So what wave length would you need for a industrial microwave to melt gold?

1 Answer

Answer :

You aren’t supposed to put gold in a microwave. You run the risk of bad things.

Related questions

Description : A wavelength of 0.3 m is produced in air and it travels at a speed of 300 m/s. Then it will be an (1) Audible wave (2) Infrasonic wave (3) Ultrasonic wave (4) Microwave

Last Answer : (1) Audible wave

Description : Which electromagnetic radiation is used for satellite communication? (1) Ultraviolet (2) Infrared (3) Microwave (4) Millimeter wave

Last Answer : (3) Microwave Explanation: Microwave electromagnetic radiation is used for satellite communication.

Description : A wavelength of 0.3 m is produced in air and it travels at a speed of 300 m/s. Then it will be an (1) Audible wave (2) Infrasonic wave (3) Ultrasonic wave (4) Microwave

Last Answer : Audible wave

Description : Which electromagnetic radiation is used for satellite communication ? (1) Ultraviolet (2) Infrared (3) Microwave (4) Millimeter wave

Last Answer : Microwave

Description : Is it possible to get a jeweler to melt your gold into a necklace?

Last Answer : Yes it's totally fine, but make sure that the jeweler you are contacting is good and can reach the bare minimum capabilities. In short a professional jeweler.

Description : Is propane gas buning to melt gold a physical change or a chemical change?

Last Answer : Need answer

Description : The snow on the mountains does NOT melt all at once when it is heated by the sum because: (1) It becomes very hard (2) It reflects most of the heat from the sum (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : (2) It reflects most of the heat from the sum Explanation: Newly formed snow reflects about 90 per cent of the sunlight that falls upon it. This means that the sun is powerless to melt clean snow. And when ... on a spring day because of the sun's heat. It melts because of the warm air from the sea.

Description : Why does ice coverfed in sawdust ct melt quickly? (1) Sawdust does not allow the air to touch the ice (2) The water is absorbed by sawdust (3) Sawdust is a bad conductor of heat (4) Sawdust is good conductor of heat

Last Answer : (3) Sawdust is a bad conductor of heat Explanation: Ice needs to absorb heat energy to melt and become water (called latent heat of fusion). Since saw-dust is a poor conductor of heat, it takes ... required heat energy. This allows ice to remain in solid state for more time when packed in saw dust.

Description : What changes will happen to a bowl of ice and water kept at exactly zero degree Celsius? (1) All ice will melt (2) All water will become ice (3) No change will happen (4) Only some ice will melt

Last Answer : (3) No change will happen Explanation: Fresh water cooled to zero (0) degree Celsius and subjected to additional loss of heat energy normally will freeze. A mixture of fresh water and ice ... the usual freezing point while remaining liquid. Such cloud droplets are composed of super cooled water.

Description : How much mechanical work must be done to completely melt 1 gram of ice at 0°C? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Last Answer : (2) 80 J Explanation: When water at 0 degree Celsius freezes, each gram of water gives off 80 calories. The temperature of the water stays at 0 degree C until every drop has frozen. When ... heat-80 calories for each gram of ice-and its temperature remains unchanged until it has completely melted.

Description : What is a calorie? w) amount of heat required to raise one gram of water one degree Celsius. x) amount of work required to move one gram of water by one centimeter. y) amount of heat required to melt ice. z) amount of heat required to raise one gram of water one degree Fahrenheit

Last Answer : ANSWER: W -- AMOUNT OF HEAT REQUIRED TO RAISE ONE GRAM OF WATER ONE DEGREE CELSIUS

Description : Why does ice covered in sawdust not melt quickly ? (1) Sawdust does not allow the air to touch the ice (2) The water is absorbed by sawdust (3) Sawdust is a bad conductor of heat (4) Sawdust is good conductor of heat

Last Answer : Sawdust is a bad conductor of heat

Description : How much mechanical work must be done to completely melt 1 gram of ice at 0°C ? (1) 4.2 J (2) 80 J (3) 336 J (4) 2268 J

Last Answer : 80 J

Description : What changes will happen to a bowl of ice and water kept at exactly zero degree Celsius ? (1) All ice will melt (2) All water will become ice (3) No change will happen (4) Only some ice will melt

Last Answer : No change will happen

Description : The snow on the mountains does NOT melt all at once when it is heated by the sun because: (1) it becomes very hard (2) it reflects most of the heat from the sun (3) it has a low specific heat capacity (4) it has a high latent heat of fusion

Last Answer : it reflects most of the heat from the sun

Description : Is it possible to do something about it so that plates with gold decoration do not spark in the microwave oven?

