What component supplies restoring force to the coil of the D’Arsonval meter movement?

What component supplies restoring force to the coil of the  D’Arsonval meter movement?
by

1 Answer

Answer :

Hairspring.
by

Related questions

What component of the D’Arsonval meter movement completes the circuit for current flow to the coil?

Description : What component of the D’Arsonval meter movement completes the circuit for current flow to the coil?

Last Answer : Hairspring.

What is the effect of current flow through the coil in a d’Arsonval meter movement?

Description : What is the effect of current flow through the coil in a d’Arsonval meter movement?

Last Answer : A magnetic field is generated around the coil and the attraction of this field with the permanent magnet causes the coil to move

What physical component of a galvanometer provides the restoring force for the coil?

Description : What physical component of a galvanometer provides the restoring force for the coil?

Last Answer : Phosphor bronze ribbons.

What physical component of a galvanometer provides the restoring force for the coil?

Description : What physical component of a galvanometer provides the restoring force for the coil?

Last Answer : Phosphor bronze ribbons.

How can a d’Arsonval meter movement be adapted for use as an ac meter?

Description : How can a d’Arsonval meter movement be adapted for use as an ac meter?

Last Answer : By the use of a rectifier

What are three functions of the hairsprings in a d’Arsonval meter movement?

Description : What are three functions of the hairsprings in a d’Arsonval meter movement?

Last Answer : To return the pointer to its rest position when there is no current flow; to oppose the coil movement when there is current flow; to provide electrical connections for the coil.

What type of meter movement is the d’Arsonval meter movement?

Description : What type of meter movement is the d’Arsonval meter movement?

Last Answer : A permanent-magnet moving-coil meter movement used in most electrical and electronic meters.

What modification is made to the D’Arsonval meter movement to enable the meter to measure voltage?

Description : What modification is made to the D’Arsonval meter movement to enable the meter to measure voltage?

Last Answer : A multimeter (high resistance) is placed in series with the coil of the meter.

What advantage is gained by using pole pieces with curved faces in the D’Arsonval meter movement?

Description : What advantage is gained by using pole pieces with curved faces in the D’Arsonval meter movement?

Last Answer : Two-position and three-position.

Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Description : Which of the following electric meter movements uses a stationary permanent magnet and movable coil? A. D'Arsonval B. Electrodynamometer C. Moving iron-vane D. Inclined coil iron-vane

Last Answer : Answer: A

What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Description : What is the primary advantage of the electrodynamometer type meter over the D’Arsonval-type meter?

Last Answer : The electrodynamometer-type meter can be used to measure both ac and dc currents.

A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Description : A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Last Answer : Answer: C

(True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Description : (True or False) The larger the current required to produce full-scale deflection of the meter coil, the better the sensitivity of the meter.

Last Answer : False.

When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Last Answer : Answer: C

The basic meter movement responds to the flow of current through its coil. Therefore, this meter movement may be used as a/an _____________. A. voltmeter by placing a resistance in parallel with the coil B. ohmmeter by placing another meter movement in parallel with the coil C. wattmeter by placing a battery in parallel with the coil D. ammeter by placing a low resistance in parallel with the coil

Description : The basic meter movement responds to the flow of current through its coil. Therefore, this meter movement may be used as a/an _____________. A. voltmeter by placing a resistance in parallel with the ... in parallel with the coil D. ammeter by placing a low resistance in parallel with the coil

Last Answer : Answer: D

What is the only use for the voltage sensitive meter movement?

Description : What is the only use for the voltage sensitive meter movement?

Last Answer : High-voltage measurement.

What type of meter movement reacts to voltage rather than current?

Description : What type of meter movement reacts to voltage rather than current?

Last Answer : Electrostatic.

How is it possible to use a current sensitive meter movement to measure voltage?

Description : How is it possible to use a current sensitive meter movement to measure voltage?

Last Answer : Since the resistance of a meter movement remains the same as the pointer is deflected, the amount of current through the movement is proportional to the voltage applied. Therefore, only the scale of the movement must be changed.

