In a dc motor that must be able to rotate in both directions, how is the direction changed?

In a dc motor that must be able to rotate in both directions,  how is the direction changed?
by

1 Answer

Answer :

By reversing either field or armature connections
by

Related questions

Which of the following statements is correct concerning a pair of enantiomers? (a) They rotate the plane of polarized light by exactly the same amount and in opposite directions. (b) They rotate the plane of polarized light by differing amounts and in opposite directions. (c) They rotate the plane of polarized light by differing amounts and in the same direction. (d) They have different melting point

Description : Which of the following statements is correct concerning a pair of enantiomers? (a) They rotate the plane of polarized light by exactly the same amount and in opposite directions. (b) They rotate ... polarized light by differing amounts and in the same direction. (d) They have different melting point

Last Answer : They rotate the plane of polarized light by exactly the same amount and in opposite directions.

Armature reaction in a dc motor causes a shift of the neutral plane in which direction?

Description : Armature reaction in a dc motor causes a shift of the neutral plane in which direction?

Last Answer : Opposite the rotation.

What factors determine the direction of rotation in a dc motor?

Description : What factors determine the direction of rotation in a dc motor?

Last Answer : Direction of armature current, and direction of magnetic flux in field.

The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Description : The direction of rotation of a DC propulsion motor can be changed by reversing the _____________. A. brush holder position B. polarity of the field poles C. brush staggered order D. motor interpole connections

Last Answer : Answer: B

To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Description : To measure incident power, you must rotate the coupler detector of the wattmeter so that the arrow indicating power flow points toward which end of the transmission line?

Last Answer : Load.

All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Description : All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Last Answer : in a direction that cannot be predicted but must be determined experimentally

If a wave's electric lines of force rotate through 360 degrees with every cycle of rf energy, what is the polarization of this wave?

Description : If a wave's electric lines of force rotate through 360 degrees with every cycle of rf energy, what is the polarization of this wave?

Last Answer : Circular polarization.

Which of the listed conditions will occur if the polarity of the field poles and the direction of current to the brushes of a DC motor were both reversed? A. The motor would not start. B. The direction of rotation of the armature would be reversed. C. The direction of rotation of the armature would be unchanged. D. The field pole windings would become overheated.

Description : Which of the listed conditions will occur if the polarity of the field poles and the direction of current to the brushes of a DC motor were both reversed? A. The motor would not start. ... direction of rotation of the armature would be unchanged. D. The field pole windings would become overheated.

Last Answer : Answer: C

If you reverse both the field and the armature connections to a DC propulsion motor, _____________. A. the direction of motor rotation will change B. the brushes will become overheated C. a magnetic lock will occur in the motor D. the direction of motor rotation will remain the same

Description : If you reverse both the field and the armature connections to a DC propulsion motor, _____________. A. the direction of motor rotation will change B. the brushes will become overheated C. a magnetic lock will occur in the motor D. the direction of motor rotation will remain the same

Last Answer : Answer: D

Which of the following statements describes what will happen when both the polarity of the field poles, and the direction of current to the brushes of a DC motor are reversed? A. The motor will not start. B. The direction of rotation of the armature will be reversed. C. The direction of rotation of the armature will remain the same. D. The field pole windings will become overheated.

Description : Which of the following statements describes what will happen when both the polarity of the field poles, and the direction of current to the brushes of a DC motor are reversed? A. The motor will ... of rotation of the armature will remain the same. D. The field pole windings will become overheated.

Last Answer : Answer: C

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

What is the load on a dc motor?

Description : What is the load on a dc motor?

Last Answer : The device to be driven by the motor.

What causes counter emf in a dc motor

Description : What causes counter emf in a dc motor

Last Answer : Generator action.

What are the differences between the components of a dc generator and a dc motor?

Description : What are the differences between the components of a dc generator and a dc motor?

Last Answer : There are no differences.

What is the effect of motor reaction in a dc generator?

Description : What is the effect of motor reaction in a dc generator?

Last Answer : A force which causes opposition to applied turning force.

Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Description : Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Last Answer : Polarit

Why do clocks rotate in a "Clockwise" direction?

Description : Why do clocks rotate in a "Clockwise" direction?

Last Answer : Because that is the direction that the shadow on sun dials moved, at least on the northern hemisphere. That is my guess.

