What is the main disadvantage of the rhombic antenna?

What is the main disadvantage of the rhombic antenna?
by

1 Answer

Answer :

It requires a large antenna site.
by

Related questions

Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Description : Which antenna does not use the ground? A. Marconi B. Yagi C. Hertz D. Rhombic

Last Answer : B. Yagi

The rhombic antenna is primarily used for A. ground wave propagation B. space wave propagation C. ionosphere scatter propagation D. sky wave propagation

Description : The rhombic antenna is primarily used for A. ground wave propagation B. space wave propagation C. ionosphere scatter propagation D. sky wave propagation

Last Answer : D. sky wave propagation

An antenna with unity gain A. Rhombic B. Half-wave dipole C. Isotropic D. Whip

Description : An antenna with unity gain A. Rhombic B. Half-wave dipole C. Isotropic D. Whip

Last Answer : C. Isotropic

Which antenna is a properly terminated? A. Marconi B. Rhombic C. Dipole D. Yagi-Uda

Description : Which antenna is a properly terminated? A. Marconi B. Rhombic C. Dipole D. Yagi-Uda

Last Answer : B. Rhombic

_____ is an open-ended slot antenna A. Helical antenna B. Rhombic antenna C. Notch antenna D. Cassegrain antenna

Description : _____ is an open-ended slot antenna A. Helical antenna B. Rhombic antenna C. Notch antenna D. Cassegrain antenna

Last Answer : C. Notch antenna

_____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Description : _____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Last Answer : A. Antenna array

Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Description : Which is a non-resonant antenna? A. Rhombic antenna B. Folded dipole C. End-fire array D. Yagi-Uda antenna

Last Answer : A. Rhombic antenna

The typical length of the rhombic antenna is ____. A. 2λ to 8λ B. 10λ to 20λ C. 1λ to 3λ D. 5λ to 10λ

Description : The typical length of the rhombic antenna is ____. A. 2λ to 8λ B. 10λ to 20λ C. 1λ to 3λ D. 5λ to 10λ

Last Answer : A. 2λ to 8λ

What antenna can be used to minimize the effect of Faraday rotation of polarization? A. Dipole B. Parabolic C. Helical D. Rhombic

Description : What antenna can be used to minimize the effect of Faraday rotation of polarization? A. Dipole B. Parabolic C. Helical D. Rhombic

Last Answer : C. Helical

What is the typical gain of a rhombic antenna? A. Between 15 to 60 B. Between 20 to 90 C. Between 50 to 75 D. Between 10 to 25

Description : What is the typical gain of a rhombic antenna? A. Between 15 to 60 B. Between 20 to 90 C. Between 50 to 75 D. Between 10 to 25

Last Answer : A. Between 15 to 60

Refers to a type of beam antenna which uses two or more straight elements arranged in line with each other. A. Dipole antenna B. Yagi antenna C. Whip antenna D. Rhombic antenna

Description : Refers to a type of beam antenna which uses two or more straight elements arranged in line with each other. A. Dipole antenna B. Yagi antenna C. Whip antenna D. Rhombic antenna

Last Answer : B. Yagi antenna

Unity gain antenna A. Isotropic B. Rhombic C. Half-wave dipole D. Dummy

Description : Unity gain antenna A. Isotropic B. Rhombic C. Half-wave dipole D. Dummy

Last Answer : A. Isotropic

Which is properly terminated antenna? A. Rhombic B. Hertz C. Marconi D. Dipole

Description : Which is properly terminated antenna? A. Rhombic B. Hertz C. Marconi D. Dipole

Last Answer : A. Rhombic

Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Description : Which is the non-resonant antenna? A. Broadside Antenna B. Folded Dipole C. Rhombic antenna D. End fire array

Last Answer : C. Rhombic antenna

One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Description : One ofthe followingconsistsof nonresonant antennas: a.The rhombic antenna b. The folded dipole c. The end-fire array d. The broadside array

Last Answer : a.The rhombic antenna

What is the main disadvantage of parallel transfer?

Description : What is the main disadvantage of parallel transfer?

Last Answer : Requires more circuitry.

What is the main disadvantage of a conventional full-wave rectifier?

Description : What is the main disadvantage of a conventional full-wave rectifier?

Last Answer : Peak voltage is half that of the half-wave rectifier.

What is the main disadvantage of the conventional full wave rectifier?

