A meter has a full-scale current of 50uA, what is its sensitivity?

A meter has a full-scale current of 50uA, what is its sensitivity?
by

1 Answer

Answer :

Is=1/50uA=20kohm/V
by

Related questions

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

It is the reciprocal of the full-scale current of a meter

Description : It is the reciprocal of the full-scale current of a meter

Last Answer : sensitivity

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Description : Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Last Answer : magnetic type

What is the typical full-scale deflection current of a moving coil instrument?

Description : What is the typical full-scale deflection current of a moving coil instrument?

Last Answer : 50mA

A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Description : A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Last Answer : DMM

(True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Description : (True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Last Answer : False.

What is the typical full-scale voltage across a moving coil voltmeter?

Description : What is the typical full-scale voltage across a moving coil voltmeter?

Last Answer : 50mV

What is that meter that depends for its operation on the forces attraction and repulsion

Description : What is that meter that depends for its operation on the forces attraction and repulsion

Last Answer : electrostatic instrument

An electrodynamic meter used t measure power

Description : An electrodynamic meter used t measure power

Last Answer : wattmeter

Type of power-line frequency meter composed of vibrating iron reed placed in alternating magnetic field

Description : Type of power-line frequency meter composed of vibrating iron reed placed in alternating magnetic field

Last Answer : Vibrating Reed Type

The only use of voltage senstive meter movement

Description : The only use of voltage senstive meter movement

Last Answer : very low voltage measurement

When the meter is unsufficiently damped, it is considered as ___

Description : When the meter is unsufficiently damped, it is considered as ___

Last Answer : underdamped

Calculate the series resistance needed to convert a D' Arsonval meter with FSD of 100uA and a meter resistance of 1kohm to a voltmeter with 10V FSD.

Description : Calculate the series resistance needed to convert a D' Arsonval meter with FSD of 100uA and a meter resistance of 1kohm to a voltmeter with 10V FSD.

Last Answer : Rs=10V/100uA - 1kohm = 99kohm

A meter when __ will become insensitive to small signals

Description : A meter when __ will become insensitive to small signals

Last Answer : overdamped

Insulation resistance is measured by which meter?

Description : Insulation resistance is measured by which meter?

Last Answer : megger

Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Description : Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Last Answer : instrument errors

A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Description : A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Last Answer : dip meter

What is the most common type of meter movement?

Description : What is the most common type of meter movement?

Last Answer : D' Arsonval

In meter movement, how do oyu prevent the meter from oscillating and overswing?

Description : In meter movement, how do oyu prevent the meter from oscillating and overswing?

Last Answer : by damping

What type of instrument is the watt-hour meter?

Description : What type of instrument is the watt-hour meter?

Last Answer : an integrating

Calculate the shunt resistance needed to increase the FSD of an ammeter 5 times if the meter resistance is 1kohm

Description : Calculate the shunt resistance needed to increase the FSD of an ammeter 5 times if the meter resistance is 1kohm

Last Answer : 250ohms

___ meter is the most sensitive

Description : ___ meter is the most sensitive

Last Answer : 1uA

For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Description : For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Last Answer : vertical

The scale of a hot-wire instrument is a/an ___function

Description : The scale of a hot-wire instrument is a/an ___function

Last Answer : squared

Moving-iron instrument has a/an scale

Description : Moving-iron instrument has a/an scale

Last Answer : squared

Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Description : Most AC voltmeters have an rms scale which is valid only if the input signal being measured is a __ signal.

Last Answer : sinusoidal

For time measurements, ___ scale of the scope is used.

Description : For time measurements, ___ scale of the scope is used.

Last Answer : horizontal

What is the reason why the scale of a permanent-magnet moving coil instrument is uniform?

Description : What is the reason why the scale of a permanent-magnet moving coil instrument is uniform?

Last Answer : because it is spring controlled

Indicating instrument is assumed to be most accurate at what part of the scale?

Description : Indicating instrument is assumed to be most accurate at what part of the scale?

