The inner portion of the fiberThe inner portion of the fiber cable is called ∙ a. Cladding ∙ b. Coating ∙ c. Inner conductor ∙ d. Core cable is called ∙ a. Cladding ∙ b. Coating ∙ c. Inner conductor ∙ d. Core

The inner portion of the fiber cable is called
∙ a. Cladding  
∙ b. Coating  
∙ c. Inner conductor  
∙ d. Core
by

1 Answer

Answer :

∙ d. Core
by

Related questions

The inner portion of the fiber cable is called a. Cladding b. Coating c. Inner conductor d. Core

Description : The inner portion of the fiber cable is called a. Cladding b. Coating c. Inner conductor d. Core

Last Answer : d. Core

The core of fiber-optic cable is surrounded by ∙ A. wire braid shield ∙ B. Keviar ∙ C. cladding ∙ D. plastic insulation

Description : The core of fiber-optic cable is surrounded by ∙ A. wire braid shield ∙ B. Keviar ∙ C. cladding ∙ D. plastic insulation

Last Answer : ∙ C. cladding

Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Last Answer : ∙ a. 5

A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Last Answer : ∙ A. graded index

A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Last Answer : ∙ C. step-index

What phenomenon will result if the glass fiber is exposed to long periods of high humidity? ∙ A. stress fatigue ∙ B. core corrosion ∙ C. stress corrosion ∙ D. cladding corrosion

Description : What phenomenon will result if the glass fiber is exposed to long periods of high humidity? ∙ A. stress fatigue ∙ B. core corrosion ∙ C. stress corrosion ∙ D. cladding corrosion

Last Answer : stress corrosion

The three essential types of fiber commonly used today except: ∙ A. Plastic core and cladding ∙ B. Plastic core and glass cladding ∙ C. Glass core and glass cladding (SCS) ∙ D. Glass core and plastic cladding (PCS)

Description : The three essential types of fiber commonly used today except: ∙ A. Plastic core and cladding ∙ B. Plastic core and glass cladding ∙ C. Glass core and glass cladding (SCS) ∙ D. Glass core and plastic cladding (PCS)

Last Answer : B. Plastic core and glass cladding

____ is applied to protect core and cladding of the fiber ∙ a. Insulation ∙ b. Fiber insulation ∙ c. Silica ∙ d. Polymer jacket

Description : ____ is applied to protect core and cladding of the fiber ∙ a. Insulation ∙ b. Fiber insulation ∙ c. Silica ∙ d. Polymer jacket

Last Answer : d. Polymer jacket

The core of a fiber optic is surrounded by ∙ a. Wire braid shield ∙ b. Kevlar ∙ c. Cladding ∙ d. Plastic insulation

Description : The core of a fiber optic is surrounded by ∙ a. Wire braid shield ∙ b. Kevlar ∙ c. Cladding ∙ d. Plastic insulation

Last Answer : ∙ c. Cladding

The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding

Description : The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding

Last Answer : c. Higher refractive index than the cladding

Type of bend that occurs as a result of differences in thermal contraction rates between the core and the cladding material. ∙ A. Macrobending ∙ B. Microbending ∙ C. Quad bending ∙ D. Constant-radius bending

Description : Type of bend that occurs as a result of differences in thermal contraction rates between the core and the cladding material. ∙ A. Macrobending ∙ B. Microbending ∙ C. Quad bending ∙ D. Constant-radius bending

Last Answer : B. Microbending

How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372

Description : How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372

Last Answer : D. 372

In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these

Description : In fiber optics, higher-order mode refers to ∙ a. Cladding boundary at high angle ∙ b. Backscattering electromagnetic signals ∙ c. Diffracting signals ∙ d. All of these

Last Answer : ∙ a. Cladding boundary at high angle

The core of a fiber-optic cable is made of ∙ A. air ∙ B. glass ∙ C. diamond ∙ D. quartz

Description : The core of a fiber-optic cable is made of ∙ A. air ∙ B. glass ∙ C. diamond ∙ D. quartz

Last Answer : B. glass

The core of a fiber optic cable is made of ∙ a. Air ∙ b. Glass ∙ c. Diamond ∙ d. Quartz

Description : The core of a fiber optic cable is made of ∙ a. Air ∙ b. Glass ∙ c. Diamond ∙ d. Quartz

Last Answer : b. Glass

The coating in a fiber helps protect fiber from moisture, which reduces the possibility of the occurrence of a detrimental phenomenon called ∙ A. static fatigue ∙ B. mechanical fatigue ∙ C. stress fatigue ∙ D. coating fatigue

Description : The coating in a fiber helps protect fiber from moisture, which reduces the possibility of the occurrence of a detrimental phenomenon called ∙ A. static fatigue ∙ B. mechanical fatigue ∙ C. stress fatigue ∙ D. coating fatigue

Last Answer : ∙ A. static fatigue

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the cone of acceptance should be filled with light. ∙ C. 70 percent of input light should be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Description : EMD is best described by which statement? ∙ A. 70 percent of the core diameter and 70% of the fiber NA should be filled with light. ∙ B. 70 percent of the fiber diameter and 70% of the ... be measured at the output. ∙ D. 70 percent of the unwanted wavelengths should be attenuated by the fiber.

Last Answer : 70 percent of the core diameter and 70% of the fiber NA should be filled with light.