Description : What is the main disadvantage of the conventional full wave rectifier?

Last Answer : The peak voltage is half that of a half-wave rectifier.

What is the main disadvantage of PROM?

Description : What is the main disadvantage of PROM?

Last Answer : If a mistake is made and entered, it cannot be corrected or erased.

What is the main disadvantage of a series motor?

Description : What is the main disadvantage of a series motor?

Last Answer : It must have a load connected to avoid damage from excess speed.

What is the main disadvantage of series generators?

Description : What is the main disadvantage of series generators?

Last Answer : Output voltage varies as the load varies

What is the main disadvantage of using fiber-optic cables?

Description : What is the main disadvantage of using fiber-optic cables?

Last Answer : High attenuation.

What is the main disadvantage of pulse-position modulation?

Description : What is the main disadvantage of pulse-position modulation?

Last Answer : It requires synchronization between the transmitter and receiver.

A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Description : A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

Last Answer : A. It will radiate harmonics

What is the disadvantage of using a double receiver instead of two individual receivers?

Description : What is the disadvantage of using a double receiver instead of two individual receivers?

Last Answer : If one of the receivers goes bad the entire unit must be replaced.

Name a disadvantage of sine-wave oscillator synchronizers.

Description : Name a disadvantage of sine-wave oscillator synchronizers.

Last Answer : It requires additional shaping circuits.

Name a disadvantage of sine-wave oscillator synchronizers.

Description : Name a disadvantage of sine-wave oscillator synchronizers.

Last Answer : . It requires additional shaping circuits.

What is the major disadvantage of printed circuit boards?

Description : What is the major disadvantage of printed circuit boards?

Last Answer : Components soldered in place.

What is the major disadvantage of an fm signal as compared to an AM signal?

Description : What is the major disadvantage of an fm signal as compared to an AM signal?

Last Answer : Wide bandpass.

What is a disadvantage of agc?

Description : What is a disadvantage of agc?

Last Answer : Weak signals produce bias, which could result in no usable receiver output.

How is the disadvantage of the Gramme-ring armature overcome in the drum-wound armature?

Description : How is the disadvantage of the Gramme-ring armature overcome in the drum-wound armature?

Last Answer : By winding the armature in a way that places the entire coil where it is exposed to maximum flux.

What is a disadvantage of a direct-current system with respect to supply voltage?

Description : What is a disadvantage of a direct-current system with respect to supply voltage?

Last Answer : the dc voltage must be generated at the level required by the load.

What is the primary disadvantage of the pointer arrangement for indicating coil rotation?

Description : What is the primary disadvantage of the pointer arrangement for indicating coil rotation?

Last Answer : Coil balance.

What is the primary disadvantage of the pointer arrangement for indicating coil rotation?

Description : What is the primary disadvantage of the pointer arrangement for indicating coil rotation?

Last Answer : Coil balance.

What is a major disadvantage of a carbon microphone?

Description : What is a major disadvantage of a carbon microphone?

Last Answer : Background hiss resulting from random changes in the resistance between individual carbon granules.

Name a disadvantage of a single-stage cw transmitter.Name a disadvantage of a single-stage cw transmitter.

Last Answer : Antenna-to-ground capacitance can cause the oscillator frequency to vary.

As Rhombic sulphur is heated in a test tube : `{:(,"Process","Temperature"),((a),"Viscosity increases",T_(1)),((b),"Visconsity decrease",T_(2)),((c),"

Description : As Rhombic sulphur is heated in a test tube : `{:(,"Process","Temperature"),((a),"Viscosity increases",T_(1)),((b),"Visconsity decrease",T_(2)),((c),"

Last Answer : As Rhombic sulphur is heated in a test tube : `{:(,"Process","Temperature"),((a),"Viscosity increases",T_(1)),(( ... T_(3) lt T_(4) lt T_(1) lt T_(2)`

As Rhombic sulphur is heated in a test tube : `{:(,"Process","Temperature"),((a),"Viscosity increases",T_(1)),((b),"Visconsity decrease",T_(2)),((c),"

Description : As Rhombic sulphur is heated in a test tube : `{:(,"Process","Temperature"),((a),"Viscosity increases",T_(1)),((b),"Visconsity decrease",T_(2)),((c),"

