A disadvantage of using a trap antenna. A. It will radiate harmonics B. It can only be used for single-bad operation C. It is too sharply directional at lower frequencies D. It must be neutralized

A disadvantage of using a trap antenna.
A. It will radiate harmonics
B. It can only be used for single-bad operation
C. It is too sharply directional at lower frequencies
D. It must be neutralized
by

1 Answer

Answer :

A. It will radiate harmonics
by

Related questions

The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Description : The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Last Answer : A. interval

Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Description : Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Last Answer : D. To prevent re-radiation of the local oscillator

Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Description : Stacking antenna elements A. increases sensitivity to weak signals B. will suppress odd harmonics C. decrease signal to noise ratio D. increases selectivity

Last Answer : A. increases sensitivity to weak signals

The purpose of stacking elements on an antenna. A. Sharper directional pattern B. increased gain C. Improved bandpass D. All of these

Description : The purpose of stacking elements on an antenna. A. Sharper directional pattern B. increased gain C. Improved bandpass D. All of these

Last Answer : D. All of these

______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Last Answer : A. Broadside array

_____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Description : _____ is an antenna with a number of half-wave antenna on it. A. Antenna array B. Tower C. Omni-directional D. Rhombic

Last Answer : A. Antenna array

What is a dummy antenna? A. One which is used as a reference for gain measurements B. And antenna used for hand-held radio C. An non-directional transmitting antenna D. A non-radiating load for a transmitter used for testing

Description : What is a dummy antenna? A. One which is used as a reference for gain measurements B. And antenna used for hand-held radio C. An non-directional transmitting antenna D. A non-radiating load for a transmitter used for testing

Last Answer : D. A non-radiating load for a transmitter used for testing

Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Description : Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Last Answer : C. Major lobe radiation

The polarization of a discone antenna is _____. A. Horizontal B. Vertical C. Omni D. Directional

Description : The polarization of a discone antenna is _____. A. Horizontal B. Vertical C. Omni D. Directional

Last Answer : B. Vertical

Referred to an oscillator signal “leak through” from a properly neutralized amplifier such as a master oscillator power amplifier. A. Carrier B. Stray signal C. Back wave D. Loss wave

Description : Referred to an oscillator signal “leak through” from a properly neutralized amplifier such as a master oscillator power amplifier. A. Carrier B. Stray signal C. Back wave D. Loss wave

Last Answer : C. Back wave

What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Description : What is meant by the term radiation resistance for an antenna? A. The resistance in the trap coils to received signal B. An equivalent resistance that would dissipate the same amount of power as ... antenna C. The specific impedance of the antenna D. Losses in the antenna elements and feed line

Last Answer : B. An equivalent resistance that would dissipate the same amount of power as that radiated from an antenna

To radiate power efficiently, a long-wire antenna must have what minimum overall length?

Description : To radiate power efficiently, a long-wire antenna must have what minimum overall length?

Last Answer : One-half wavelength.

ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Description : ECE Board Exam March 1996 An antenna which is not resonant at a particular frequencies and so can be used over a wide band of frequencies and so can be used over a wide band of frequencies is called A. aperiodic B. boresight C. cassegrain D. top-loaded

Last Answer : A. aperiodic

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

An ungrounded antenna near the ground A. acts as a single antenna of twice the height B. is unlikely to need an earth mat C. acts as antenna array D. must be horizontally polarized

Description : An ungrounded antenna near the ground A. acts as a single antenna of twice the height B. is unlikely to need an earth mat C. acts as antenna array D. must be horizontally polarized

Last Answer : C. acts as antenna array

Choose the most appropriate statement (A) An antenna can radiate only HF signals

Description : Choose the most appropriate statement (A) An antenna can radiate only HF signals (B) An antenna can radiate and receive HF signals (C) An antenna can receive only HF signals (D) An antenna can receive and transmit simultaneously HF signals

Last Answer : Choose the most appropriate statement (A) An antenna can radiate only HF signals (B) An antenna can radiate and receive HF signals (C) An antenna can receive only HF signals (D) An antenna can receive and transmit simultaneously HF signals

The advantage of using top loading in a shortened HF vertical antenna is A. lower quality factor B. greater structural strength C. higher losses D. improved radiation efficiency

