So what is the correct answer? What is the "R" value of 1" of HDPE? Is it 3.33?

So what is the correct answer? What is the "R" value of 1" of HDPE? Is it 3.33?
by

1 Answer

Answer :

1 inch pipe = maximum initial thermal conductivity of 0.18 Btu-in/hrft2—° F.
by

Related questions

What is the r-value of HDPE (high density polyethylene)?

Description : What is the r-value of HDPE (high density polyethylene)?

Last Answer : Great question for Google.

What is the full form of HDPE ?

Last Answer : HDPE - High Density Poly Ethylene

Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

The moment of inertia of a semi-circle of radius r with respect to a centroidal axis parallel to the diameter is a.0.33 r2 b.0.11 r2 c.0.055 r2 d.0.05 r2 e.0.22 r2

Description : The moment of inertia of a semi-circle of radius r with respect to a centroidal axis parallel to the diameter is a.0.33 r2 b.0.11 r2 c.0.055 r2 d.0.05 r2 e.0.22 r2

Last Answer : b. 0.11 r2

If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Description : If the values of 'C' and 'R' shown in the illustration were 1 microfarad and 3 Megohms respectively, at what listed time would 'C' be considered fully charged? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: D

If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Description : If the values of C and R shown in the illustration were 1-microfarad and 3- Megohms respectively, which of the listed intervals would equal one 'time constant'? EL-0086 A. 0.33 second B. 3 seconds C. 6 seconds D. 15 seconds

Last Answer : Answer: B

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Description : If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Last Answer : 13.33 ft^3/lbm

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Description : V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

Last Answer : Ans: R=40 ohm, L=33.3 micro farads

Total of the ages of P, Q and R at present is 99 years. Eight years ago, the ratio of their ages was 4: 5: 6. What is the age of Q at present a) 44 b) 30 c) 45 d) 33

Description : Total of the ages of P, Q and R at present is 99 years. Eight years ago, the ratio of their ages was 4: 5: 6. What is the age of Q at present a) 44 b) 30 c) 45 d) 33

Last Answer : D Let their ages 8 years ago is4x, 5x and 6x years.  4x+8+5x + 8 + 6x + 8= 99 hence x= 5 Q’s present age = (5x + 8)  =33 years

10) i) \( A=\{a, b, c\} \) and \( B=\{x, 4\} \). Write \( A \times B \)ii) Graph of the function \( f: R \rightarrow R \) is given below.a) Write the value of \( f(x) \)b) Write the range of \( f(x) \)c) Identify The function and choose the correct answer.

Description : 10) i) \( A=\{a, b, c\} \) and \( B=\{x, 4\} \). Write \( A \times B \)ii) Graph of the function \( f: R \rightarrow R \) is given below.a) Write the value of \( f(x) \)b) Write the range of \( f(x) \)c) Identify The function and choose the correct answer.

Last Answer : 10) i) \( A=\{a, b, c\} \) and \( B=\{x, 4\} \). Write \( A \times B \) ii) ... of \( f(x) \) c) Identify The function and choose the correct answer.

Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the figure represents. (ii)Identify Ain the figure and mention its function. (iii)Mention the fate of the inner cell mass after implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Description : Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the ... implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Last Answer : (i)The stage is blastocyst. (ii) A—Trophoblast. It helps in attachment to endometrium during implantation and provides nourishment to developing embryo. (iii) Inner cell mass acts as precursor to embryo ... into ectoderm and endoderm. (iv) Stem cells are located in inner cell mass of embryo.

