The inner portion of the fiber cable is called a. Cladding b. Coating c. Inner conductor d. Core

The inner portion of the fiber cable is called
a. Cladding
b. Coating
c. Inner conductor
d. Core
by

1 Answer

Answer :

d. Core
by

Related questions

The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation

Description : The core of a fiber optic is surrounded by a. Wire braid shield b. Kevlar c. Cladding d. Plastic insulation

Last Answer : c. Cladding

The core of an optical fiber has a a. Lower refracted index than air b. Lower refractive index than the cladding c. Higher refractive index than the cladding d. Similar refractive index with the cladding

Description : The core of an optical fiber has a a. Lower refracted index than air b. Lower refractive index than the cladding c. Higher refractive index than the cladding d. Similar refractive index with the cladding

Last Answer : c. Higher refractive index than the cladding

The core of the optical fiber has ______. A. A medium index of refraction B. A lower index of refraction than the cladding C. A lower index of refraction than air D. A higher index of refraction than the cladding

Description : The core of the optical fiber has ______. A. A medium index of refraction B. A lower index of refraction than the cladding C. A lower index of refraction than air D. A higher index of refraction than the cladding

Last Answer : D. A higher index of refraction than the cladding

______ cables arecomposed ofa glass or plastic inner core surrounded by cladding, allencasedin an outside jacket. A) CoaxiaB) Fiber-optic C) Twisted-pair D) none of the abovel

Description : ______ cables arecomposed ofa glass or plastic inner core surrounded by cladding, allencasedin an outside jacket. A) Coaxial B) Fiber-optic C) Twisted-pair D) none of the above

Last Answer : Fiber-optic

……cables are composed of a glass or plastic inner core surrounded by cladding,all encased in an outside jacket. a. Fiber-optic b. Coaxial c. Shield Twisted Pair d. Unshield Twisted-pair

Description : ……cables are composed of a glass or plastic inner core surrounded by cladding,all encased in an outside jacket. a. Fiber-optic b. Coaxial c. Shield Twisted Pair d. Unshield Twisted-pair

Last Answer : a. Fiber-optic

The core of fiber-optic cable is surrounded by ∙ A. wire braid shield ∙ B. Keviar ∙ C. cladding ∙ D. plastic insulation

Description : The core of fiber-optic cable is surrounded by ∙ A. wire braid shield ∙ B. Keviar ∙ C. cladding ∙ D. plastic insulation

Last Answer : ∙ C. cladding

Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Description : Optical fibers for telecommunications are typically about _____ mils thick and consists of a glass core, a glass cladding of lower index of refraction, and a protective coating ∙ a. 5 ∙ b. 6 ∙ c. 7 ∙ d. 8

Last Answer : ∙ a. 5

The core of a fiber optic cable is made of a. Air b. Glass c. Diamond d. Quartz

Description : The core of a fiber optic cable is made of a. Air b. Glass c. Diamond d. Quartz

Last Answer : b. Glass

In an optical fiber, the inner coreis _______ the cladding. A) denser than B) less dense than C) the samedensityas D) another name for

Description : In an optical fiber, the inner coreis _______ the cladding. A) denser than B) less dense than C) the samedensityas D) another name for

Last Answer : denser than

______ cable consists of an inner copper core and asecond conductingouter sheath. A) Twisted-pair B) Coaxial C) Fiber-optic D) Shielded twisted-pair

Description : ______ cable consists of an inner copper core and asecond conductingouter sheath. A) Twisted-pair B) Coaxial C) Fiber-optic D) Shielded twisted-pair

Last Answer : Coaxial

ECE Board Exam March 1996 That dielectric material of an optical fiber surrounding the core A. Cladding B. Armor C. Shield D. Cover in

Description : ECE Board Exam March 1996 That dielectric material of an optical fiber surrounding the core A. Cladding B. Armor C. Shield D. Cover

Last Answer : A. Cladding

Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Description : Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Last Answer : To increase performance and reduce cost

As the core and cladding modes travel along the fiber, mode coupling occurs. What is mode coupling?

Description : As the core and cladding modes travel along the fiber, mode coupling occurs. What is mode coupling?

Last Answer : Mode coupling is the exchange of power between two modes.

