What is the basic unit for measuring current flow?

What is the basic unit for measuring current flow?
by

1 Answer

Answer :

ampere
by

Related questions

Decreasing the value of the shunt resistor of an ammeter, it current measuring capability

Description : Decreasing the value of the shunt resistor of an ammeter, it current measuring capability

Last Answer : increases

An instrument used for measuring the amount of current flowing in a circuit.

Description : An instrument used for measuring the amount of current flowing in a circuit.

Last Answer : ammeter

Draw a potentiometer temp. Measuring circuits and explain its?

Description : Draw a potentiometer temp. Measuring circuits and explain its?  

Last Answer : OPERATION : The input to the instrument is a measurement of some in the processes using a sensing element ( such as thermocouple ) or a device to produce direct voltage, which is the voltage (signal) ... to zero results ( null point ) the balancing ( servo motor is be longer driven )   

What are the primary elements for measuring pressure ?

Description : What are the primary elements for measuring pressure ?

Last Answer : The primary elements used for measuring pressure are : Bourdon tube. Diaphragm. Capsule. Bellows. Pressure Springs. The above are known as elastic deformation pressure elements. Type ... pressure. Pre.spring : Pressure springs of helical or spiral shape used for measuring high pressures.

What ammeter is mostly used in measuring high frequency currents?

Description : What ammeter is mostly used in measuring high frequency currents?

Last Answer : thermocouple

A four-arm bridge. All arms of which are predominantly resistive; used for measuring resistance

Description : A four-arm bridge. All arms of which are predominantly resistive; used for measuring resistance

Last Answer : Resistance Bridge and Wheatstone Bridge

An electronic measuring device that provide instantaneous visual indication of voltage excursions

Description : An electronic measuring device that provide instantaneous visual indication of voltage excursions

Last Answer : oscilloscope

Resistance measuring instrument particularly used in determining the insulation resistance

Description : Resistance measuring instrument particularly used in determining the insulation resistance

Last Answer : Megger/Megaohmmeter

___ is used for measuring medium Q coils

Description : ___ is used for measuring medium Q coils

Last Answer : Maxwell Bridge

This refers to a four-arm ac bridge used for measuring inductance against a standard capacitance.

Description : This refers to a four-arm ac bridge used for measuring inductance against a standard capacitance.

Last Answer : Maxwell Bridge

What is that instrument used for measuring the strength and direction of magnetic fields?

Description : What is that instrument used for measuring the strength and direction of magnetic fields?

Last Answer : magnetometer

Majority of analog measuring instrument utilizes one of the following effects.

Description : Majority of analog measuring instrument utilizes one of the following effects.

Last Answer : magnetic effect

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

A common technique for measuring power at high frequency is to ______

Description : A common technique for measuring power at high frequency is to ______

Last Answer : employ a sensing element that converts the RF power to a measureable dc or low-frequency signal

Which of the voltmeter is used for measuring high direct voltage (say 10kV)?

Description : Which of the voltmeter is used for measuring high direct voltage (say 10kV)?

Last Answer : electrostatic

To increase the measuring capability of a moving-iron ac ammeter, a __ should be used.

Description : To increase the measuring capability of a moving-iron ac ammeter, a __ should be used.

Last Answer : different number of turns of coils

Meters with moving coil are normally used for measuring ____

Description : Meters with moving coil are normally used for measuring ____

Last Answer : dc only

One of the basic functions of electronic circuit is

Description : One of the basic functions of electronic circuit is

Last Answer : the generation and manipulation of electronic waveshapes

Which of the following is not a basic part of a CRT?

Description : Which of the following is not a basic part of a CRT?

Last Answer : sawtooth generator

Why flow is measured in square root?

Description : Why flow is measured in square root?

Last Answer : Flow varies directly as the square root of different pressure F = K square root of D/P. Since this flow varies as the square root of differential pressure the pen does not directly indicate flow. The flow can be determined by taking the square root of the pen. Say the pen reads 50% of chart.

An operator tells you that flow indication is more, How would you start checking?

Description : An operator tells you that flow indication is more, How would you start checking?

Last Answer : First flushing the transmitter. Flush both the impulse lines. Adjust the zero by equalizing if necessary. If still the indication is more then. • Check L.P. side for choke. If that is clean then. • Check the leaks on L.P. side. If not. • Calibrate the transmitter.

What are the primary elements used for flow measurement?

Description : What are the primary elements used for flow measurement?

Last Answer : The primary elements used for flow measurement are: • Orifice Plate. • Venturi tube. • Pitot tube. • Annubars. • Flow Nozzle. • Weir & Flumes.

What is the constant voltage unit ?

Description : What is the constant voltage unit ?

