What is the primary reason for the development of the turnstile antenna?

What is the primary reason for the development of the  turnstile antenna?
by

1 Answer

Answer :

For omnidirectional vhf communications.
by

Related questions

______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Description : ______ is an antenna array which is highly directional at right angles to the plane of the array? A. Broadside array B. End-fire array C. Turnstile array D. Log-periodic array

Last Answer : A. Broadside array

The power fed to a two-bay turnstile antenna is 100 watts. If the antenna has a 2 dB power gain, what is the effective radiated power? A. 317 watts B. 158 watts C. 200 watts D. 400 watts

Description : The power fed to a two-bay turnstile antenna is 100 watts. If the antenna has a 2 dB power gain, what is the effective radiated power? A. 317 watts B. 158 watts C. 200 watts D. 400 watts

Last Answer : B. 158 watts

What composite field (composed of E and H fields) is found stored in the antenna?

Description : What composite field (composed of E and H fields) is found stored in the antenna?

Last Answer : Induction field.

Which two composite fields (composed of E and H fields) are associated with every antenna?

Description : Which two composite fields (composed of E and H fields) are associated with every antenna?

Last Answer : Induction field and radiation field.

If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Description : If a transmitting antenna is placed close to the ground, how should the antenna be polarized to give the greatest signal strength?

Last Answer : Vertically polarized.

The power gain of an antenna is directly related to what other antenna property?

Description : The power gain of an antenna is directly related to what other antenna property?

Last Answer : Directivity.

What radar component permits the use of a single antenna for both transmitting and receiving?

Description : What radar component permits the use of a single antenna for both transmitting and receiving?

Last Answer : Duplexer.

What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Description : What is the result of an impedance mismatch between a receiver or transmitter and its transmission line or antenna?

Last Answer : High vswr, which equates to poor reception or a loss of power output.

All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Description : All the power sent down a transmission line from a transmitter can be transferred to an antenna under what optimum conditions?

Last Answer : When the characteristic impedance of the transmission line and the load impedance are equal.

What type of transmission line is often used to connect a television set to its antenna?

Description : What type of transmission line is often used to connect a television set to its antenna?

Last Answer : Twin lead.

What term is used for the end of the transmission line that is connected to an antenna?

Description : What term is used for the end of the transmission line that is connected to an antenna?

Last Answer : Output end, receiving end, load end and sink.

What connecting link is used to transfer energy from a radio transmitter to its antenna located on

Description : What connecting link is used to transfer energy from a radio transmitter to its antenna located on

Last Answer : Transmission line.

What determines the beam elevation angle of an antenna that is electronically scanned in elevation?

Description : What determines the beam elevation angle of an antenna that is electronically scanned in elevation?

Last Answer : Frequency or phase of radiated energy.

What type of antenna has all elements connected to the same energy source?

Description : What type of antenna has all elements connected to the same energy source?

Last Answer : Driven Array.

What is a set of antenna elements called?

Description : What is a set of antenna elements called?

Last Answer : Antenna Array.

A horizontally truncated paraboloid antenna is used for what purpose?

Description : A horizontally truncated paraboloid antenna is used for what purpose?

Last Answer : Determine elevation.

What characteristic allows the same antenna to both transmit and receive?

Description : What characteristic allows the same antenna to both transmit and receive?

Last Answer : Reciprocity.

What is the term that is used to describe narrowness in the radiated beam of an antenna?

Description : What is the term that is used to describe narrowness in the radiated beam of an antenna?

Last Answer : Antenna directivity.

What type of antenna radiates in and receives energy from all directions at once?

Description : What type of antenna radiates in and receives energy from all directions at once?

Last Answer : Omnidirectional.

What term is used to express the efficiency of an antenna?

Description : What term is used to express the efficiency of an antenna?

Last Answer : Power gain or power ratio

What precautions must be taken when sweeping a transmitting antenna?

Description : What precautions must be taken when sweeping a transmitting antenna?

Last Answer : You must ensure that power induced from any adjacent transmitting antennas does not damage your test equipment.

What is the purpose of an antenna coupler

Description : What is the purpose of an antenna coupler

Last Answer : It matches the impedance of an antenna to that of a transmission line at any desired frequency.

What is the function of an antenna patch panel?

Description : What is the function of an antenna patch panel?

Last Answer : To connect an antenna/transmission line to a receiver/transmitter.

What is the radiation pattern of a quarter-wave antenna?

Description : What is the radiation pattern of a quarter-wave antenna?

Last Answer : A circular radiation pattern in the horizontal plane, or same as a half wave.

What is the simplest method of feeding power to the half wave antenna?

Description : What is the simplest method of feeding power to the half wave antenna?

Last Answer : To connect one end through a capacitor to the final output stage of the transmitter.

In which plane will the half-wave antenna be operating if it is mounted horizontally?

Description : In which plane will the half-wave antenna be operating if it is mounted horizontally?