In which direction does the Earth rotate on its axis? -General Knowledge

Description : In which direction does the Earth rotate on its axis? -General Knowledge

Last Answer : answer:

In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left side of the bearing without metal to metal contact (C) The journal sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Description : In hydrodynamic bearing, when the shaft begins to rotate in clockwise direction, (A) The journal climbs to the right side of the bearing without metal to metal contact (B) The journal climbs to the left ... sinks down to the bottom of the bearing (D) The journal is at the center of the bearing

Last Answer : (A) The journal climbs to the right side of the bearing without metal to metal contact

In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the type of node vibration. A. Three node vibration B. Two node vibration C. Single node vibration D. None of the above

Description : In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the type of node vibration. A. Three node vibration B. Two node vibration C. Single node vibration D. None of the above

Last Answer : B. Two node vibration

Which of the following statements is/are true? A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B. Shaft vibrates with maximum frequency when rotors rotate in same direction C. Zero node behavior is observed in rotors rotating in opposite direction D. All of the above

Description : Which of the following statements is/are true? A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B. Shaft vibrates with maximum frequency when rotors ... C. Zero node behavior is observed in rotors rotating in opposite direction D. All of the above

Last Answer : A. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the type of node vibration. A. Three node vibration B. Two node vibration C. Single node vibration D. None of the above

Description : In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the type of node vibration. A. Three node vibration B. Two node vibration C. Single node vibration D. None of the above

Last Answer : B. Two node vibration

Which of the following statements is/are true? A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B) Shaft vibrates with maximum frequency when rotors rotate in same direction C) Zero node behavior is observed in rotors rotating in opposite direction D) All of the above

Description : Which of the following statements is/are true? A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction B) Shaft vibrates with maximum frequency when rotors ... C) Zero node behavior is observed in rotors rotating in opposite direction D) All of the above

Last Answer : A) Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the no of degree of freedom vibration.a. Three degree of freedom vibration b. Two degree of freedom vibration c. Single degree of freedom vibration d. None of the above

Description : In the diagram shown below, if rotor X and rotor Z rotate in same direction and rotor Y rotates in opposite direction, then specify the no of degree of freedom vibration.a. Three degree of freedom vibration b. Two degree of freedom vibration c. Single degree of freedom vibration d. None of the above

Last Answer : b. Two degree of freedom vibration

Which of the following statements is/are true? a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction b. Shaft vibrates with maximum frequency when rotors rotate in same direction c. Zero node behavior is observed in rotors rotating in opposite direction d. All of the above

Description : Which of the following statements is/are true? a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction b. Shaft vibrates with maximum frequency when rotors ... c. Zero node behavior is observed in rotors rotating in opposite direction d. All of the above

Last Answer : a. Torsional vibrations do not occur in a three rotor system, if rotors rotate in same direction

Which one of these is NOT true? w) All planets revolve in the same direction. x) All planets rotate in the same direction. y) The orbits of the planets are all ellipses. z) The orbits of the planets are nearly in the same plane.

Description : Which one of these is NOT true? w) All planets revolve in the same direction. x) All planets rotate in the same direction. y) The orbits of the planets are all ellipses. z) The orbits of the planets are nearly in the same plane. 

Last Answer : ANSWER: X -- ALL PLANETS ROTATE IN THE SAME DIRECTION.

How do dual-motor dual capstan drives maintain a constant tape tension while operating in either a forward or reverse direction?

Description : How do dual-motor dual capstan drives maintain a constant tape tension while operating in either a forward or reverse direction?

Last Answer : Each capstan is driven by its own motor. It maintains tape tension by slowing down one of the motors. When the tape motion is reversed, the opposite motor is slowed down.

The direction of propeller shaft rotation in a turbo-electric synchronous propulsion drive motor is changed by reversing the _____________. A. polarity of the propulsion motor B. polarity of the propulsion generator C. phase sequence of power to the motor D. phase sequence of power to the generator

Description : The direction of propeller shaft rotation in a turbo-electric synchronous propulsion drive motor is changed by reversing the _____________. A. polarity of the propulsion motor B. polarity of the propulsion generator C. phase sequence of power to the motor D. phase sequence of power to the generator

Last Answer : Answer: C

As shown in the illustration, the D.C. motor's direction of rotation in changed by changing the _________________. EL-0101 A. polarity of the generator field B. direction of three-phase motor rotation C. direction of generator rotation D. polarity of the motor field

Description : As shown in the illustration, the D.C. motor's direction of rotation in changed by changing the _________________. EL-0101 A. polarity of the generator field B. direction of three-phase motor rotation C. direction of generator rotation D. polarity of the motor field

Last Answer : Answer: A

The direction of rotation of a D.C. series motor can be changed by?

Last Answer : The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

If the connections for the field and the armature on a DC motor are reversed, _____________. A. the motor will run as a generator B. the motor will not run C. the direction of rotation will be the same D. the direction of rotation will be reversed

Description : If the connections for the field and the armature on a DC motor are reversed, _____________. A. the motor will run as a generator B. the motor will not run C. the direction of rotation will be the same D. the direction of rotation will be reversed

Last Answer : Answer: C

The direction of rotation of a DC propulsion motor can be reversed by __________. A. reversing the field connections B. reversing the field and the armature connections C. wiring the field and armature in parallel D. wiring the field and armature in series

Description : The direction of rotation of a DC propulsion motor can be reversed by __________. A. reversing the field connections B. reversing the field and the armature connections C. wiring the field and armature in parallel D. wiring the field and armature in series