What are the primary colors of Light? 33 A. White, Black, Blue B. Red, Yellow, Blue C. Red, Orange, Blue D. Red, Green, Blue (Answer)

Description : What are the primary colors of Light? 33 A. White, Black, Blue B. Red, Yellow, Blue C. Red, Orange, Blue D. Red, Green, Blue (Answer)

Last Answer : D. Red, Green, Blue (Answer)

How many teeth are there in human mouth? A. 30 B. 33 C. 32 (Answer) D. 31

Description : How many teeth are there in human mouth? A. 30 B. 33 C. 32 (Answer) D. 31

Last Answer : C. 32 (Answer)

Vertebral Column in human beings consists of how many vertebrae? A. 5 B. 10 C. 12 D. 33 (Answer)

Description : Vertebral Column in human beings consists of how many vertebrae? A. 5 B. 10 C. 12 D. 33 (Answer)

Last Answer : D. 33 (Answer)

What are the commonest congenitally missing teeth:VERY CONTROVERSIAL BUT SEE THE SAMPLE QUESTIONS FROM ADC IT’S THE ANSWER A. 12, 22 B. 35, 45 ACC TO CAMERON C. 15, 25 D. 33, 43

Description : What are the commonest congenitally missing teeth:VERY CONTROVERSIAL BUT SEE THE SAMPLE QUESTIONS FROM ADC IT’S THE ANSWER A. 12, 22 B. 35, 45 ACC TO CAMERON C. 15, 25 D. 33, 43

Last Answer : A. 12, 22

If the median of data (arranged in ascending order) 31, 33, 35, x, x+10, 48, 48, 50 is 40, then find value of x. -Maths 9th

Description : If the median of data (arranged in ascending order) 31, 33, 35, x, x+10, 48, 48, 50 is 40, then find value of x. -Maths 9th

Last Answer : Given data is 31, 33, 35, x, x+10, 48, 48, 50 Number of observation = 8 (even) Median = Value of (8/2)th observation + Value of (8/2+1)th observation / 2 Value of 4th observation + Value of 5th observation / 2 = x + x + 10 / 2 = x + 5 ∴ x + 5 = 40 ⇒ x = 35

If the median of data (arranged in ascending order) 31, 33, 35, x, x+10, 48, 48, 50 is 40, then find value of x. -Maths 9th

Description : If the median of data (arranged in ascending order) 31, 33, 35, x, x+10, 48, 48, 50 is 40, then find value of x. -Maths 9th

Last Answer : Given data is 31, 33, 35, x, x+10, 48, 48, 50 Number of observation = 8 (even) Median = Value of (8/2)th observation + Value of (8/2+1)th observation / 2 Value of 4th observation + Value of 5th observation / 2 = x + x + 10 / 2 = x + 5 ∴ x + 5 = 40 ⇒ x = 35

In Fig. 10.33, if OA = 10cm, AB = 16 cm and OD perpendicular to AB. Find the value of CD. -Maths 9th

Description : In Fig. 10.33, if OA = 10cm, AB = 16 cm and OD perpendicular to AB. Find the value of CD. -Maths 9th

Last Answer : Solution :- As OD is perpendicular to AB ⇒ AC = AB (Perpendicular from the centre to the chord bisects the chord) ∴ AC = AB/2 = 8cm In right △OCA, OA2 = AC2 + OC2 (102) = 82 + OC2 OC2 = 100 - 64 OC2 = 36 ... = 6cm CD = OD - OC = 10 - 6 = 4cm [∴ OA = OD = 10cm (radii)]

Does the numerical expression of (2x4)+(3x3) have a value of 33?

Description : Does the numerical expression of (2x4)+(3x3) have a value of 33?

Last Answer : 172x4=8+(3x3)=173x3=99+8=17

A company has issued a 20-year bond at Rs. 1000 par value with a coupon rate of 10 per cent. The required rate of return on similar bonds is 12 per cent. What is the current value of the bond ? (A) Rs. 905•33 (B) Rs. 850•45 (C) Rs. 833•33 (D) Rs. 820•20

Description : A company has issued a 20-year bond at Rs. 1000 par value with a coupon rate of 10 per cent. The required rate of return on similar bonds is 12 per cent. What is the current value of the bond ? (A) Rs. 905•33 (B) Rs. 850•45 (C) Rs. 833•33 (D) Rs. 820•20

Last Answer : Answer: Rs. 905•33

To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to assume that the appropriate cost of capital is 10% and the appropriate risk-free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Description : To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to ... -free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Last Answer : C. Rs.33,346