A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index

Last Answer : ∙ A. graded index

A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode

Last Answer : ∙ C. step-index

What phenomenon will result if the glass fiber is exposed to long periods of high humidity? ∙ A. stress fatigue ∙ B. core corrosion ∙ C. stress corrosion ∙ D. cladding corrosion

Description : What phenomenon will result if the glass fiber is exposed to long periods of high humidity? ∙ A. stress fatigue ∙ B. core corrosion ∙ C. stress corrosion ∙ D. cladding corrosion

Last Answer : stress corrosion

The three essential types of fiber commonly used today except: ∙ A. Plastic core and cladding ∙ B. Plastic core and glass cladding ∙ C. Glass core and glass cladding (SCS) ∙ D. Glass core and plastic cladding (PCS)

Description : The three essential types of fiber commonly used today except: ∙ A. Plastic core and cladding ∙ B. Plastic core and glass cladding ∙ C. Glass core and glass cladding (SCS) ∙ D. Glass core and plastic cladding (PCS)

Last Answer : B. Plastic core and glass cladding

____ is applied to protect core and cladding of the fiber ∙ a. Insulation ∙ b. Fiber insulation ∙ c. Silica ∙ d. Polymer jacket

Description : ____ is applied to protect core and cladding of the fiber ∙ a. Insulation ∙ b. Fiber insulation ∙ c. Silica ∙ d. Polymer jacket

Last Answer : d. Polymer jacket

The core of a fiber optic is surrounded by ∙ a. Wire braid shield ∙ b. Kevlar ∙ c. Cladding ∙ d. Plastic insulation

Description : The core of a fiber optic is surrounded by ∙ a. Wire braid shield ∙ b. Kevlar ∙ c. Cladding ∙ d. Plastic insulation

Last Answer : ∙ c. Cladding

The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding

Description : The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding

Last Answer : c. Higher refractive index than the cladding

The core refractive index should be lesser than the cladding refractive index for a coaxial cable. State True/False a) True b) False

Description : The core refractive index should be lesser than the cladding refractive index for a coaxial cable. State True/False a) True b) False

Last Answer : b) False

The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86

Description : The numerical aperture of a coaxial cable with core and cladding indices given by 2.33 and 1.4 respectively is a) 3.73 b) 0.83 c) 3.46 d) 1.86

Last Answer : d) 1.86

How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Description : How do you reduce the loss that is produced when light strikes a flat polished end of a fiber optic? A. By painting the surface B. By inclining the surface C. By cooling D. By application of antireflection coating

Last Answer : D. By application of antireflection coating

What is the characteristic impedance of a coaxial line with the following data: inner diameter = 0.2 in., center conductor diameter = 0.06 in., insulation = Teflon. A. 200Ω B. 75Ω C. 50Ω D. 150Ω

Description : What is the characteristic impedance of a coaxial line with the following data: inner diameter = 0.2 in., center conductor diameter = 0.06 in., insulation = Teflon. A. 200Ω B. 75Ω C. 50Ω D. 150Ω

Last Answer : C. 50Ω

Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) portion of the conductor near the surface carries less current and core of the conductor carries more cur¬rent (d) any of the above (e) none of the above

Description : Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) ... core of the conductor carries more cur¬rent (d) any of the above (e) none of the above

Last Answer : (b) portion of the conductor near the surface carries more current and core of the conductor carries less current

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Last Answer : b. Modes

The different angles of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitter is known as ________. A. refraction B. sensor C. mode D. emitter

Description : The different angles of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitter is known as ________. A. refraction B. sensor C. mode D. emitter

Last Answer : C. mode

The inner core ofan optical fiber is _______ in composition. A) glass or plastic B) copper C) bimetallic D) liquid

Description : The inner core ofan optical fiber is _______ in composition. A) glass or plastic B) copper C) bimetallic D) liquid

Last Answer : glass or plastic

The inner core of an optical fiber is in composition. a. copper b. liquid c. glass or plastic d. bimetallic

Description : The inner core of an optical fiber is in composition. a. copper b. liquid c. glass or plastic d. bimetallic

Last Answer : c. glass or plastic

Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber-optic cable is the best for very high speed data? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Description : A popular light wavelength in fiber-optic cable is a. 0.7 um b. 1.3 um c. 1.5 um d. 1.8 um

Last Answer : b. 1.3 um

Which of the following is not a major benefit of fiber-optic cable? a. Immunity from interference b. No electrical safety problems c. Excellent data security d. Lower cost

Description : Which of the following is not a major benefit of fiber-optic cable? a. Immunity from interference b. No electrical safety problems c. Excellent data security d. Lower cost

