How the ammeter’s effect on the circuit being measured is kept to a minimum?

How the ammeter’s effect on the circuit being measured is  kept to a minimum?
by

1 Answer

Answer :

The resistance of the ammeter must be much smaller than the  circuit load.
by

Related questions

Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Description : Ammeters and voltmeters used in sinusoidal AC power systems indicate which of the following values of the waveforms measured? A. Peak value B. Root-mean-square value C. Average value D. Maximum value

Last Answer : Answer: B

List the six safety precautions for the use of ammeters

Description : List the six safety precautions for the use of ammeters

Last Answer : a. Always connect a voltmeter in parallel. b. Always start with the highest range. c. Deenergize and discharge the circuit before connecting or disconnecting the voltmeter. d. ... to measure ac voltage. f. Observe the general safety precautions of electric and electronic devices.

What are the advantages of connecting ammeters in parallel when performing current measurements?

Description : What are the advantages of connecting ammeters in parallel when performing current measurements?

Last Answer : Decreased internal meter resistance, greater accuracy, and greater current range.

How is the loading effect of a voltmeter kept to a minimum?

Description : How is the loading effect of a voltmeter kept to a minimum?

Last Answer : A voltmeter must have a high resistance compared to the circuit being measured.

Why ammeters have to be arranged in class and voltmeters in parallel circuit ?

Description : Why ammeters have to be arranged in class and voltmeters in parallel circuit ?

Last Answer : Ammeter must be added to the class because it measures the flow. When added in parallel, the flow will be divided into two parts. As a result, the exact value of the flow cannot be ... because adding voltage will change the voltage difference. But in parallel the voltage difference does not change.

X, Y and Z are ammeters and Y reads 0.5 A. (i) What are the readings in ammeters X and Z ? (ii) What is the total resistance of the circuit ?

Description : X, Y and Z are ammeters and Y reads 0.5 A. (i) What are the readings in ammeters X and Z ? (ii) What is the total resistance of the circuit ?

Last Answer : X, Y and Z are ammeters and Y reads 0.5 A. (i) What are the readings in ammeters X and Z ? (ii) What is the total resistance of the circuit ?

A centre zero ammeters connected in the rotor circuit of a 6-pole 50 Hz induction motor makes 30...

Description : A centre zero ammeters connected in the rotor circuit of a 6-pole 50 Hz induction motor makes 30 oscillations in one minute. The rotor speed is

Last Answer : A centre zero ammeters connected in the rotor circuit of a 6-pole 50 Hz induction motor makes 30 oscillations in one minute. The rotor speed is 990.

How is a series-type ohmmeter connected to the circuit being measured?

Description : How is a series-type ohmmeter connected to the circuit being measured?

Last Answer : The ohmmeter is connected in series with the resistance to be measured.

How does an ammeter affect the circuit being measured?

Description : How does an ammeter affect the circuit being measured?

Last Answer : Since the ammeter is a resistor in series with the load, it increases the resistance of the circuit and lowers circuit current.

How is a voltmeter connected to the circuit to be measured?

Description : How is a voltmeter connected to the circuit to be measured?

Last Answer : In parallel.

Why will an ammeter be damaged if connected in parallel with the circuit to be measured?

Description : Why will an ammeter be damaged if connected in parallel with the circuit to be measured?

Last Answer : Since the ammeter has a small resistance compared to the load, it will have very high current if it is connected in parallel. This high current will damage the meter.

In what manner are voltage-measuring instruments connected to the circuit to be measured?

Description : In what manner are voltage-measuring instruments connected to the circuit to be measured?

Last Answer : In parallel.

What are Vault Meters and Ammeters ?

Description : What are Vault Meters and Ammeters ?

Last Answer : : Ammeter is used to measure current flow and Vault meter is used to measure voltage. These two measuring instruments are usually in one place and the two are often called multimeters. A multimeter ... DC voltage and current. Today's multimeters can measure many things, not just voltage and current.

How many types of ammeters ?

Description : How many types of ammeters ?

