Define specific resistance.

Define specific resistance.
by

1 Answer

Answer :

The resistance of a unit volume of a substance.
by

Related questions

Define the temperature coefficient of resistance.

Description : Define the temperature coefficient of resistance.

Last Answer : The amount of increase in the resistance of a 1-ohm sample of the conductor per degree of temperature rise above 0º C

Define insulation resistance.

Description : Define insulation resistance.

Last Answer : The resistance to current leakage through the insulation.

Define charging, discharging, specific resistance and Ohm’s law.

Description : Define charging, discharging, specific resistance and Ohm’s law.

Last Answer : Charging:- It is the operation of the cell in which external source of current reverses the electrochemical cell reaction in order to restore the battery to its original fully charged state. ... across the conductor & inversely proportional to the resistance (R) of a conductor. 

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Description : In a dual-speed synchro system what determines the two specific speeds at which the data will be transmitted?

Last Answer : The gear ratio between the two transmitters.

Where is specific information about the computer you are to use contained?

Description : Where is specific information about the computer you are to use contained?

Last Answer : In the computer manufacturers or software designers user's manual.

What type of flowchart is constructed by the programmer to represent the sequence of operations the computer is to perform to solve a specific problem?

Description : What type of flowchart is constructed by the programmer to represent the sequence of operations the computer is to perform to solve a specific problem?

Last Answer : A programming flowchart.

Where would you find the wire identification system for a specific piece of equipment?

Description : Where would you find the wire identification system for a specific piece of equipment?

Last Answer : In the technical manual for the equipment

Oscillators that are turned on and off at a specific time are known as what type of oscillators?

Description : Oscillators that are turned on and off at a specific time are known as what type of oscillators?

Last Answer : Pulsed oscillators.

Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Description : Which performance parameter is the minimum amount of optical power required to achieve a specific bit-error rate (BER) in digital systems or a given signal-to-noise ratio (SNR) in analog systems?

Last Answer : Receiver sensitivity.

A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Description : A computer that is designed to perform a specific operation and usually satisfies the needs of a particular type of problem, is said to be what type of computer?

Last Answer : Special-purpose.

When computers use the cylinder method to store data on a hard disk pack, what three items make up the address that tells the computer where on a specific disk to store the data?

Description : When computers use the cylinder method to store data on a hard disk pack, what three items make up the address that tells the computer where on a specific disk to store the data?

Last Answer : . a. Cylinder number. b. Recording surface number.

A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Description : A mode filter is a device that attenuates specific modes propagating in the core of an optical fiber. What mode propagating along single mode fibers do mode filters eliminate?

Last Answer : Second-order mode.

What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.

When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Description : When you are using an ohmmeter to test a transistor for leakage, what is indicated by a low, but not shorted, reverse resistance reading?

Last Answer : A leaking transistor

When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Description : When you are testing the gain of an audio-frequency transistor with an ohmmeter, what is indicated by a 10-to-1 resistance ratio?

Last Answer : Normal gain.

Which transistor configuration has the highest input resistance?

Description : Which transistor configuration has the highest input resistance?

Last Answer : Common collector.

When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Description : When a bridge is used to measure resistance, what is the value of Rx if R1 equals 80 ohms, R2 equals 120 ohms, and R3 equals 280 ohms?

Last Answer : 420 ohms.

What is a typical light-to-dark resistance ratio for a photocell?

Description : What is a typical light-to-dark resistance ratio for a photocell?

Last Answer : 1:1000.

What is the resistance level of a photodiode in total darkness?

Description : What is the resistance level of a photodiode in total darkness?

Last Answer : Very high.

What resistance property is found in tunnel diodes but not in normal diodes?

Description : What resistance property is found in tunnel diodes but not in normal diodes?

Last Answer : Negative resistance.

A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.

Description : A shunt-type voltage regulator is connected in serial/parallel (which one) with the load resistance.

Last Answer : In parallel.

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease (which one) in the resistance of the regulating device.

Last Answer : An increase.

When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Description : When checking a diode with an ohmmeter, what is indicated by two high resistance measurements?

Last Answer : The diode is open or has a high-forward resistance.

A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

A shunt type voltage regulator is connected in series/parallel with the load resistance.

Description : A shunt type voltage regulator is connected in series/parallel with the load resistance.

Last Answer : Parallel

When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Description : When a series voltage regulator is used to control output voltages, any increase in the input voltage results in an increase/a decrease in the resistance of the regulating device.

Last Answer : Increase.

What is the typical back-to-forward resistance ratio of a good-quality diode?

Description : What is the typical back-to-forward resistance ratio of a good-quality diode?

Last Answer : 10-to-1 ratio.