Last Answer : b. No electrical safety problems

Which of the following is not a common type of fiber-optic cable? a. Single-mode step-index b. Multimode graded-index c. Single-mode graded-index d. Multimode step-index

Description : Which of the following is not a common type of fiber-optic cable? a. Single-mode step-index b. Multimode graded-index c. Single-mode graded-index d. Multimode step-index

Last Answer : c. Single-mode graded-index

The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Description : The operation of the fiber-optic cable is based on the principle of a. Refraction b. Reflection c. Dispersion d. Absorption

Last Answer : b. Reflection

Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Description : Which of the following is not a common application of fiber-optic cable? a. Computer networks b. Long-distance telephone systems c. Closed circuit TV d. Consumer TV

Last Answer : d. Consumer TV

What medium is used by IBM token ring network that operates at either 4 Mbps or 16 Mbps? A. Twisted pair B. Coaxial cable C. Fiber-optic D. Parallel-wire line

Description : What medium is used by IBM token ring network that operates at either 4 Mbps or 16 Mbps? A. Twisted pair B. Coaxial cable C. Fiber-optic D. Parallel-wire line

Last Answer : A. Twisted pair

Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Description : Ho w many times bigger does the bandwidth of a fiber optic multimode have over a cable? A. 50 times bigger B. 100 times bigger C. 10 times bigger D. 5 times bigger

Last Answer : B. 100 times bigger

If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Description : If a fiber optic system has a rise time of 38.55 ns, the source rise time is 12 ns and the detector rise time is 12 ns, what is the cable rise time? A. 34.61 ns B. 14.55 ns C. 52.55 ns D. 26.25 ns

Last Answer : A. 34.61 ns

Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz

Description : Fiber optic cable operates near _______ frequencies. A. 800 THz B. 20 MHz C. 200 MHz D. 2 GHz

Last Answer : A. 800 THz

Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB

Description : Insertion loss of connector-type splices for a single-mode fiber cable. A. 0.2 dB B. 0.3 dB C. 0.09 dB D. 0.38 dB

Last Answer : D. 0.38 dB

If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Description : If a fiber optic system has a rise time of 16 ns, the source rise time is 1.5 ns and the detector rise time is 2 ns, what is the cable rise time? A. 14 ns B. 6 ns C. 9 ns D. 12.5 ns

Last Answer : A. 14 ns

ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Last Answer : B. Communications satellite

A current `i` ampere flows along the inner conductor of a coaxial cable and returns along the outer conductor fo the cable, then the magnetic inductio

Description : A current `i` ampere flows along the inner conductor of a coaxial cable and returns along the outer conductor fo the cable, then the magnetic inductio

Last Answer : A current `i` ampere flows along the inner conductor of a coaxial cable and returns along the outer conductor fo the ... D. `(mu_(0))/(2pi)(2pii)/(r)`

What is the major factor that makes coaxial cable less susceptible to noisethan twisted-pair cable? A) inner conductor B) diameterof cable C) outer conductor D) insulating material

Description : What is the major factor that makes coaxial cable less susceptible to noisethan twisted-pair cable? A) inner conductor B) diameterof cable C) outer conductor D) insulating material

Last Answer : outer conductor

In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Description : In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Last Answer : Cladding material.

Multimode step-index fibers have a core and cladding of constant refractive index n1 and n2, respectively. Which refractive index, the core or cladding, is lower?

Description : Multimode step-index fibers have a core and cladding of constant refractive index n1 and n2, respectively. Which refractive index, the core or cladding, is lower?

Last Answer : Cladding.

Explain the difference between multimode and single mode core-cladding concentricity errors.

Description : Explain the difference between multimode and single mode core-cladding concentricity errors.

Last Answer : Multimode core-cladding concentricity error is the distance between the core and cladding centers expressed as a percentage of core diameter while the single mode core-cladding concentricity error is just the distance between the core and cladding centers

Type of bend that occurs as a result of differences in thermal contraction rates between the core and the cladding material. ∙ A. Macrobending ∙ B. Microbending ∙ C. Quad bending ∙ D. Constant-radius bending

Description : Type of bend that occurs as a result of differences in thermal contraction rates between the core and the cladding material. ∙ A. Macrobending ∙ B. Microbending ∙ C. Quad bending ∙ D. Constant-radius bending

Last Answer : B. Microbending