Last Answer : There are two types of ammeters. Namely digital ammeter , analog ammeter.

External shunts are sometimes used with ammeters to _______. A. increase meter sensitivity B. permit shunts with larger resistances to be utilized C. prevent damage to the meter movement from heat generated by the shunt D. enable the construction of a compact meter with a virtually unlimited range

Description : External shunts are sometimes used with ammeters to _______. A. increase meter sensitivity B. permit shunts with larger resistances to be utilized C. prevent damage to the meter movement from heat generated by the shunt D. enable the construction of a compact meter with a virtually unlimited range

Last Answer : Answer: C

do ammeters have resistance?

Last Answer : Yes ammeter has its own resistance Not only ammeter every electrical devices has there own resistance practicaly

Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Description : Line losses in a distribution circuit are kept to a minimum by __________. A. adding rubber insulation conductors to the circuit B. using higher current and lower voltage C. increasing the number of thermal relays in the circuit D. using higher voltage and lower current

Last Answer : Answer: D

Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic fluxes would cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Description : Tightly knit metal braid wire can be used with a printed circuit board when ___________. A. conductor flexibility is required B. desoldering components in the circuit C. electrically produced magnetic ... cause inaccuracies in adjacent components D. reactance in the circuit must be kept to a minimum

Last Answer : Answer: B

What happens when a frequency meter is adjusted to the frequency of the signal being measured?

Description : What happens when a frequency meter is adjusted to the frequency of the signal being measured?

Last Answer : Power is absorbed by the frequency meter cavity; and a pronounced dip in power, at the output, will be observed.

In swept-frequency testing the impedance of a transmission line, what electrical characteristic is actually being measured?

Description : In swept-frequency testing the impedance of a transmission line, what electrical characteristic is actually being measured?

Last Answer : Swr on the transmission line.

If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation?

Description : If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation?

Last Answer : Yes.

What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?

Description : What type of meter is shown and what is the value of the quantity being measured for each meter in figure 1-51?

Last Answer : (A) Megger (megohmmeter), infinity; (B) Wattmeter, 9.5 kilowatts (9,500 watts). (C) Watt-hour meter, 2.693 megawatt-hours 2,693 kilowatt-hours) (2,693,000 watt-hours).

What type of meter is shown and what is the value of the quantity being measured for each meter in figure1-49?

Description : What type of meter is shown and what is the value of the quantity being measured for each meter in figure1-49?

Last Answer : a. A dc ammeter, 90 mA dc b. A dc voltmeter, 200 V dc c. An ac voltmeter, 4.6 V ac d. An ohmmeter, 400 ohms

The power of a n-phase circuit can be measured by using a minimum of

Last Answer : The power of a n-phase circuit can be measured by using a minimum of (n - 1) wattmeter elements

When is line current minimum in a parallel-LC circuit?

Description : When is line current minimum in a parallel-LC circuit?

Last Answer : At the resonant frequency.

If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Description : If the output impedance of an amplifier circuit is decreased, what is the effect on the gain?

Last Answer : The gain decreases.

What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases

What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero

What effect does the internal resistance have on the rest of the circuit shown in figure 3-60?

Description : What effect does the internal resistance have on the rest of the circuit shown in figure 3-60?

Last Answer : Because of the 2-volt drop across the internal resistance, only 48 volts is available for the rest of the circuit.

Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Description : Should the capacitance of the photodetector be kept small or large to prevent the RC time constant from limiting the response time?

Last Answer : Small

Which one of the following is the name of a device used to measure voltage without drawing ANY current from the circuit being measured? Is it: w) a wattmeter x) a galvanometer y) an ammeter z) a potentiometer

Description : Which one of the following is the name of a device used to measure voltage without drawing ANY current from the circuit being measured? Is it: w) a wattmeter x) a galvanometer y) an ammeter z) a potentiometer

Last Answer : ANSWER: Z -- A POTENTIOMETER

What type of switch is used if it is necessary to guard against a circuit being accidentally turned

Description : What type of switch is used if it is necessary to guard against a circuit being accidentally turned

Last Answer : A locked-position switch.