Last Answer : As Rhombic sulphur is heated in a test tube : `{:(,"Process","Temperature"),((a),"Viscosity increases",T_(1)),(( ... T_(3) lt T_(4) lt T_(1) lt T_(2)`

Assertion (A) Both rhombic and monoclinic sulphur exist as `S_(8)` but oxygen exists as `O_(2)`. Reason (R ) Oxygen forms `ppi-ppi` multiple bond due

Description : Assertion (A) Both rhombic and monoclinic sulphur exist as `S_(8)` but oxygen exists as `O_(2)`. Reason (R ) Oxygen forms `ppi-ppi` multiple bond due

Last Answer : Assertion (A) Both rhombic and monoclinic sulphur exist as `S_(8)` but oxygen exists as `O_ ... Statement-I is not correct and Statement-II is correct

Rhombic sulphur consists of

Description : Rhombic sulphur consists of

Last Answer : Rhombic sulphur consists of A. `S_(8)` chains B. `S_(2)` molecules C. `S_(4)` rings D. `S_(8)` rings

The temp. at which rhombic sulphur and monoclinic sulphur exist in equilibrium is

Description : The temp. at which rhombic sulphur and monoclinic sulphur exist in equilibrium is

Last Answer : The temp. at which rhombic sulphur and monoclinic sulphur exist in equilibrium is A. `98^(@)C` B. `95.5^(@)C` C. `240^(@)C` D. `120^(@)C`

The term ’Rh factor’ refers to - (1) Rhesus factor (2) Rheumatoid factor (3) Renal factor (4) Rhombic factor

Description : The term ’Rh factor’ refers to - (1) Rhesus factor (2) Rheumatoid factor (3) Renal factor (4) Rhombic factor

Last Answer : (1) Rhesus factor Explanation: The Rhesus factor (Rh factor) is an alternate form in each blood group. The factor first discovered by Carl Landsteiner in Rhesus monkey, present in the forest of South Africa.

The term 'Rh factor' refers to - (1) Rhesus factor (2) Rheumatoid factor (3) Renal factor (4) Rhombic factor

Description : The term 'Rh factor' refers to - (1) Rhesus factor (2) Rheumatoid factor (3) Renal factor (4) Rhombic factor

Last Answer : (1) Rhesus factor Explanation: Each person's blood is one of four major types: A, B, AB, or O. Blood types are determined by the types of antigens on the blood cells. Antigens are proteins on ... type of protein on the surface of red blood cells. Most people who have the Rh factor are Rh-positive.

Give reasons : (a) Diamond and rhombic Sulphur are covalent solids, but the latter has lower melting points. (b) Among NaCl and CsCl, CsCl is quite stable.

Description : Give reasons : (a) Diamond and rhombic Sulphur are covalent solids, but the latter has lower melting points. (b) Among NaCl and CsCl, CsCl is quite stable.

Last Answer : (a) Due to weak Vander Waal’s Force in Sulphur molecule. (b) CsCl coordination number is 8. It is surrounded by 8 anion tightly. 

Which form of sulphur is the most stable at room temperature? (A) Plastic (B) Monoclinic (C) Rhombic (D) Flowers of sulphur

Description : Which form of sulphur is the most stable at room temperature? (A) Plastic (B) Monoclinic (C) Rhombic (D) Flowers of sulphur

Last Answer : (C) Rhombic

Which allotrope of sulphur is insoluble in carbon disulphide? (A) Rhombic sulphur (B) Monoclinic sulphur (C) Plastic sulphur (D) Milk of sulphur

Description : Which allotrope of sulphur is insoluble in carbon disulphide? (A) Rhombic sulphur (B) Monoclinic sulphur (C) Plastic sulphur (D) Milk of sulphur

Last Answer : (C) Plastic sulphur

The term ‘Rh factor’ refers to (1) Rhesus factor (2) Rheumatoid factor (3) Renal factor (4) Rhombic factor

Description : The term ‘Rh factor’ refers to (1) Rhesus factor (2) Rheumatoid factor (3) Renal factor (4) Rhombic factor

Last Answer : Rhesus factor

What composite field (composed of E and H fields) is found stored in the antenna?

Description : What composite field (composed of E and H fields) is found stored in the antenna?

Last Answer : Induction field.

Which two composite fields (composed of E and H fields) are associated with every antenna?

Description : Which two composite fields (composed of E and H fields) are associated with every antenna?

Last Answer : Induction field and radiation field.

If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.