only light waves that are visible to the human eye. ∙ A. Radiometry ∙ B. Photometry ∙ C. Ophthalmology ∙ D. Optometry

Description : It is the science of measuring only light waves that are visible to the human eye. ∙ A. Radiometry ∙ B. Photometry ∙ C. Ophthalmology ∙ D. Optometry

Last Answer : B. Photometry

Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Description : Most fiber optic light sources emit light in which spectrum? ∙ A. visible ∙ B. infrared ∙ C. ultraviolet ∙ D. X-ray

Last Answer : B. infrared

The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet

Description : The band of light frequencies that are too low to be seen by the human eye ∙ A. Infrared ∙ B. X-rays ∙ C. Visible ∙ D. Ultraviolet

Last Answer : Ultraviolet

ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm

Description : ange of wavelength of visible light ∙ A. 670 nm to 10^3 nm ∙ B. 440 nm to 540 nm ∙ C. 110 nm to 240 nm ∙ D. 390 nm to 770 nm

Last Answer : D. 390 nm to 770 nm

The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Description : The band of light frequencies to which human eye will respond ∙ A. Infrared ∙ B. Visible light ∙ C. Ultraviolet ∙ D. Cosmic ray

Last Answer : B. Visible light

Which of the following colors is not found in the visible light wave spectrum? ∙ a. Red ∙ b. White ∙ c. Orange ∙ d. Yellow

Description : Which of the following colors is not found in the visible light wave spectrum? ∙ a. Red ∙ b. White ∙ c. Orange ∙ d. Yellow

Last Answer : b. White

Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Description : Most fiber-optic light sources emit light in which spectrum? ∙ a. Visible ∙ b. Infrared ∙ c. Ultraviolet ∙ d. X-ray

Last Answer : ∙ b. Infrared

The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm

Description : The wavelength of visible light extends from ∙ a. 0.8 to 1.0 nm ∙ b. 400 to 750 nm ∙ c. 200 to 660 nm ∙ d. 700 to 1200 nm

Last Answer : b. 400 to 750 nm

Which laser emits light in the visible range 400 to 700 nm? ∙ a. Argon-ion ∙ b. Nitrogen ∙ c. Carbon-dioxide ∙ d. Neodymium-YAG

Description : Which laser emits light in the visible range 400 to 700 nm? ∙ a. Argon-ion ∙ b. Nitrogen ∙ c. Carbon-dioxide ∙ d. Neodymium-YAG

Last Answer : a. Argon-ion

The band of light wavelengths that are too short to be seen by the human eye ∙ a. Amber ∙ b. Visible ∙ c. Infrared ∙ d. Ultraviolet

Description : The band of light wavelengths that are too short to be seen by the human eye ∙ a. Amber ∙ b. Visible ∙ c. Infrared ∙ d. Ultraviolet

Last Answer : c. Infrared

The band of light wavelengths that are too long to be seen by the human eye ∙ a. Amber ∙ b. Visible ∙ c. Infrared ∙ d. Ultraviolet

Description : The band of light wavelengths that are too long to be seen by the human eye ∙ a. Amber ∙ b. Visible ∙ c. Infrared ∙ d. Ultraviolet

Last Answer : c. Infrared

It is a science of measuring light throughout the entire electromagnetic spectrum ∙ A. Radiometry ∙ B. Photometry ∙ C. Ophthalmology ∙ D. Optometry

Description : It is a science of measuring light throughout the entire electromagnetic spectrum ∙ A. Radiometry ∙ B. Photometry ∙ C. Ophthalmology ∙ D. Optometry

Last Answer : A. Radiometry

A dielectric waveguide for the propagation of electromagnetic energy at light frequencies ∙ a. Stripline ∙ b. Microstrip ∙ c. Laser beam ∙ d. Fiber optics

Description : A dielectric waveguide for the propagation of electromagnetic energy at light frequencies ∙ a. Stripline ∙ b. Microstrip ∙ c. Laser beam ∙ d. Fiber optics

Last Answer : d. Fiber optics

Which is the proper measurement of average power emitted by a pulsed laser? ∙ a. Energy x time ∙ b. Pulse energy x repetition rate ∙ c. Pulse energy / repetition rate ∙ d. Peak power x pulse length