When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage is being measured B. input impedance much less than the impedance across which the voltage is being measured C. sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Description : When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage ... sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Last Answer : Answer: A

The piezoelectric effect is an example of a voltage being produced by what method?

Description : The piezoelectric effect is an example of a voltage being produced by what method?

Last Answer : Pressure.

If a voltage (positive or negative) is measured on the "1" output of a flip-flop, what state is it in?

Description : If a voltage (positive or negative) is measured on the "1" output of a flip-flop, what state is it in?

Last Answer : SET state.

What type of radar transmitter power is measured over a period of time?

Description : What type of radar transmitter power is measured over a period of time?

Last Answer : Average power.

The distance from a radar set to a target measured along the line of sight is identified by what term?

Description : The distance from a radar set to a target measured along the line of sight is identified by what term?

Last Answer : Range.

Radar surface-angular measurements are referenced to true north and measured in what plane?

Description : Radar surface-angular measurements are referenced to true north and measured in what plane?

Last Answer : Horizontal plane.

In first generation computers, internal processing functions were measured by what division of time?

Description : In first generation computers, internal processing functions were measured by what division of time?

Last Answer : Thousandths of a second (millisecond).

Technological advancement is measured by what, in the electronic computer world?

Description : Technological advancement is measured by what, in the electronic computer world?

Last Answer : Generations.

A point defect exhibiting an apparent gain in one direction will exhibit what, when measured in the opposite direction?

Description : A point defect exhibiting an apparent gain in one direction will exhibit what, when measured in the opposite direction?

Last Answer : An exaggerated loss.

What electrical quantity is measured by a watt-hour meter?

Description : What electrical quantity is measured by a watt-hour meter?

Last Answer : Energy.

What electrical quantity is measured by a wattmeter?

Description : What electrical quantity is measured by a wattmeter?

Last Answer : Power

What electrical quantity is measured by an ohmmeter?

Description : What electrical quantity is measured by an ohmmeter?

Last Answer : Resistance.

What electrical quantity is measured by a voltmeter?

Description : What electrical quantity is measured by a voltmeter?

Last Answer : Voltage.

A hydrogen atom moving at speed `v` collides with another hydrogen atom kept at rest .Find the minimum value of `v` for which one of the atoms may get

Description : A hydrogen atom moving at speed `v` collides with another hydrogen atom kept at rest .Find the minimum value of `v` for which one of the atoms may get

Last Answer : A hydrogen atom moving at speed `v` collides with another hydrogen atom kept at rest .Find the minimum value ... hydrogen atom `= 1.67 xx 10^(-27)kg`

The clearance volume of the air compressor is kept minimum because A. It allows maximum compression to be achieved B. It greatly affects volumetric efficiency C. It results in minimum work D. It permits isothermal compression

Description : The clearance volume of the air compressor is kept minimum because A. It allows maximum compression to be achieved B. It greatly affects volumetric efficiency C. It results in minimum work D. It permits isothermal compression

Last Answer : ANSWER : B

The minimum diameter of a sewer is kept A. 10 cm B. 15 cm C. 20 cm D. 25 cm

Description : The minimum diameter of a sewer is kept A. 10 cm B. 15 cm C. 20 cm D. 25 cm

Last Answer : ANS: B

Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept 5 to 7.5 cm below the inlet invert level C. The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Last Answer : ANS: D

Why is it desirable to operate paralleled AC generators at the same power factor? A. Circulating currents are kept to a minimum. B. Field excitation losses are kept to a minimum. C. Generator rotors will have a lesser tendency to hunt. D. Because a power factor increase will decrease kilowatt output.

Description : Why is it desirable to operate paralleled AC generators at the same power factor? A. Circulating currents are kept to a minimum. B. Field excitation losses are kept to a minimum. C. Generator ... will have a lesser tendency to hunt. D. Because a power factor increase will decrease kilowatt output.

Last Answer : Answer: A