Last Answer : The constant voltage circuit consists of a rectifier, CR, a filter capacitor C1, followed by two stages of zener regulation. Abridge configuration is provided to 1amp line voltage regulation ... , Thus variations. Resisters R2 and R3 form a bridge that any remoment line voltage effects. 

When should a fuse be replaced with a higher rated unit?

Description : When should a fuse be replaced with a higher rated unit?

Last Answer : never

How much current does an electrostatic voltmeter require through it to operate?

Description : How much current does an electrostatic voltmeter require through it to operate?

Last Answer : zero current

It is the reciprocal of the full-scale current of a meter

Description : It is the reciprocal of the full-scale current of a meter

Last Answer : sensitivity

What is the device, which depends on the action of a movalbe permanent magnet, in aligning itself in the resultant field produced by a fixed permanent magnet or current- carrying coils whose axes are displaced by a fixed angle?

Description : What is the device, which depends on the action of a movalbe permanent magnet, in aligning itself in the resultant field produced by a fixed permanent magnet or current- carrying coils whose axes are displaced by a fixed angle?

Last Answer : moving-magnet instrument

Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

A meter has a full-scale current of 50uA, what is its sensitivity?

Description : A meter has a full-scale current of 50uA, what is its sensitivity?

Last Answer : Is=1/50uA=20kohm/V

In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Description : In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Last Answer : intensity control

An instrument used to detect and measure the presence of electrical current is generally called

Description : An instrument used to detect and measure the presence of electrical current is generally called

Last Answer : galvanometer

All voltmeters except one of the following are operated by the passage of current

Description : All voltmeters except one of the following are operated by the passage of current

Last Answer : electrostatic

A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Description : A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Last Answer : DMM

For a dynamometer to be able to measure high current, a ___ should be used.

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

What is the typical full-scale deflection current of a moving coil instrument?

Description : What is the typical full-scale deflection current of a moving coil instrument?

Last Answer : 50mA

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

What is a filter used for ?

Description : What is a filter used for ?

Last Answer : The half wave and full wave signals are pulsating D . C . voltages. The use of such voltages is limited to charging batteries, running D. C. motors, and a few other applications. What we really ... voltage from a battery. To get a constant voltage from this, we can use a capacitor input filter. 

What is Zener Diode ? What is a voltage Regulator ?

Description : What is Zener Diode ? What is a voltage Regulator ?

Last Answer : The breakdown region of a p n diode can be made very sharp and almost vertical Diodes with almost vertical breakdown region are known as Zever Diodes. A Zener diodes operating in the breakdown ... VOLTAGE REGULATOR : The output remains constant despite changes in input voltage due to Zever effect.  

What is transistor ? What are the different types ?

Description : What is transistor ? What are the different types ?

Last Answer : A transistor is a three lagged semi conductor device. Basically a transistor means (transfer - resister). Whether the transistor is pnp or npn it resembles two diodes (back to back). The one of the left ... transistor : Emitter - Base - Forward Bias. Collector - Base - Reverse Bias. 

What is CB, CE and CC configuration ?

Description : What is CB, CE and CC configuration ?

Last Answer : Buffer : A device or a circuit used to isolate two pt'ne circuits or stages. The emitter follows is a example of buffer. Alpha = IC / IE Beta = IC / IB

How will you test a transistor with a multimeter. ?

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results. 

What is a thyristor ? What are its uses ?

Description : What is a thyristor ? What are its uses ?

Last Answer : A thyristor is a special kind of semi conductor device that uses internal feedback to produce latching action. Use : Used for controlling large amounts of load power in motors, heaters, lighting systems etc ... the latches like a open switch. This latch will always stay in open or close position.  

What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ?

Description : What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ? 

Last Answer : The transmitter output stance from what is known as "live zero". This system has specific advantages : 1. The systems automatically alarms when the signal system becomes inoperative. ... transmitter operating, but transmitting a zero measurement and a failure, in the signal system. 

What are Intrinsically safe system ?

Description : What are Intrinsically safe system ?

Last Answer : Intrinsic safety is a technique for designing electrical equipment for safe use in locations made hazardous by the presence of flammable gas or vapors in air. "Defn. :" Intrinsically safe circuit is ... , unfortunately, been adopted in all countries. However two sets of codes in common use are.  

What is feed back control ? What is feed forward control ? Discuss its application ?

Description : What is feed back control ? What is feed forward control ? Discuss its application ?

Last Answer : Feed back control: Feed back control involves the detection of the controlled variable and counteracting of charges its it's value relative to set point, by adjustment of a manipulated ... controller for a particular process application, two factors time and gain must be considered.    

What is Furnace Draft control ?

Description : What is Furnace Draft control ? 

Last Answer : Balanced draft boilers are generally used negative furnace pressure. When both forced draft and induced draft are used together, at some point in the system the pressure will be the same as that of atmosphere. ... have is a very slight (about 0.1" H20 ) negative pressure of the top of furnace.