Description : The advantage of using top loading in a shortened HF vertical antenna is A. lower quality factor B. greater structural strength C. higher losses D. improved radiation efficiency

Last Answer : D. improved radiation efficiency

Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves

Description : Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves

Last Answer : D. Hertzian waves

The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Description : The fields surrounding the antenna do not collapse their energy back into the antenna but rather radiate it out in space

Last Answer : radiation field

It is useful to refer to an isotropic radiator. A. when comparing the gains of directional antennas B. when testing a transmission line for standing wave ratio C. when (in the northern hemisphere) directing the transmission D. when using a dummy load to tune a transmitter

Description : It is useful to refer to an isotropic radiator. A. when comparing the gains of directional antennas B. when testing a transmission line for standing wave ratio C. when (in the northern hemisphere) directing the transmission D. when using a dummy load to tune a transmitter

Last Answer : A. when comparing the gains of directional antennas

When is it useful to refer to an isotropic radiator? A. When comparing the gains of directional antennas B. When testing a transmission line for standing wave ratio C. When (in the northern hemisphere) directing the transmission in a southerly direction D. When using a dummy load to tune a transmitter

Description : When is it useful to refer to an isotropic radiator? A. When comparing the gains of directional antennas B. When testing a transmission line for standing wave ratio C. When (in the northern ... ) directing the transmission in a southerly direction D. When using a dummy load to tune a transmitter

Last Answer : A. When comparing the gains of directional antennas

A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Description : A modulation which does not follow the sine wave pattern, it produces undesirable harmonics such as spurious emission A. 0% modulated B. Over-modulated C. Unmodulated D. 100% modulated

Last Answer : B. Over-modulated

The frequency of operation of a dipole antenna cut to a length of 3.4 m. A. 88 MHz B. 44 MHz C. 22 MHz D. 11 MHz

Description : The frequency of operation of a dipole antenna cut to a length of 3.4 m. A. 88 MHz B. 44 MHz C. 22 MHz D. 11 MHz

Last Answer : B. 44 MHz

The frequency of operation of a dipole antenna cut to length of 3.4 m. A. 42.9 MHz B. 61.3 MHz C. 38.5 MHz D. 53.5 MHz

Description : The frequency of operation of a dipole antenna cut to length of 3.4 m. A. 42.9 MHz B. 61.3 MHz C. 38.5 MHz D. 53.5 MHz

Last Answer : A. 42.9 MHz

One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Description : One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Last Answer : d. To prevent reradiation of the local oscillator

How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Description : How is it possible to lower the resonant frequency of Hertz dipole antenna? A. By reducing the frequency at the transmitter B. By connecting a capacitor in series with the antenna C. By the connecting a resistor in series with the antenna D. By connecting an inductor in series with the antenna

Last Answer : D. By connecting an inductor in series with the antenna

_________ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Horn antenna B. LNA C. Satellite receiver D. Satellite dish

Description : _________ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Horn antenna B. LNA C. Satellite receiver D. Satellite dish

Last Answer : B. LNA

In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Description : In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Last Answer : B. distance-to-reuse ratio (D/R)

Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Description : A one-quarter wavelength shunt-fed vertical Marconi antenna A. has maximum radiation in a vertical direction B. must have a horizontal receiving antenna for the best reception C. must use a receiving antenna for the best reception D. must have a vertical receiving antenna for the best reception

Last Answer : D. must have a vertical receiving antenna for the best reception

What is the minimum number of turns a helix antenna must have? A. 3 B. 5 C. 4 D. 6

Description : What is the minimum number of turns a helix antenna must have? A. 3 B. 5 C. 4 D. 6

Last Answer : A. 3

In testing transmitter to prevent interfering with other stations, which type of antenna must be used? A. Void antenna B. Dummy antenna C. Hertzian antenna D. Isotropic antenna

Description : In testing transmitter to prevent interfering with other stations, which type of antenna must be used? A. Void antenna B. Dummy antenna C. Hertzian antenna D. Isotropic antenna

Last Answer : B. Dummy antenna

If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Description : If the current ratios of the two or more elements must be held 5% and the phase angle to 3° the antenna is called a A. end fire array B. critical phased array C. broadband array D. wideband array