Last Answer : Answer: A

A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor magnets to lock in with the rotating flux of the stator C. the stator poles are dragged around due to the flux created by the excitation current D. the stator flux rotates in the opposite direction

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Two schoolgirls were traveling from the city to a dacha (summer cottage) on an electric train.'I notice,' one of the girls said 'that the dacha trains coming in the opposite direction pass us every 5 minutes. What do you think-how many dacha trains arrive in the city in an hour, given equal speeds in both directions?''Twelve, of course,' the other girl answered, 'because 60 divided by 5 equals 12.'The first girl did not agree. What do you think? -Riddles

Description : Two schoolgirls were traveling from the city to a dacha (summer cottage) on an electric train.'I notice,' one of the girls said 'that the dacha trains coming in the opposite direction pass us every 5 ... because 60 divided by 5 equals 12.'The first girl did not agree. What do you think? -Riddles

Last Answer : If the girls had been on a standing train, the first girl's calculations would have been correct, but their train was moving. It took 5 minutes to meet a second train, but then it took the second train ... the time between trains is 10 minutes, not 5, and only 6 trains per hour arrive in the city.

Two vectors are said to be equal if – (1) only their magnitudes are same (2) only their directions are same (3) both magnitude and direction are same (4) magnitudes are same but directions are opposite

Description : Two vectors are said to be equal if – (1) only their magnitudes are same (2) only their directions are same (3) both magnitude and direction are same (4) magnitudes are same but directions are opposite

Last Answer : (3) both magnitude and direction are same Explanation: If the magnitude as well as direction of two vectors are equal, then they are known as equal vectors. In other words, two vectors are ... headed towards the same direction. For two equal vectors, their directed line segments must be parallel.

What will be the direction of flow of water when a plant cell is placed in a hypotonic solution ? (a) Water will flow in both directions. (b) Water will flow out of the cell. (c) Water will flow into the cell. (d) No flow of water in any direction.

Description : What will be the direction of flow of water when a plant cell is placed in a hypotonic solution ? (a) Water will flow in both directions. (b) Water will flow out of the cell. (c) Water will flow into the cell. (d) No flow of water in any direction.

Last Answer : (c) Water will flow into the cell.

A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex

Description : A transmission mode that can transmit data in both the directions but transmits in only one direction at a time. a) simplex b) half duplex c) full duplex d) semi-duplex

Last Answer : b) half duplex

While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : While propagating through homogeneous, isotropic media, (A) Directions of both the fields are orthogonal (B) Both the fields are at right angles to the direction of propagation (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : Answer: Option C

In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on (A) The front face in one direction (B) The front face in both directions (C) The inner face in one direction (D) The inner face in both directions

Description : In T-shaped R C. retaining walls, the main reinforcement in the stem is provided on (A) The front face in one direction (B) The front face in both directions (C) The inner face in one direction (D) The inner face in both directions

Last Answer : Answer: Option C

Two vectors are said to be equal if (1) only their magnitudes are same (2) only their directions are same (3) both magnitude and direction are same (4) magnitudes are same but directions are opposite

Description : Two vectors are said to be equal if (1) only their magnitudes are same (2) only their directions are same (3) both magnitude and direction are same (4) magnitudes are same but directions are opposite 

Last Answer : both magnitude and direction are same

To increase the magnitude of a number by 23, you must shift the number how many times and in what direction?

Description : To increase the magnitude of a number by 23, you must shift the number how many times and in what direction?

Last Answer : Three to the left.

In order to change the direction of rotation of a D.C. motor_________. I. the field leads must be changed II. the input leads must be changed A. I only B. II only C. either I or II D. neither I or II

Description : In order to change the direction of rotation of a D.C. motor_________. I. the field leads must be changed II. the input leads must be changed A. I only B. II only C. either I or II D. neither I or II

Last Answer : Answer: A

Does the motor rotate with the coil ?

Description : Does the motor rotate with the coil ?

Last Answer : The motor's carbon brush rotates with the coil.

The d.c. series motor should always be started with load because (A) at no load, it will rotate at dangerously high speed. (B) it will fail to start. (C) it will not develop high starting torque. (D) all are true.

Description : The d.c. series motor should always be started with load because (A) at no load, it will rotate at dangerously high speed. (B) it will fail to start. (C) it will not develop high starting torque. (D) all are true.

Last Answer : (A) at no load, it will rotate at dangerously high speed.

Two layers of arimid yarn strength members encase the OFCC units. Why are these strength members stranded in opposing directions?

Description : Two layers of arimid yarn strength members encase the OFCC units. Why are these strength members stranded in opposing directions?

Last Answer : To minimize microbending of the fibers.

What type of antenna radiates in and receives energy from all directions at once?

Description : What type of antenna radiates in and receives energy from all directions at once?

Last Answer : Omnidirectional.

When light strikes a piece of white paper, the light is reflected in all directions. What do we call this scattering of light?

Description : When light strikes a piece of white paper, the light is reflected in all directions. What do we call this scattering of light?

Last Answer : Diffusion.