What value does a meter movement react to (actually measure) when measuring ac?

Description : What value does a meter movement react to (actually measure) when measuring ac?

Last Answer : Average value.

What are two methods used to damp a meter movement?

Description : What are two methods used to damp a meter movement?

Last Answer : As the coil moves through the field of the permanent magnet, a current is induced in the coil opposing the movement of the coil; and a vane can be attached to the coil and placed in the airtight chamber so that the movement of the vane opposes the movement of the coil.

What is the limiting factor as to the amount of current an electrodynamometer meter movement can handle?

Description : What is the limiting factor as to the amount of current an electrodynamometer meter movement can handle?

Last Answer : Size of spiral conducting.

What components in an electrodynamometer-type meter movement produce the magnetic field?

Description : What components in an electrodynamometer-type meter movement produce the magnetic field?

Last Answer : Fixed coils.

What is the limiting factor as to the amount of current an electrodynamometer meter movement can handle?

Description : What is the limiting factor as to the amount of current an electrodynamometer meter movement can handle?

Last Answer : Size of spiral conducting.

What components in an electrodynamometer-type meter movement produce the magnetic field?

Description : What components in an electrodynamometer-type meter movement produce the magnetic field?

Last Answer : Fixed coils.

What structurally large, low-resistance conductor is connected in parallel with the meter movement to prevent damage?

Description : What structurally large, low-resistance conductor is connected in parallel with the meter movement to prevent damage?

Last Answer : Shunt.

At what point on a meter movement are the most accurate readings taken?

Description : At what point on a meter movement are the most accurate readings taken?

Last Answer : Midscale.

An Aryton shunt is used to make a D'Arsonval galvanometer into a

Last Answer : An Aryton shunt is used to make a D'Arsonval galvanometer into a multi range ammeter.

What are two types of checks used in troubleshooting power supplies?

Description : What are two types of checks used in troubleshooting power supplies?

Last Answer : Visual and signal tracing.

What radar subsystem supplies timing signals to coordinate the operation of the complete system?

Description : What radar subsystem supplies timing signals to coordinate the operation of the complete system?

Last Answer : Synchronizer.

What are two types of checks used in troubleshooting power supplies?

Description : What are two types of checks used in troubleshooting power supplies?

Last Answer : Visual and signal tracing.

A device which supplies a voltage is commonly referred to by what name?

Description : A device which supplies a voltage is commonly referred to by what name?

Last Answer : A voltage source.

If the source voltage for the voltage divider in question 50 supplies 150 volts, what is the total current through the voltage divider?

Description : If the source voltage for the voltage divider in question 50 supplies 150 volts, what is the total current through the voltage divider?

Last Answer : 495 mA.

Which of the following statements regarding whole blood transfusion is/are correct? A. Whole blood is the most commonly used red cell preparation for transfusion in the United States. B. Whole blood is effective in the replacement of acute blood loss. C. Most blood banks in the United States have large supplies of whole blood available. D. The use of whole blood produces higher rates of disease transmission than the use of individual component therapies.

Description : Which of the following statements regarding whole blood transfusion is/are correct? A. Whole blood is the most commonly used red cell preparation for transfusion in the United States. B. ... whole blood produces higher rates of disease transmission than the use of individual component therapies.

Last Answer : Answer: B DISCUSSION: Whole blood is effective as a replacement fluid for acute blood loss because it provides both volume and oxygen-carrying capacity (red blood cells). It is rarely used in the ... the use of packed red blood cells, fresh frozen plasma, and platelets, each from a different donor

Anna Wren, sales manager for Nordic Lumber, tells the firm's inventory manager that failure to have adequate supplies of pressure -treated lumber on hand has cost the firm £175,000 in lost sales. This figure would be used as a component management figures? A)Carrying costs B)Replenishment costs C)Stockout costs D)Safety stock costs E)Reorder costs