Last Answer : B. critical phased array

When testing transmitter to prevent interfering with other stations, which type of antenna must be used? A. Dummy antenna B. Hertzian antenna C. None of these D. Void antenna

Description : When testing transmitter to prevent interfering with other stations, which type of antenna must be used? A. Dummy antenna B. Hertzian antenna C. None of these D. Void antenna

Last Answer : A. Dummy antenna

The minimum number of turns a helix antenna must have. A. 4 B. 5 C. 3 D. 6

Description : The minimum number of turns a helix antenna must have. A. 4 B. 5 C. 3 D. 6

Last Answer : C. 3

A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Description : A component that samples the microwave signal travelling in one direction down to the transmission line A. Isolator B. Combiner C. Directional coupler D. Attenuator

Last Answer : C. Directional coupler

How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas

Description : How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas

Last Answer : C. Employment of highly directional spot-beam antennas

Best choice of transmission line component to couple a coaxial line to a parallel-wire line A. Shorting B. Balun C. Slotted line D. Directional coupler

Description : Best choice of transmission line component to couple a coaxial line to a parallel-wire line A. Shorting B. Balun C. Slotted line D. Directional coupler

Last Answer : B. Balun

To couple a coaxial line to parallel line, it is better to use a ______. A. Slotted line B. Quarter-wave transformer C. Directional Coupler D. Balun

Description : To couple a coaxial line to parallel line, it is better to use a ______. A. Slotted line B. Quarter-wave transformer C. Directional Coupler D. Balun

Last Answer : D. Balun

To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line

Description : To connect coaxial line to a parallel-wire _________ is the best to use. A. directional coupler B. quarter-wave transformer C. balun D. slotted line

Last Answer : C. balun

The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Description : The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Last Answer : B. Closer coupling between the oscillator and the antenna.

What do you call the single booster installed on the antenna dish of satellite receiver? A. Low noise amplifier B. Single amplifier C. Noise amplifier D. Rectifier

Description : What do you call the single booster installed on the antenna dish of satellite receiver? A. Low noise amplifier B. Single amplifier C. Noise amplifier D. Rectifier

Last Answer : A. Low noise amplifier

A single conductor running from the transmitter to the antenna. A. RG-8/U B. Single line wire C. Twin-lead D. MIcrostrip

Description : A single conductor running from the transmitter to the antenna. A. RG-8/U B. Single line wire C. Twin-lead D. MIcrostrip

Last Answer : B. Single line wire

Wave trap is used to trap waves of (a) power frequencies (b) higher frequencies entering generator or transformer units (c) either of the above (d) none of the above

Description : Wave trap is used to trap waves of (a) power frequencies (b) higher frequencies entering generator or transformer units (c) either of the above (d) none of the above

Last Answer : (b) higher frequencies entering generator or transformer units

Aship-to-ship communicationssystemisplagued byfading.The bestsolutionseemstobe useof a. a more directional antenna b. a broadband antenna c. frequency diversity d. space diversity

Description : Aship-to-ship communicationssystemisplagued byfading.The bestsolutionseemstobe useof a. a more directional antenna b. a broadband antenna c. frequency diversity d. space diversity

Last Answer : c. frequency diversity

Indicate which of the following reasons for using metal counterpoise with antennas is false. A. Impossibly of a good ground connection B. Protection of personnel working underneath C. Provision of an earth for the antenna D. Rockiness of the ground itself

Description : Indicate which of the following reasons for using metal counterpoise with antennas is false. A. Impossibly of a good ground connection B. Protection of personnel working underneath C. Provision of an earth for the antenna D. Rockiness of the ground itself

Last Answer : B. Protection of personnel working underneath

An antenna “efficiency” is computed by using one of the following equations. A. Efficiency = (radiation resistance / transmission resistance) B. Efficiency = (total resistance / radiation resistance) x 100% C. Efficiency = (effective radiated power / transmitter output) x 100% D. Efficiency = (radiation resistance / total resistance) x 100%

Description : An antenna efficiency is computed by using one of the following equations. A. Efficiency = (radiation resistance / transmission resistance) B. Efficiency = (total resistance / radiation resistance) x ... / transmitter output) x 100% D. Efficiency = (radiation resistance / total resistance) x 100%

Last Answer : D. Efficiency = (radiation resistance / total resistance) x 100%