Last Answer : Vertical plane.

. If a basic half-wave antenna is mounted vertically, what type of radiation pattern will be produced?

Description : . If a basic half-wave antenna is mounted vertically, what type of radiation pattern will be produced?

Last Answer : Nondirectional.

The Yagi antenna is an example of what type of array?

Description : The Yagi antenna is an example of what type of array?

Last Answer : Multielement parasitic array.

What is the main disadvantage of the rhombic antenna?

Description : What is the main disadvantage of the rhombic antenna?

Last Answer : It requires a large antenna site.

What is the polarity of the currents that feed the V antenna?

Description : What is the polarity of the currents that feed the V antenna?

Last Answer : Opposite.

What is another name for the Beverage antenna?

Description : What is another name for the Beverage antenna?

Last Answer : Wave antenna.

To radiate power efficiently, a long-wire antenna must have what minimum overall length?

Description : To radiate power efficiently, a long-wire antenna must have what minimum overall length?

Last Answer : One-half wavelength.

The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Description : The parasitic array can be rotated to receive or transmit in different directions. What is the name given to such an antenna?

Last Answer : Rotary array.

What is the purpose of antenna stubs?

Description : What is the purpose of antenna stubs?

Last Answer : To produce desired phase relationship between connected elements.

What is the radiation resistance of a half-wave antenna in free space?

Description : What is the radiation resistance of a half-wave antenna in free space?

Last Answer : 73 ohms.

What type of polarization should be used if an antenna is mounted on a moving vehicle at frequencies below 50 megahertz?

Description : What type of polarization should be used if an antenna is mounted on a moving vehicle at frequencies below 50 megahertz?

Last Answer : Vertical polarization.

The various properties of a transmitting antenna can apply equally to the same antenna when it is used as a receiving antenna. What term is used for this property?

Description : The various properties of a transmitting antenna can apply equally to the same antenna when it is used as a receiving antenna. What term is used for this property?

Last Answer : Reciprocity of antennas.

What is the term used to identify the points of minimum current and minimum voltage on an antenna?

Description : What is the term used to identify the points of minimum current and minimum voltage on an antenna?

Last Answer : Current and voltage nodes.

What is the term used to identify the points of high current and high voltage on an antenna?

Description : What is the term used to identify the points of high current and high voltage on an antenna?

Last Answer : Current and voltage loops.

What three factors determine the type, size, and shape of an antenna?

Description : What three factors determine the type, size, and shape of an antenna?

Last Answer : Frequency of operation of the transmitter, amount of power to be radiated, and general direction of the receiving set.

What are the three parts of a complete antenna system?

Description : What are the three parts of a complete antenna system?

Last Answer : Coupling device, feeder, and antenna.

What type of amplifier would be used to amplify the signal from a radio antenna?

Description : What type of amplifier would be used to amplify the signal from a radio antenna?

Last Answer : An rf voltage amplifier.

Reason for the iPod Touch's "rounded rectangle" antenna?

Description : Reason for the iPod Touch's "rounded rectangle" antenna?

Last Answer : answer:the reason for the plastic is because the metal gives bad reception against the antennas, that's why you see a lot of unhappy macbook pro people because their antennas are behind the aluminum casing and ... . as for the 2nd gen ipod touch, that isn't bluetooth, that is the nike + adapter

One of the following is not a reason for the use of an earth mat A. impossibility of a good ground connection B. provision of an earth for the antenna C. protection of personnel working underneath D. improvement of the radiation pattern of the antenna

Description : One of the following is not a reason for the use of an earth mat A. impossibility of a good ground connection B. provision of an earth for the antenna C. protection of personnel working underneath D. improvement of the radiation pattern of the antenna

Last Answer : C. protection of personnel working underneath

Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Description : Not a reason for the use of an antenna coupler. A. To make the antenna look resistive B. To provide the output amplifier with the correct load impedance C. To discriminate against harmonics D. To prevent re-radiation of the local oscillator

Last Answer : D. To prevent re-radiation of the local oscillator

One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Description : One ofthe followingis not a reason forthe use of anantenna coupler: a. To make the antenna look resistive b. To provide the output amplifier with the correct load impedance c. To discriminate against harmonics d. To prevent reradiation of the local oscillator

Last Answer : d. To prevent reradiation of the local oscillator

What are the primary disadvantages of the magic-T?

Description : What are the primary disadvantages of the magic-T?

Last Answer : Low power-handling capability and power losses

What two variables determine the primary frequency of a resonant cavity?

Description : What two variables determine the primary frequency of a resonant cavity?

Last Answer : Size and shape of the cavity.

What is the primary purpose of a directional coupler?

Description : What is the primary purpose of a directional coupler?

Last Answer : Sampling energy within a waveguide.

What is the primary purpose of a dummy load?

Description : What is the primary purpose of a dummy load?

Last Answer : Absorb all energy without producing standing waves.