Description : Which of the following is not a factor in cable light loss? ∙ a. Reflection ∙ b. Absorption ∙ c. Scattering ∙ d. Dispersion
Last Answer : ∙ a. Reflection
Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation
Last Answer : ∙ d. Attenuation
Description : The dominant loss mechanisms in silica fiber are ∙ a. Absorption and radiation losses ∙ b. Absorption and Rayleigh scattering ∙ c. Coupling and radiation losses ∙ d. Radiation and modal dispersion
Last Answer : b. Absorption and Rayleigh scattering
Description : The operation of a fiber-optic cable is based on the principle of ∙ A. refraction ∙ B. reflection ∙ C. dispersion ∙ D. absorption
Last Answer : A. refraction
Description : The operation of the fiber-optic cable is based on the principle of ∙ a. Refraction ∙ b. Reflection ∙ c. Dispersion ∙ d. Absorption
Last Answer : ∙ b. Reflection
Description : Reflections in many directions ∙ a. Diffuse reflection ∙ b. Diffraction ∙ c. Scattering ∙ d. Dispersion
Last Answer : a. Diffuse reflection
Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion
Last Answer : A. modal dispersion
Description : The term dispersion describes the process of ∙ A. separating light into its component frequencies ∙ B. reflecting light from a smooth surface ∙ C. the process by which light is absorbed by an uneven rough surface ∙ D. light scattering
Last Answer : A. separating light into its component frequencies
Description : What is a specific path the light takes in an optical fiber corresponding to a certain angle and number of reflection ∙ a. Mode ∙ b. Grade ∙ c. Numerical Aperture ∙ d. Dispersion
Last Answer : a. Mode
Description : Results in reduction in the power of light wave as it travels down the cable. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss
Last Answer : A. power loss
Description : The upper pulse rate and information-carrying capacity of a cable is limited by ∙ A. pulse shortening ∙ B. attenuation ∙ C. light leakage ∙ D. modal dispersion
Last Answer : D. modal dispersion
Description : The upper pulse rate and information carrying capacity of a cable is limited by ∙ a. Pulse shortening ∙ b. Attenuation ∙ c. Light leakage ∙ d. Modal dispersion
Last Answer : ∙ d. Modal dispersion
Description : Scattering causes: a. loss b. dispersion c. inter symbol interference d. all of the above
Last Answer : a. loss
Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency
Last Answer : A. Bandwidth Distance Product
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ A. single-mode step-index ∙ B. multimode step-index ∙ C. single-mode graded-index ∙ D. multimode graded-index
Last Answer : A. single-mode step-index
Description : Which type of fiber-optic cable has the least modal dispersion? ∙ a. Single mode step-index ∙ b. Multimode step-index ∙ c. Single-mode graded-index ∙ d. Multimode graded-index
Last Answer : ∙ a. Single mode step-index
Description : The ratio of the speed of light in air to the speed of light in another substance is called ∙ A. speed factor ∙ B. index of reflection ∙ C. index of refraction ∙ D. speed gain
Last Answer : ∙ B. index of reflection
Description : The ratio of speed of light in air to the speed of light in another substance is called the ∙ a. Speed factor ∙ b. Index of reflection ∙ c. Index of refraction ∙ d. Dielectric constant
Last Answer : b. Index of reflection
Description : It is analogous to power dissipation to copper cables, impurities in the fiber absorb the light and covert it to heat. ∙ A. power loss ∙ B. absorption loss ∙ C. resistive loss ∙ D. heat loss
Last Answer : B. absorption loss
Description : ________ is the result of photons of light that are absorbed by the atoms of the glass core molecules ∙ a. Ion resonance absorption ∙ b. Ultraviolet absorption ∙ c. Infrared absorption ∙ d. Absorption loss
Last Answer : c. Infrared absorption
Description : For a single mode optical cable with 0.25 dB/km loss, determine the optical power 100 km from a 0.1-mW light source. ∙ A. -45 dBm ∙ B. -15 dBm ∙ C. -35 dBm
Last Answer : ∙ C. -35 dBm
Description : The time it takes a light induced carrier travel across the depletion region of the semiconductor. ∙ A. dispersion ∙ B. response time ∙ C. irradiance ∙ D. transit time
Last Answer : D. transit time
Description : How can modal dispersion reduced entirely? ∙ A. Use a graded index fiber ∙ B. Use a single-mode fiber ∙ C. Use a monochromatic light source ∙ D. Use a very sensitive light detector
Last Answer : Use a single-mode fiber
Description : Chromatic dispersion can be eliminated by __________. ∙ A. using a monochromatic light source ∙ B. using a very small numerical aperture fiber ∙ C. using a graded-index fiber ∙ D. using a very sensitive photo detector
Last Answer : A. using a monochromatic light source
Description : Light rays that are emitted simultaneously from an LED and propagated down an optical fiber do not arrive at the far end of the fiber at the same time results to ∙ A. intramodal dispersion ∙ B. pulse length dispersion ∙ C. modal dispersion ∙ D. wavelength dispersion
Last Answer : D. wavelength dispersion
Description : The effect of a large magnitude of the numerical aperture ∙ A. The amount of external light the fiber will accept is greater. ∙ B. The amount of external light the fiber will accept is less. ... The amount of modal dispersion will be less. ∙ D. The amount of chromatic dispersion will be greater.