The refractive index number is ∙ A. a number which compares the transparency of a material with that of air ∙ B. a number of assigned by the manufacturer to the fiber in question ∙ C. a number which determines the core diameter ∙ D. a term describing core elasticity

Description : The refractive index number is ∙ A. a number which compares the transparency of a material with that of air ∙ B. a number of assigned by the manufacturer to the fiber in question ∙ C. a number which determines the core diameter ∙ D. a term describing core elasticity

Last Answer : A. a number which compares the transparency of a material with that of air

The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Description : The graded-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.5 ∙ b. 0.05 ∙ c. 0.0005 ∙ d. 5

Last Answer : ∙ a. 0.5

A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Description : A step-index multimode optical fiber has a core diameter of _____ nm. ∙ a. 0.02 ∙ b. 0.2 ∙ c. 2 ∙ d. 0.002

Last Answer : b. 0.2

A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05

Description : A single mode optical fiber has a core diameter of _____ nm. ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.2 ∙ d. 0.05

Last Answer : a. 0.1

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Description : Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Last Answer : . 2 to 15 micrometer

The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations

Last Answer : C. the total power available minus the attenuation losses

Which type of fiber-optic cable is the most widely used? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded index ∙ D. multimode graded index

Description : Which type of fiber-optic cable is the most widely used? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded index ∙ D. multimode graded index

Last Answer : B. multimode step-index

Which of the following is not a major benefit of a fiber-optic cable? ∙ A. immunity from interference ∙ B. no electrical safety problems ∙ C. excellent data security ∙ D. lower cost

Description : Which of the following is not a major benefit of a fiber-optic cable? ∙ A. immunity from interference ∙ B. no electrical safety problems ∙ C. excellent data security ∙ D. lower cost

Last Answer : ∙ D. lower cost

Which of the following is not a common type of fiber-optic cable? ∙ A. single-mode step-index ∙ B. multimode graded-index ∙ C. single-mode graded-index ∙ D. multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? ∙ A. single-mode step-index ∙ B. multimode graded-index ∙ C. single-mode graded-index ∙ D. multimode step-index

Last Answer : . single-mode graded-index

The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption

Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption

Last Answer : A. refraction

A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Description : A popular light wavelength fiber-optic cable is ∙ A. 0.7 micrometer ∙ B. 1.3 micrometer ∙ C. 1.5 micrometer ∙ D. 1.8 micrometer

Last Answer : B. 1.3 micrometer

Which type of fiber optic cable is best for very high speed data? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Description : Which type of fiber optic cable is best for very high speed data? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Last Answer : A. single-mode step-index

For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz

Description : For a 300-m optical fiber cable with a bandwidth distance product of 600 MHz-km, determine the bandwidth. ∙ A. 5 GHz ∙ B. 1 GHz ∙ C. 2 GHz

Last Answer : C. 2 GHz

It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Last Answer : A. Bandwidth Distance Product

Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Description : Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index

Last Answer : A. single-mode step-index

A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable 1000 ft. long is ∙ A. 4.57 dB ∙ B. 9.3 dB ∙ C. 24 dB ∙ D. 49.2 dB

Description : A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable 1000 ft. long is ∙ A. 4.57 dB ∙ B. 9.3 dB ∙ C. 24 dB ∙ D. 49.2 dB

Last Answer : A. 4.57 dB

The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Description : The term single mode and multimode are best described as ∙ A. a number of fibers placed into fiber-optic cable ∙ B. the number of voice channels each fiber can support ∙ C. the number of wavelengths each fiber can support ∙ D. the index number

Last Answer : C. the number of wavelengths each fiber can support

A single fiber can handle as many voice channels as ∙ A. a pair of copper conductors ∙ B. a 1500-pair cable ∙ C. a 500-pair cable ∙ D. a 1000-pair cable

Description : A single fiber can handle as many voice channels as ∙ A. a pair of copper conductors ∙ B. a 1500-pair cable ∙ C. a 500-pair cable ∙ D. a 1000-pair cable

Last Answer : B. a 1500-pair cable

Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Last Answer : b. Light power out of a fiber

Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber

Last Answer : ∙ b. Light power out of a fiber

. A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable, 100 ft long is ∙ a. 4.57 dB ∙ b. 9.3 dB ∙ c. 24 dB ∙ d. 49.2 dB

Description : . A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable, 100 ft long is ∙ a. 4.57 dB ∙ b. 9.3 dB ∙ c. 24 dB ∙ d. 49.2 dB

Last Answer : ∙ a. 4.57 dB

Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Description : Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Last Answer : ∙ a. Single mode step-index

Which type of fiber-optic cable is the best for very high speed data? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Description : Which type of fiber-optic cable is the best for very high speed data? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which type of fiber optic cable is most widely used? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Description : Which type of fiber optic cable is most widely used? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which of the following is not a major benefit of fiber-optic cable? ∙ a. Immunity from interference ∙ b. No electrical safety problems ∙ c. Excellent data security ∙ d. Lower cost

Description : Which of the following is not a major benefit of fiber-optic cable? ∙ a. Immunity from interference ∙ b. No electrical safety problems ∙ c. Excellent data security ∙ d. Lower cost

Last Answer : b. No electrical safety problems

Which of the following is not a common type of fiber-optic cable? ∙ a. Single-mode step-index ∙ b. Multimode graded-index ∙ c. Single-mode graded-index ∙ d. Multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? ∙ a. Single-mode step-index ∙ b. Multimode graded-index ∙ c. Single-mode graded-index ∙ d. Multimode step-index

Last Answer : ∙ a. Single-mode step-index

The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption

Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption

Last Answer : ∙ b. Reflection

Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV

Description : Which of the following is not a common application of fiber-optic cable? ∙ a. Computer networks ∙ b. Long-distance telephone systems ∙ c. Closed circuit TV ∙ d. Consumer TV

Last Answer : d. Consumer TV

Compared to the core, the index of refraction of the cladding must be: a. the same b. greater c. less d. doesn’t have an index of refraction

Description : Compared to the core, the index of refraction of the cladding must be: a. the same b. greater c. less d. doesn’t have an index of refraction

Last Answer : c. less