Last Answer : Plates with gold decoration are not intended for microwave ovens. Both the plates and the oven are destroyed. The gold decoration contains metal particles that react with the burning ... the microwave. Utensils directly intended for microwave ovens are also manufactured and commonly sold.

Description : A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Last Answer : C. Troposcatter

Description : Communications bandwidth that has the highest capacity and is used by microwave, cable and fibre optics lines is known as: (A) hyper-link (B) broadband (C) bus width (D) carrier wave

Last Answer : Answer: B 

Description : Sun appears red in colour at sun-rise and sunset due to – (1) the fact that sun emits only red colour at that time (2) red light having longer wave length scatters away (3) that sun Comes out of the mountains (4) that all other colours scatter away except red

Last Answer : (4) that all other colours scatter away except red Explanation: According to Rayleigh's law, the intensity of scattered light varies inversely as the fourth power of its wavelength. Sunlight consists of ... have to travel a larger part of the atmosphere because they are very close to the horizon.

Description : When we hear a sound, we can identify its source from ______. (1) wave length of sound (2) the overtones present in the sound (3) the intensity of sound (4) the amplitude of sound

Last Answer : (2) the overtones present in the sound Explanation: An overtone is any frequency higher than the fundamental frequency of a sound. Using the model of Fourier analysis, the fundamental and the overtones together are called partials.

Description : The quality or tone of a musical sound produced by a stringed instrument depends on – (1) frequency of vibration (2) length of the strings in the instrument (3) Amplitude of vibration (4) wave form of the sound

Last Answer : (4) wave form of the sound Explanation: The timbre or quality of a sound depends on its wave form, which varies with the number of over-tones, or harmonics, that are present, their ... particular musical sound have a different sound from another, even when they have the same pitch and loudness.

Description : If a carrier wave of 1000 kHz is used to carry the signal, the length of transmitting antenna will be equal to _______. (1) 300 m (2) 30 m (3) 3 m (4) 0.3 m

Last Answer : (1) 300 m Explanation: h = 3 × 108/106 = 300 m

Description : A string of length L is fixed between two points. If a standing wave of 5 nodes is produced, what is the relationship between the string's length, L, and its wavelength?

Last Answer : ANSWER: WAVELENGTH = 1/2 L

Description : The quality or tone of a musical sound produced by a stringed instrument depends on (1) frequency of vibration (2) length of the strings in the instrument (3) Amplitude of vibration (4) wave form of the sound

Last Answer : wave form of the sound

Description : Sun appears red in colour at sunrise and sunset due to (1) the fact that sun emits only red colour at that time (2) red light having longer wave length scatters away (3) that sun comes out of the mountains (4) that all other colours scatter away except red

Last Answer :  that all other colours scatter away except red

Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Last Answer : A. 0.871 μW

Description : Heating 235 g of water from 22.6 degrees C to 94.4 degrees C in a microwave oven requires 7.06x10^4 J of energy. If the microwave frequency is 2.88x10^10 Hz, how many quanta are required to supply the 7.06x10^4 J?

Last Answer : answer:Guidelines. I don’t mean to be the bearer of bad news…

Description : How does a microwave oven heat up food even though it emits no thermal radiation? -Physics

Last Answer : A microwave oven does emit thermal radiation to heat up food. Microwave radiation is thermal radiation. For some reason, most sources have a mistaken notion that thermal radiation = infrared radiation ... a broad spectrum of frequencies with a certain shape that depends on the emitter's temperature.

Description : How much extra radiation am I exposed to if I stick my hand in the microwave right after it turns off? -Physics

Last Answer : You are actually exposed to less radiation if you stick your hand in a properly functioning microwave oven right after it turns off. First of all, the microwaves emitted by a microwave oven are not ... the radiation you are exposed to is so low-energy that there is nothing to be concerned about.

Description : Indicate the correct arrangement for electromagnetic radiation in order of their increasing wavelength. (1) Microwave, infrared, visible. X-rays (2) X-rays, visible, infrared, microwave (3) Visible, infrared, microwave, X-rays (4) X-rays, infrared, visible, microwave

Last Answer : (4) X-rays, infrared, visible, microwave Explanation: The Electromagnetic spectrum in order of decreasing energy, thus increasing wavelength : Gamma Rays-wavelength: 0.01 nm ; X-rays -1 nm ; Ultra-violet Rays-0.1 ... -10 m ; and Very High Frequency (VHF) and Ultra High Frequency (UHF): 10 m-10 cm.

Description : Transition ions absorb light in – (1) infrared region (2) ultraviolet region (3) microwave region (4) visible region

Last Answer : (4) visible region Explanation: Transition metal ions have an incomplete set of 3d electrons. Changes in the energy of these electrons correspond to the energy of visible light. The absorption of visible light by these ions lend colour to gems.

