Description : Ratio of the velocity of propagation of a light ray in free space to the velocity of propagation of a light ray in free space in a given material. ∙ A. refractive index ∙ B. standing wave ratio ∙ C. velocity factor ∙ D. propagation velocity
Last Answer : ∙ A. refractive index
Description : Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number
Last Answer : d. Independence of the propagation constant on the mode number
Description : The refractive index number is ∙ A. a number which compares the transparency of a material with that of air ∙ B. a number of assigned by the manufacturer to the fiber in question ∙ C. a number which determines the core diameter ∙ D. a term describing core elasticity
Last Answer : A. a number which compares the transparency of a material with that of air
Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector
Last Answer : Use a single-mode fiber
Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector
Last Answer : A. using a monochromatic light source
Description : The term critical angle describes ∙ A. the point at which light is refracted ∙ B. the point at which light becomes invisible ∙ C. the point at which light has gone from the refractive mode ... reflective mode ∙ D. the point at which light has crossed the boundary layers from one index to another
Last Answer : C. the point at which light has gone from the refractive mode to the reflective mode ∙
Description : Optical cable testers are used for ∙ a. Checking refractive index ∙ b. Light power out of a fiber ∙ c. Non-calibrated light into a fiber
Last Answer : b. Light power out of a fiber
Last Answer : ∙ b. Light power out of a fiber
Description : ______ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. ∙ a. Material dispersion ∙ b. Wavelength dispersion ∙ c. Modal dispersion
Last Answer : ∙ c. Modal dispersion
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index
Last Answer : A. single-mode step-index
Description : Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number
Last Answer : d. Dependence of the propagation constant on the mode number
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Last Answer : ∙ a. Single mode step-index
Description : What type of fiber has the highest modal dispersion? ∙ a. Step-index multimode ∙ b. Graded index multimode ∙ c. Step-index single mode ∙ d. Graded index mode
Last Answer : a. Step-index multimode
Description : It refers to the abrupt of change in refractive index from core to clad ∙ A. step index ∙ B. graded index ∙ C. semi-graded index ∙ D. half step index
Last Answer : ∙ A. step index
Description : A type of index of an optical fiber that has no cladding and whose central core has a non-uniform refractive index. ∙ A. graded index ∙ B. multimode ∙ C. single mode ∙ D. step-index
Last Answer : ∙ A. graded index
Description : A type of index profile of an optical fiber that has a central core and outside cladding with a uniform refractive index ∙ A. multimode ∙ B. graded index ∙ C. step-index ∙ D. single mode
Last Answer : ∙ C. step-index
Description : It is a graphical representation of the magnitude of the refractive index across the fiber. ∙ A. mode ∙ B. index profile ∙ C. numerical aperture ∙ D. refractive index
Last Answer : B. index profile
Description : How many modes possible with a multimode step-index with a core diameter of 50 um, a core refractive index of 1.6, a cladding refractive index of 1.584, and a wavelength of 1300 nm. ∙ A. 456 ∙ B. 213 ∙ C. 145 ∙ D. 372
Last Answer : D. 372
Description : Refractive index of diamond ∙ a. 1.0 ∙ b. 1.4 ∙ c. 1.8 ∙ d. 2.0
Last Answer : d. 2.0
Description : Refractive index of glass ∙ a. 1.0 ∙ b. 1.2 ∙ c. 1.4 ∙ d. 1.5
Last Answer : ∙ d. 1.5
Description : Which of the following is determined by an OTDR? ∙ a. Distance to trouble ∙ b. Length of fiber ∙ c. Refractive index ∙ d. All of these
Last Answer : d. All of these
Description : The core of an optical fiber has a ∙ a. Lower refracted index than air ∙ b. Lower refractive index than the cladding ∙ c. Higher refractive index than the cladding ∙ d. Similar refractive index with the cladding
Last Answer : c. Higher refractive index than the cladding
Description : The ratio of the speed of light in air to the speed of light in another substance is called ∙ A. speed factor ∙ B. index of reflection ∙ C. index of refraction ∙ D. speed gain
Last Answer : ∙ B. index of reflection
Description : The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant
Last Answer : b. Index of reflection
Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion
Last Answer : D. modal dispersion
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time
Last Answer : D. transit time
Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion
Last Answer : A. modal dispersion
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : Which of the following is not a factor in cable light loss? ∙ A. reflection ∙ B. absorption ∙ C. scattering ∙ D. dispersion
Last Answer : A. reflection
Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.
Last Answer : The amount of external light the fiber will accept is greater.
Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering
Last Answer : A. separating light into its component frequencies
Description : One of the following is not a characteristic of light detectors. ∙ a. Responsitivity ∙ b. Spectral response ∙ c. Transmit time ∙ d. Dispersion
Last Answer : ∙ d. Dispersion
Description : Which of the following is not a factor in cable light loss? ∙ a. Reflection ∙ b. Absorption ∙ c. Scattering ∙ d. Dispersion
Last Answer : ∙ a. Reflection
Description : The upper pulse rate and information carrying capacity of a cable is limited by ∙ a. Pulse shortening ∙ b. Attenuation ∙ c. Light leakage ∙ d. Modal dispersion
Last Answer : ∙ d. Modal dispersion
Description : Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror
Last Answer : a. Splitting of white light into its component colors
Description : Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth
Last Answer : c. Spectral width
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Last Answer : a. Mode
Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation
Last Answer : ∙ d. Attenuation
Description : The higher the index number ∙ A. the higher the speed of light ∙ B. the lower the speed of light ∙ C. has no effect on the speed of light ∙ D. the shorter the wavelength propagation
Last Answer : B. the lower the speed of light
Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption
Last Answer : A. refraction
Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency
Last Answer : A. Bandwidth Distance Product
Description : Reflections in many directions ∙ a. Diffuse reflection ∙ b. Diffraction ∙ c. Scattering ∙ d. Dispersion
Last Answer : a. Diffuse reflection
Description : The bandwidth of a fiber is limited by ∙ a. Mode ∙ b. Wavelength ∙ c. Dispersion ∙ d. Frequency
Last Answer : c. Dispersion
Description : The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion
Last Answer : b. Absorption and Rayleigh scattering
Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption
Last Answer : ∙ b. Reflection
Description : Which type of fiber optic cable is best for very high speed data? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index
Description : Which type of fiber-optic cable is the best for very high speed data? ∙ a. Single-mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Last Answer : a. Single-mode step-index
Description : More than one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode
Last Answer : A. Multimode
Description : Only one path for light rays to take down the fiber ∙ A. Multimode ∙ B. Step-index ∙ C. Single mode ∙ D. Graded index
Last Answer : C. Single mode
Description : Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ ... determined partly by a and b ∙ D. The angle is determined by the index of the materials
Last Answer : ∙ D. The angle is determined by the index of the materials