As the dissipated power increases, what effect does this have on the resistance of a thermistor?

Description : As the dissipated power increases, what effect does this have on the resistance of a thermistor?

Last Answer : . It increases.

The point on the current curve of a gallium-arsenide semiconductor at which it begins to exhibit negative resistance is called what?

Description : The point on the current curve of a gallium-arsenide semiconductor at which it begins to exhibit negative resistance is called what?

Last Answer : Threshold.

What causes the negative-resistance property of tunnel diodes?

Description : What causes the negative-resistance property of tunnel diodes?

Last Answer : The tunneling action

Why is the negative-resistance magnetron often operated with reduced filament voltage?

Description : Why is the negative-resistance magnetron often operated with reduced filament voltage?

Last Answer : To reduce the effects of filament bombardment.

What starts the oscillations in a negative-resistance magnetron?

Description : What starts the oscillations in a negative-resistance magnetron?

Last Answer : The application of the proper magnetic field.

A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Last Answer : The bands are green, black, black, and gold.

What is the relationship between conductance and resistance?

Description : What is the relationship between conductance and resistance?

Last Answer : They are reciprocals of each other.

What term describes a material whose resistance remains relatively constant with changes in temperature?

Description : What term describes a material whose resistance remains relatively constant with changes in temperature?

Last Answer : Zero temperature coefficient.

Which temperature coefficient indicates a material whose resistance increases as temperature increases?

Description : Which temperature coefficient indicates a material whose resistance increases as temperature increases?

Last Answer : Positive.

Which wire has the least resistance? Wire A-copper, 1000 circular mils, 6 inches long. Wire B-copper, 2000 circular mils, 11 inches long.

Description : Which wire has the least resistance? Wire A-copper, 1000 circular mils, 6 inches long. Wire B-copper, 2000 circular mils, 11 inches long.

Last Answer : Wire B.

Compare the resistance of a conductor to that of an insulator.

Description : Compare the resistance of a conductor to that of an insulator.

Last Answer : Conductors have a very low resistance and insulators have a resistance that is so great that, for all practical purposes, they are nonconductors.

What happens to the resistance of copper when it is heated?

Description : What happens to the resistance of copper when it is heated?

Last Answer : It increases.

Using table 1-2, determine the resistance of 1,500 feet of AWG 20 wire at 25º C.

Description : Using table 1-2, determine the resistance of 1,500 feet of AWG 20 wire at 25º C.

Last Answer : 1,000 ft = 10.4 ohms1,500 ft = 1.5 × 0.4 = 15.6 ohms

List the three factors used to calculate resistance of a particular conductor in ohms.

Description : List the three factors used to calculate resistance of a particular conductor in ohms.

Last Answer : Length, cross-sectional area, and specific resistance of a unit volume of the substance from which the conductor is made

What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if a short occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance decreases, total current increases (b) Total resistance decreases, total current increases

What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Description : What is the effect on total resistance and total current in a circuit if an open occurs in (a) a parallel branch, and (b) in a series portion?

Last Answer : (a) Total resistance increases, total current decreases (b) Total resistance becomes infinite, total current is equal to zero

What effect does the internal resistance have on the rest of the circuit shown in figure 3-60?

Description : What effect does the internal resistance have on the rest of the circuit shown in figure 3-60?

Last Answer : Because of the 2-volt drop across the internal resistance, only 48 volts is available for the rest of the circuit.

What is the total resistance of the circuit shown in figure 3- 60?

Description : What is the total resistance of the circuit shown in figure 3- 60?

Last Answer : 25Ω

What is the total resistance of the circuit shown in figure 3- 59? (Hint: Redraw the circuit to simplify and then use equivalent resistances to compute for RT.)

Description : What is the total resistance of the circuit shown in figure 3- 59? (Hint: Redraw the circuit to simplify and then use equivalent resistances to compute for RT.)

Last Answer : 4Ω

What term identifies a single resistor that represents total resistance of a complex circuit?

Description : What term identifies a single resistor that represents total resistance of a complex circuit?

Last Answer : Equivalent resistor or Req.

Three resistors connected in parallel have values of 12 kΩ, 20kΩ, and 30kΩ. What is the equivalent resistance? A37. 6kΩ Q38. Two resistors connected in parallel have values of 10 kΩ and 30kΩ. What is eht equivalent resistance?

Description : Three resistors connected in parallel have values of 12 kΩ, 20kΩ, and 30kΩ. What is the equivalent resistance? A37. 6kΩ Q38. Two resistors connected in parallel have values of 10 kΩ and 30kΩ. What is eht equivalent resistance?

Last Answer : 7.5kΩ

Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms