Where would you find the wire identification system for a specific piece of equipment?

Where would you find the wire identification system for a  specific piece of equipment?
by

1 Answer

Answer :

In the technical manual for the equipment
by

Related questions

If a wire passes through a connector what portion of the aircraft wire identification number changes?

Description : If a wire passes through a connector what portion of the aircraft wire identification number changes?

Last Answer : Wire segment letter.

When you are testing a piece of equipment for intermodulation distortion, what should the output of the equipment look like?

Description : When you are testing a piece of equipment for intermodulation distortion, what should the output of the equipment look like?

Last Answer : An exact reproduction of the input.

What should you do if you become aware of a possible malfunction in a piece of electrical equipment?

Description : What should you do if you become aware of a possible malfunction in a piece of electrical equipment?

Last Answer : You should immediately report this condition to a qualified technician

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

What does the letter "N" indicate in the semiconductor identification system?

Description : What does the letter "N" indicate in the semiconductor identification system?

Last Answer : A semiconductor.

When you replace components, identification marks must meet what requirements?

Description : When you replace components, identification marks must meet what requirements?

Last Answer : They should be readable from a single point.

A resistor is handed to you for identification with the following color code: the first band is blue, followed by gray, green, gold, and brown. What is the resistor’s value?

Description : A resistor is handed to you for identification with the following color code: the first band is blue, followed by gray, green, gold, and brown. What is the resistor’s value?

Last Answer : 6,800,000 ohms (6.8 mega ohms), with 5% tolerance, and a 1% reliability level.

Strange playground equipment identification needed.

Description : Strange playground equipment identification needed.

Last Answer : Monkey bars, I think. GA for topics.

The following statement(s) is/are true concerning initial microbiologic diagnostic techniques. a. Appropriate expeditious transport of specimens to the microbiology laboratory is essential for obtaining accurate clinical information b. The use of potassium hydroxide in preparing a specimen slide for light microscopy will be useful in identification of anaerobic bacteria c. Antibiotic sensitivity is determined by exposing the specific microorganism to varying amounts of antibiotic with the concentration of the antibiotic inhibiting growth referred to as the MIC (minimal inhibitory concentration) d. Serum levels of antimicrobial agents should achieve in excess of a 4-to 8-fold increase over the MIC to be considered clinically efficacious.

Description : The following statement(s) is/are true concerning initial microbiologic diagnostic techniques. a. Appropriate expeditious transport of specimens to the microbiology laboratory is essential for obtaining accurate ... a 4-to 8-fold increase over the MIC to be considered clinically efficacious.

Last Answer : Answer: a, c, d Because most surgical infections are polymicrobial, specimens should be cultured for aerobic and anaerobic bacteria, as well as fungi. Although aerobic and aerotolerant ... fold increase over MIC during the peak serum level have been demonstrated to be clinically efficacious

Which of the following terms, according to Lazarus, refers to the process through which an event is evaluated with respect to what is at stake and what might and can be done? a) Cognitive appraisal The outcome of cognitive appraisal is identification of the situation as either stressful or non-stressful. b) Coping Coping consists of both cognitive and behavioral efforts made to manage the specific external or internal demand that taxes a person’s resources. c) Hardiness Hardiness is a personality characteristic that is composed of control, commitment, and challenge. d) Adaptation Lazarus believed adaptation was affected by emotion that subsumed stress and coping.

Description : Which of the following terms, according to Lazarus, refers to the process through which an event is evaluated with respect to what is at stake and what might and can be done? a) ... and challenge. d) Adaptation Lazarus believed adaptation was affected by emotion that subsumed stress and coping.

Last Answer : a) Cognitive appraisal The outcome of cognitive appraisal is identification of the situation as either stressful or non-stressful.

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

What system is currently used by all branches of the military to identify test equipment?

Description : What system is currently used by all branches of the military to identify test equipment?

Last Answer : Joint Electronics Type Designation System (JETDS).

What agencies provide training, tools, equipment, and certification of the 2M system?

Description : What agencies provide training, tools, equipment, and certification of the 2M system?

Last Answer : Naval Sea Systems Command (NAVSEASYSCOM) and Naval Air Systems Command (NAVAIRSYSCOM)

What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Description : What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Last Answer : Intrinsic.

When light strikes a piece of white paper, the light is reflected in all directions. What do we call this scattering of light?

Description : When light strikes a piece of white paper, the light is reflected in all directions. What do we call this scattering of light?

Last Answer : Diffusion.

How do you fasten a piece of wire to a battery?

Description : How do you fasten a piece of wire to a battery?

Last Answer : You don’t, unless you’re planning to throw the shaver away when the battery is dead. Use springs to maintain contact.

A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Description : A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Last Answer : A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Description : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

Last Answer : `1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

A piece of wire of resistance 4 ohm s is bent through `180^(@)` at its mid point and the two halves are twisted together, then the resistance is

Description : A piece of wire of resistance 4 ohm s is bent through `180^(@)` at its mid point and the two halves are twisted together, then the resistance is

Last Answer : A piece of wire of resistance 4 ohm s is bent through `180^(@)` at its mid point and the two halves ... `8Omega` B. `1Omega` C. `2Omega` D. `5Omega`

How much current can flow through a piece if fuse wire before it melts?

Description : How much current can flow through a piece if fuse wire before it melts?

Last Answer : What is the answer ?

How can Ohm law be used to calculate the electrical resistance of a piece of wire?

Description : How can Ohm law be used to calculate the electrical resistance of a piece of wire?

Last Answer : Ohm's law establishes the relationship between the current flowing in a conductor (represented by I), the potential difference across the two ends of the conductor (represented by P), and the resistance offered ... all materials. This is not true, as it only applies to 'linear' or 'ohmic' materials.

What happens when a iron nail or a piece of aluminium wire is dipped in concentrated nitric acid?

Description : What happens when a iron nail or a piece of aluminium wire is dipped in concentrated nitric acid?

Last Answer : Iron nail or aluminium wire does not react with concentrated nitric acid. It makes iron more passive.

The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Description : The piece of hardware that converts your computers digital signal to an analog signal that can travel over telephone lines is called a: a) Red Wire b) Blue Cord c) Tower d) Modem e) None of These

Last Answer : d) Modem

Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Description : Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Last Answer : d)piece of coal

A COPPER strip is placed in one compartment of a voltaic cell and a wire connects this strip to a piece of metal in the other compartment through a voltmeter. If the voltmeter reads zero, the other piece of metal is: w) zinc x) mercury y) silver z) copper

Description : A COPPER strip is placed in one compartment of a voltaic cell and a wire connects this strip to a piece of metal in the other compartment through a voltmeter. If the voltmeter reads zero, the other piece of metal is: w) zinc x) mercury y) silver z) copper

Last Answer : ANSWER: Z -- COPPER

What piece of workout equipment or weight loss program did you purchase from a TV infomercial?

Description : What piece of workout equipment or weight loss program did you purchase from a TV infomercial?

Last Answer : None. Never. Zip. It all just seems ridiculous to me. That guy with the ponytail cracks me up.

I am a piece of equipment that has hundreds of uses; I can even be used to save a life! I am not a medicine and I am non-electric. I come in all shapes and sizes. It doesn't require much specialist training to be used. What am I? -Riddles

Description : I am a piece of equipment that has hundreds of uses; I can even be used to save a life! I am not a medicine and I am non-electric. I come in all shapes and sizes. It doesn't require much specialist training to be used. What am I? -Riddles

Last Answer : A rope.

What piece of equipment would most likely be used to separate the red blood cells from blood plasma?

Description : What piece of equipment would most likely be used to separate the red blood cells from blood plasma?

Last Answer : Need answer

What piece of equipment would iron and other metallic objects use to separate?

Description : What piece of equipment would iron and other metallic objects use to separate?

Last Answer : A magnet.

When paddling a canoe a night witch piece of equipment should be carried to help avoid a collision?

Description : When paddling a canoe a night witch piece of equipment should be carried to help avoid a collision?

Last Answer : Need answer

Which piece of commercial Gym Equipment is best for me to improve my overall fitness?

Description : Which piece of commercial Gym Equipment is best for me to improve my overall fitness?

Last Answer : I think the Jillian Michaels Body Shop is a perfect piece of equipment for anyone looking to get a good kick of fitness everyday. It's very cost effective at only 200$ for the entire piece of equipment that works out every part of your body!

What piece of home gym equipment is best for a quick work out?

Description : What piece of home gym equipment is best for a quick work out?

Last Answer : If you are looking for a quick workout your best bet will be a machine that will combine cardio and strength training. You will want to check out a great elliptical machine for your workout needs.

What is the first piece of home exercise equipment I should buy?

Description : What is the first piece of home exercise equipment I should buy?

Last Answer : Depending on which muscle groups you would like to start working on, I would suggest a multi-gym or just some simple weight bars/barbells. Most people tend to gravitate toward the bench press weight ... I would shy away from that unless you are wanting to focus only on your chest and shoulders.

Is an elliptical a good piece of gym fitness equipment for my home?

Description : Is an elliptical a good piece of gym fitness equipment for my home?

Last Answer : Yes, the elliptical is a good piece of gym equipment to have in your home because it gives you a smooth comfortable workout that simulates walking or running. Also you can use it for target areas by changing the incline.

An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. The maximum allowable operating temperature of the machine. B. The temperature of the machine at the time the resistance reading was taken. C. The normal temperature rise of the machine. D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Description : An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. ... D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Last Answer : Answer: B

Which of the following relatively small misstatements most likely could have a material effect on an entity’s financial statements? a. A piece of obsolete office equipment that was not retired. b. An illegal payment to a foreign official that was not recorded. c. A petty cash fund disbursement that was not properly authorized. d. An uncollectible account receivable that was not written off.

Description : Which of the following relatively small misstatements most likely could have a material effect on an entity's financial statements? a. A piece of obsolete office equipment that was not retired. ... that was not properly authorized. d. An uncollectible account receivable that was not written off.

Last Answer : An illegal payment to a foreign official that was not recorded.

What piece of equipment would you use for floating on the sea?

Description : What piece of equipment would you use for floating on the sea?

Last Answer : AQUAPLANE

What piece of equipment would you use to go diving in the sea, an aqualung or an aquaplane?

Description : What piece of equipment would you use to go diving in the sea, an aqualung or an aquaplane?

Last Answer : AQUALUNG

Bob Roberts of Roberts Construction is planning to buy a piece of earth-moving equipment. He would most likely base his purchase decision on ______ of the alternative machines: A)description B)sampling C)inspection D)reputation

Description : Bob Roberts of Roberts Construction is planning to buy a piece of earth-moving equipment. He would most likely base his purchase decision on ______ of the alternative machines: A)description B)sampling C)inspection D)reputation

Last Answer : C)inspection

What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Description : What is an advantage of using a resistance soldering iron when soldering wire to a connector?

Last Answer : The soldering tips are hot only during the brief period of soldering the connection, thus minimizing the chance of burning the wire insulation or connector inserts.

What is used to tie wire bundles in high-temperature areas?

Description : What is used to tie wire bundles in high-temperature areas?

Last Answer : High-temperature, pressure-sensitive tape.

What size wire bundles require double lace?

Description : What size wire bundles require double lace?

Last Answer : Bundles that are 1 inch or larger in diameter

Why is flat tape preferred instead of round cord when wire bundles are laced?

Description : Why is flat tape preferred instead of round cord when wire bundles are laced?

Last Answer : Round cord has a tendency to cut into the wire insulation.

Why should wire be stripped 1/32 inch longer than the depth of the solder barrel?

Description : Why should wire be stripped 1/32 inch longer than the depth of the solder barrel?

Last Answer : To prevent burning the insulation during the soldering process and to allow the wire to flex easier at a stress point.

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

Why are the ends of the wire clamped down after a Western Union splice is made?

Description : Why are the ends of the wire clamped down after a Western Union splice is made?

Last Answer : To prevent damage to the tape insulation.

What tool should be used to strip aluminum wire?

Description : What tool should be used to strip aluminum wire?

Last Answer : Knife.

What is the preferred method for stripping wire?

Description : What is the preferred method for stripping wire?

Last Answer : By use of a wire-stripping tool