Description : In the remote control of television, electromagnetic waves used are – (1) ultraviolet (2) microwave (3) radiowave (4) infrared

Last Answer : (4) infrared Explanation: All electromagnetic waves used are infrared.

Description : The light rays used for eliminating bacteria – (1) X-rays (2) infrared rays (3) microwave radiation (4) ultra-violet radiation

Last Answer : (4) ultra-violet radiation Explanation: Ultraviolet radiation is used to kill microorganisms, molds and fungus in various environmental applications. UV sterilization is used for air- ... water purification, aquarium and pond maintenance, laboratory hygiene and food and beverage protection.

Description : The radiant energy having lowest energy is – (1) gamma rays (2) UV rays (3) visible light (4) microwave radiation

Last Answer : (4) microwave radiation Explanation: The parts of the electromagnetic spectrum, arranged from highest energy to lowest, are gamma rays, Xrays, Ultraviolet light, visible light, infrared light, microwaves, and radio waves.

Description : Night photography and photopraphy in mist and fog are possible using – (1) ultra-violet radiation (2) infra-red radiation (3) microwave radiation (4) gamma radiation

Last Answer : (2) infra-red radiation Explanation: Infrared is used in night vision equipment when there is insufficient visible light to see. Night vision devices operate through a process involving the ... then amplified by a chemical and electrical process and then converted back into visible light.

Description : A typical microwave oven produces microwave radiation with a wavelength of: w) 3 meters x) 3 x 10-2 meters (read: 3 times 10 to the minus 2 meters) y) 3 x 10 -6 meters (read: 3 times 10 to the minus 6 meters) z) 3 x 10-9 meters (read: 3 times 10 to the minus 9 meters) 

Last Answer : ANSWER: X -- 3 x 10-2 METERS

Description : Transition ions absorb light in : (1) infrared region (2) ultraviolet region (3) microwave region (4) visible region

Last Answer : visible region

Description : Indicate the correct arrangement for electromagnetic radiation in order of their increasing wavelength. (1) Microwave, infrared, visible. X-rays (2) X -rays, visible, infrared, microwave (3) Visible, infrared, microwave, X-rays (4) X - rays, infrared, visible, microwave.

Last Answer : X - rays, infrared, visible, microwave.

Description : In the remote control of television, electromagnetic waves used are (1) ultraviolet (2) microwave (3) radiowave (4) infrared

Last Answer : infrared

Description : Night photography and photopraphy in mist and fog are possible using (1) ultra-violet radiation (2) infra-red radiation (3) microwave radiation (4) gamma radiation

Last Answer : infra-red radiation

Description : The radiant energy having lowest energy is (1) gamma rays (2) UV rays (3) visible light (4) microwave radiation

Last Answer : microwave radiation 

Description : The light rays used for eliminating bacteria (1) X-rays (2) infrared rays (3) microwave radiation (4) ultra-violet radiation

Last Answer : ultra-violet radiation

Description : Does ice melt faster in humid conditions (high relative humidity), or low?

Last Answer : Humid air is denser then dry air. The more air molecules that there are surrounding the ice, the more heat exchange will take place over dry air (given a constant air and surface temperature and over a ... air will draw heat from the ice and cause it to melt more quickly than less dense dry air.

Description : What alloy is created when you melt and mix all metals on the periodic table in equal portions?

Last Answer : You can’t mix them all, their melting points are vastly different.

Description : Does cottage cheese melt?

Last Answer : Not really, it still stays pretty curdy in Lasagne. I suppose you could puree it first or mash it down more.

Description : Why doesn't human fat melt?

Last Answer : answer:I'm just guessing. I assume the fat in our bodies needs to be heated above 105ish degrees. When we sit in the sun we still maintain a 98.6ish temperature unless we are experiencing heat stroke. ... likely to be at around 400 to 450 degrees. In a pan it still is quite a high temperature.

Description : How do you melt colors on a photo print?

Last Answer : You can do that while the print is still wet, and spray with a solvent to make the ink run. I don;t know which solvent, you’ll have to experiment a bit.

Description : How many British thermal units would it take melt the core of the planet Mars?

Last Answer : All I know is that my ex-husband could blow Terra-Wind that would melt Mars.

Description : Will Everclear (alcohol) cause vegetarian gelcaps to melt?

Last Answer : What the hell is a “really strong herbal concoction”? And while I suspect that the answer will be “yes”, it’s easy enough to test. Just drop a gelcap into a bit of everclear and see what happens.

Description : How can I melt the hearts of the check-writers at EasyJet?

Last Answer : The 1st Ferengi Rule of acquisition clearly states: “Once you have their money, never give it back.” But since they are most likely not full Ferengi, you might have luck by kidnapping one of their children and demanding ransom.