Last Answer : at half or full

On a simple ohmmeter, the 0 ohm(s0 mark is located __ of the scale

Description : On a simple ohmmeter, the 0 ohm(s0 mark is located __ of the scale

Last Answer : at far right

How much current does an electrostatic voltmeter require through it to operate?

Description : How much current does an electrostatic voltmeter require through it to operate?

Last Answer : zero current

What is the device, which depends on the action of a movalbe permanent magnet, in aligning itself in the resultant field produced by a fixed permanent magnet or current- carrying coils whose axes are displaced by a fixed angle?

Description : What is the device, which depends on the action of a movalbe permanent magnet, in aligning itself in the resultant field produced by a fixed permanent magnet or current- carrying coils whose axes are displaced by a fixed angle?

Last Answer : moving-magnet instrument

Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Description : In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Last Answer : intensity control

Decreasing the value of the shunt resistor of an ammeter, it current measuring capability

Description : Decreasing the value of the shunt resistor of an ammeter, it current measuring capability

Last Answer : increases

An instrument used to detect and measure the presence of electrical current is generally called

Description : An instrument used to detect and measure the presence of electrical current is generally called

Last Answer : galvanometer

All voltmeters except one of the following are operated by the passage of current

Description : All voltmeters except one of the following are operated by the passage of current

Last Answer : electrostatic

For a dynamometer to be able to measure high current, a ___ should be used.

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

What is the basic unit for measuring current flow?

Description : What is the basic unit for measuring current flow?

Last Answer : ampere

An instrument used for measuring the amount of current flowing in a circuit.

Description : An instrument used for measuring the amount of current flowing in a circuit.

Last Answer : ammeter

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

A dc voltmeter has a sensitivity of 1000 Ohm/V. When it measures half full scale in 100 V range, the current ...

Description : A dc voltmeter has a sensitivity of 1000 Ohm/V. When it measures half full scale in 100 V range, the current through the voltmeter is

Last Answer : A dc voltmeter has a sensitivity of 1000 Ohm/V. When it measures half full scale in 100 V range, the current through the voltmeter is 1 mA.

What is a thyristor ? What are its uses ?

Description : What is a thyristor ? What are its uses ?

Last Answer : A thyristor is a special kind of semi conductor device that uses internal feedback to produce latching action. Use : Used for controlling large amounts of load power in motors, heaters, lighting systems etc ... the latches like a open switch. This latch will always stay in open or close position.  

What is feed back control ? What is feed forward control ? Discuss its application ?

Description : What is feed back control ? What is feed forward control ? Discuss its application ?

Last Answer : Feed back control: Feed back control involves the detection of the controlled variable and counteracting of charges its it's value relative to set point, by adjustment of a manipulated ... controller for a particular process application, two factors time and gain must be considered.    

Draw a potentiometer temp. Measuring circuits and explain its?

Description : Draw a potentiometer temp. Measuring circuits and explain its?  

Last Answer : OPERATION : The input to the instrument is a measurement of some in the processes using a sensing element ( such as thermocouple ) or a device to produce direct voltage, which is the voltage (signal) ... to zero results ( null point ) the balancing ( servo motor is be longer driven )   

What do you call an oscilloscope that uses sampling techniques in processing signals having frequencies beyond its normal capabilities?

Description : What do you call an oscilloscope that uses sampling techniques in processing signals having frequencies beyond its normal capabilities?

Last Answer : sampling oscilloscope

What do you call of an instrument that depends for its operation on the reaction between magnetic flux set up by currents in fixed windings and other currents set up by electromagnet induction in movable conducting parts?

Description : What do you call of an instrument that depends for its operation on the reaction between magnetic flux set up by currents in fixed windings and other currents set up by electromagnet induction in movable conducting parts?

Last Answer : induction instrument

A moving system force in an analog instruments which causes the moving system to deflect from its zero position.

Description : A moving system force in an analog instruments which causes the moving system to deflect from its zero position.

Last Answer : deflecting force

A force in analog instrument which quickly brings the moving system to rest in its final position.

Description : A force in analog instrument which quickly brings the moving system to rest in its final position.

Last Answer : damping force