Last Answer : The amount of external light the fiber will accept is greater.
Description : The ratio of the speed of light in a vacuum and the speed of light in the material used. ∙ a. S/N ratio ∙ b. Refractive index ∙ c. Intermodal dispersion ∙ d. Monomode ratio
Last Answer : b. Refractive index
Description : One of the following is not a characteristic of light detectors. ∙ a. Responsitivity ∙ b. Spectral response ∙ c. Transmit time ∙ d. Dispersion
Last Answer : ∙ d. Dispersion
Description : ______ dispersion is caused by the difference in the propagation times of light rays that take different paths down a fiber. ∙ a. Material dispersion ∙ b. Wavelength dispersion ∙ c. Modal dispersion
Last Answer : ∙ c. Modal dispersion
Description : Dispersion is used to describe the ∙ a. Splitting of white light into its component colors ∙ b. Propagation of light in straight lines ∙ c. Bending of a beam of light when it goes from one medium to another ∙ d. Bending of a beam light when it strikes a mirror
Last Answer : a. Splitting of white light into its component colors
Description : Is the width of the range of wavelengths emitted by the light source ∙ a. Bandwidth ∙ b. Chromatic Dispersion ∙ c. Spectral width ∙ d. Beamwidth
Last Answer : c. Spectral width
Description : Which of the following factor does not harm laser efficiency? ∙ a. Atmospheric absorption ∙ b. Excitation energy not absorbed ∙ c. Problems in depopulating the lower laser level ∙ d. Inefficiency in populating the upper laser level
Last Answer : ∙ a. Atmospheric absorption
Description : Refraction is the ∙ A. bending of light ∙ B. reflection of light waves ∙ C. distortion of light waves ∙ D. diffusion of light waves
Last Answer : A. bending of light
Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ A. less than ∙ B. greater than ∙ C. equal to ∙ D. zero
Last Answer : ∙ B. greater than
Description : Light traveling in optical fiber follows which of the following principles. ∙ a. Huygen’s principle ∙ b. Reflection theory ∙ c. Light theory ∙ d. Snell’s law
Last Answer : d. Snell’s law
Description : Refraction is the ∙ a. Bending of light waves ∙ b. Reflection of light waves ∙ c. Distortion of light waves ∙ d. Diffusion of light waves
Last Answer : a. Bending of light waves
Description : Total internal reflection takes place if the light ray strikes the interface at an angle with what relationship to the critical angle? ∙ a. Less than ∙ b. Grater than ∙ c. Equal to ∙ d. Zer
Last Answer : ∙ b. Grater than
Description : The wavelength of light has no role in ∙ a. Diffraction ∙ b. Interference ∙ c. Polarization ∙ d. Reflection
Last Answer : c. Polarization
Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation
Last Answer : d. Attenuation
Description : The term power budgeting refers to ∙ A. the cost of cable, connectors, equipment and installation ∙ B. the loss of power due to defective components ∙ C. the total power available minus the attenuation losses ∙ D. the comparative costs of fiber and copper installations
Last Answer : C. the total power available minus the attenuation losses
Description : Cable attenuation is usually expressed in terms of ∙ A. loss per foot ∙ B. dB/km ∙ C. intensity per mile ∙ D. voltage drop per inch
Last Answer : . dB/km
Description : A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable 1000 ft. long is ∙ A. 4.57 dB ∙ B. 9.3 dB ∙ C. 24 dB ∙ D. 49.2 dB
Last Answer : A. 4.57 dB
Description : . A fiber-optic cable has a loss of 15 dB/km. The attenuation in a cable, 100 ft long is ∙ a. 4.57 dB ∙ b. 9.3 dB ∙ c. 24 dB ∙ d. 49.2 dB
Last Answer : ∙ a. 4.57 dB
Description : Cable attenuation is usually expressed in terms of ∙ a. Loss per foot ∙ b. dB/km ∙ c. intensity per mile ∙ d. voltage drop per inch
Last Answer : ∙ b. dB/km
Description : It is caused by hydroxide ions in the material ∙ A. visible light absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. ion resonance absorption
Last Answer : D. ion resonance absorption
Description : t is a result of photons of light that are absorbed by the atoms of the glass core molecule. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption
Last Answer : B. infrared absorption
Description : It is caused by valence electrons in the silica material from which the fiber are manufactured. ∙ A. ion resonance absorption ∙ B. infrared absorption ∙ C. ultraviolet absorption ∙ D. visible light absorption
Last Answer : ultraviolet absorption
Description : The following are the cause of light attenuation in fiber optics except ∙ a. Backscattering ∙ b. Absorption ∙ c. Refraction ∙ d. Microbends
Last Answer : c. Refraction
Description : The bandwidth of a fiber is limited by ∙ a. Mode ∙ b. Wavelength ∙ c. Dispersion ∙ d. Frequency
Last Answer : c. Dispersion
Description : Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number
Last Answer : d. Dependence of the propagation constant on the mode number