Description : Anna Wren, sales manager for Nordic Lumber, tells the firm's inventory manager that failure to have adequate supplies of pressure -treated lumber on hand has cost the firm £175,000 in lost ... figures? A)Carrying costs B)Replenishment costs C)Stockout costs D)Safety stock costs E)Reorder costs

Last Answer : C)Stockout costs

A publishing company purchases a computer to aid in stock control. This computer is an example of which type of industrial product? A)Raw material B)Major supplies C)Accessory equipment D)Component part

Description : A publishing company purchases a computer to aid in stock control. This computer is an example of which type of industrial product? A)Raw material B)Major supplies C)Accessory equipment D)Component part

Last Answer : C)Accessory equipment

Products that are used directly in the production of a final product but are not easily identifiable are categorised as A)accessory products. B)component parts. C)consumable supplies. D)assembly components. E)process materials

Description : Products that are used directly in the production of a final product but are not easily identifiable are categorised as A)accessory products. B)component parts. C)consumable supplies. D)assembly components. E)process materials

Last Answer : E)process materials

Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Description : Large tools and machines used in a production process for a considerable length of time are classified as A)major equipment. B)accessory equipment. C)component parts. D)raw materials. E)consumable supplies.

Last Answer : A)major equipment

Why the the reading on the newton meter increases when a current passes through the coil?

Description : Why the the reading on the newton meter increases when a current passes through the coil?

Last Answer : dadsd

Which of the instruments listed could be use to locate a grounded field coil in a synchronous motor? A. Ammeter B. Voltmeter C. Megohmmeter D. Frequency meter

Description : Which of the instruments listed could be use to locate a grounded field coil in a synchronous motor? A. Ammeter B. Voltmeter C. Megohmmeter D. Frequency meter

Last Answer : Answer: C

A testing device called a 'growler' is being used to locate a shorted coil in the stator of an AC electrical machine. When the 'feeler' is moved over a slot containing the shorted coil _____________. A. a loud growling noise will be heard B. any vibration within the feeler will cease C. the meter needle will be deflected to zero D. the meter needle will be deflected to full-scale

Description : A testing device called a 'growler' is being used to locate a shorted coil in the stator of an AC electrical machine. When the 'feeler' is moved over a slot containing the shorted coil _____________. ... . the meter needle will be deflected to zero D. the meter needle will be deflected to full-scale

Last Answer : Answer: A

Which of the listed instruments can be best used to locate a grounded field coil in a synchronous motor? A. Frequency meter B. Megohmmeter C. Voltmeter D. Multimeter

Description : Which of the listed instruments can be best used to locate a grounded field coil in a synchronous motor? A. Frequency meter B. Megohmmeter C. Voltmeter D. Multimeter

Last Answer : Answer: B

A device which converts chemical energy into electrical energy is called -----? A. motor B. generator C. moving-coil meter D. battery (Answer)

Description : A device which converts chemical energy into electrical energy is called -----? A. motor B. generator C. moving-coil meter D. battery (Answer)

Last Answer : D. battery (Answer)

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up

Description : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is (A) 9997 Ω (B) 10000 Ω (C) 997 Ω (D) 10003 Ω

Last Answer : A moving coil meter has a resistance of 3 Ω and gives full scale deflection with 30 mA. To measure voltage up to 300 V, the external resistance to be connected in series with the instrument is 9997 Ω

The current coil of a single-phase energy meter is wound on

Description : The current coil of a single-phase energy meter is wound on (a) One limb of the laminated core (b) Both the limbs of the laminated core with same number of turns (c) Both the limbs of the laminated core with different number of turns (d) The centre of the limb on the laminated core

Last Answer : The current coil of a single-phase energy meter is wound on Both the limbs of the laminated core with same number of turns

The series magnet of a single phase Energy meter consists of coil of _____.

Last Answer : The series magnet of a single phase Energy meter consists of coil of thick wire of few turns.

The coil of a moving coil meter is would on

Last Answer : The coil of a moving coil meter is would on An aluminium frame.

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.