Description : Which is the proper measurement of average power emitted by a pulsed laser? ∙ a. Energy x time ∙ b. Pulse energy x repetition rate ∙ c. Pulse energy / repetition rate ∙ d. Peak power x pulse length

Last Answer : ∙ b. Pulse energy x repetition rate

In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these

Description : In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these

Last Answer : ∙ a. Cladding boundary at high angle

It is described as the flow of light energy past a given point in a specified time ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power

Description : It is described as the flow of light energy past a given point in a specified time ∙ A. Optical radiation ∙ B. Optical impedance ∙ C. Optical illusion ∙ D. Optical power

Last Answer : D. Optical power

The wavelength of a visible extends from ∙ A. 0.8 to 1.6 um ∙ B. 400 to 750 nm ∙ C. 200 to 660 nm ∙ D. 700 to 1200 nm

Description : The wavelength of a visible extends from ∙ A. 0.8 to 1.6 um ∙ B. 400 to 750 nm ∙ C. 200 to 660 nm ∙ D. 700 to 1200 nm

Last Answer : B. 400 to 750 nm

Which of the following is not a part of the optical spectrum? ∙ A. infrared ∙ B. ultraviolet ∙ C. visible color ∙ D. x-rays

Description : Which of the following is not a part of the optical spectrum? ∙ A. infrared ∙ B. ultraviolet ∙ C. visible color ∙ D. x-rays

Last Answer : ∙ D. x-rays

Which of the following is not part of the optical spectrum? ∙ a. Infrafed ∙ b. Ultraviolet ∙ c. Visible color ∙ d. X-rays

Description : Which of the following is not part of the optical spectrum? ∙ a. Infrafed ∙ b. Ultraviolet ∙ c. Visible color ∙ d. X-rays

Last Answer : ∙ d. X-rays

Single frequency light is called ∙ A. pure ∙ B. intense ∙ C. coherent ∙ D. monochromatic

Description : Single frequency light is called ∙ A. pure ∙ B. intense ∙ C. coherent ∙ D. monochromatic

Last Answer : D. monochromatic

Single-frequency light is called ∙ a. Pure ∙ b. Intense ∙ c. Coherent ∙ d. Monochromatic

Description : Single-frequency light is called ∙ a. Pure ∙ b. Intense ∙ c. Coherent ∙ d. Monochromatic

Last Answer : d. Monochromatic

The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz

Description : The laser frequency when the light has the wavelength 800 nm is ∙ a. 375 x 1012 Hz ∙ b. 475 x 1015 Hz ∙ c. 375 x 109 Hz ∙ d. 375 x 1018 Hz

Last Answer : d. 375 x 1018 Hz

When a beam of light enters one medium from another, which quantity will not change? ∙ a. Direction ∙ b. Speed ∙ c. Frequency ∙ d. Wavelength

Description : When a beam of light enters one medium from another, which quantity will not change? ∙ a. Direction ∙ b. Speed ∙ c. Frequency ∙ d. Wavelength

Last Answer : c. Frequency

The process of moving from one energy level to another is called ____________. ∙ A. Spontaneous emission ∙ B. Excited emission ∙ C. Absorption ∙ D. Spontaneous decay

Description : The process of moving from one energy level to another is called ____________. ∙ A. Spontaneous emission ∙ B. Excited emission ∙ C. Absorption ∙ D. Spontaneous decay

Last Answer : C. Absorption

The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion

Description : The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion

Last Answer : b. Absorption and Rayleigh scattering

The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering

Last Answer : A. separating light into its component frequencies

An incident ray can be defined as ∙ A. a light ray reflected from a flat surface ∙ B. a light directed toward a surface ∙ C. a diffused light ray ∙ D. a light ray that happens periodically

Description : An incident ray can be defined as ∙ A. a light ray reflected from a flat surface ∙ B. a light directed toward a surface ∙ C. a diffused light ray ∙ D. a light ray that happens periodically

Last Answer : ∙ B. a light directed toward a surface

Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law

Description : Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law

Last Answer : d. Snell’s law

The quantum of light is called: a. an erg b. an e-v c. a photon d. a phonon

Description : The quantum of light is called: a. an erg b. an e-v c. a photon d. a phonon

Last Answer : c. a photon