Transmission by post of value-payable postal articles explained in a) Section 34 b) Section 33 c) Section 20 d) None of these

Description : Transmission by post of value-payable postal articles explained in a) Section 34 b) Section 33 c) Section 20 d) None of these

Last Answer : a) Section 34

Efficiency of power transmission (η) through a circular pipe is given by (ht - hf )/ht , which has a maximum value of __________ percent. (A) 33:3 (B) 50 (C) 66.6 (D) 88.8

Description : Efficiency of power transmission (η) through a circular pipe is given by (ht - hf )/ht , which has a maximum value of __________ percent. (A) 33:3 (B) 50 (C) 66.6 (D) 88.8

Last Answer : (C) 66.6

If the critical shear stress of a channel is XC, then the average value of shear stress required to move the grain on the bank is (A) 0.5 XC (B) 0.75 TC (C) XC (D) 1.33 TC

Description : If the critical shear stress of a channel is XC, then the average value of shear stress required to move the grain on the bank is (A) 0.5 XC (B) 0.75 TC (C) XC (D) 1.33 TC

Last Answer : Answer: Option B

The approximate value of the ratio between direct tensile strength and flexural strength is (A) 0.33 (B) 0.5 (C) 0.75 (D) 1.0

Description : The approximate value of the ratio between direct tensile strength and flexural strength is (A) 0.33 (B) 0.5 (C) 0.75 (D) 1.0

Last Answer : Answer: Option B

The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Description : The value of 1 mm of Hg is equal to  A. 1.333 N/m2  B. 13.33 N/m2  C. 133.3 N/m2  D. 1333 N/m2

Last Answer : Answer: C

Find the root value of 36.1 / 102.4 (1) 61 / 34 (2) 19 / 31 (3) 19 / 32 (4) 19 / 33

Description : Find the root value of 36.1 / 102.4 (1) 61 / 34 (2) 19 / 31 (3) 19 / 32 (4) 19 / 33

Last Answer : (3) 19 / 32

What is the decimal value of 2-1? 33) A) 0.1 B) 0.25 C) 0.5 D) 0.05

Description : What is the decimal value of 2-1? 33) A) 0.1 B) 0.25 C) 0.5 D) 0.05

Last Answer : C) 0.5

Using p=3, q=13, d=7 and e=3 in the RSA algorithm, what is the value of ciphertext for a plain text 5? (A) 13 (B) 21 (C) 26 (D) 33

Description : Using p=3, q=13, d=7 and e=3 in the RSA algorithm, what is the value of ciphertext for a plain text 5? (A) 13 (B) 21 (C) 26 (D) 33

Last Answer : Answer: Marks to all Explanation: p=3, q=13, d=7, e=3, M=5, C=? C = Me mod n n = p*q  = 3*13 = 39 C = 53 mod 39 = 8 Answer is 8.

Is O.J's 33 yr. sentence for armed robbery correct, if not, why did it stand?

Description : Is O.J's 33 yr. sentence for armed robbery correct, if not, why did it stand?

Last Answer : There were a lot of charges. A few years for this, a few for that, and it adds up to 33 years.

Given: DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass at destination 43,193kg b. Estimated landing mass at destination 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Description : Given: DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass ... destination 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Last Answer : b. Estimated landing mass at destination 43,295kg

DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass at destination 43,193kg b. Estimated landing mass at destination 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Description : DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass at destination ... 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Last Answer : b. Estimated landing mass at destination 43,295kg

In the following question, an Assertion (A) is followed by a Corresponding Reson (R). Mark the correct answer.

Description : In the following question, an Assertion (A) is followed by a Corresponding Reson (R). Mark the correct answer.

Last Answer : In the following question, an Assertion (A) is followed by a Corresponding Reson (R). Mark the ... mammals C. Skull of frog D. Sperm of mammals

The following questions consists of 2 statements – Assertion (A) and Reason (R). Answer these questions selecting the appropriate option given below: (a) Both A and R are true and R is the correct explanation for A (b) Both A and R are true and R is not the correct explanation for A (c) A is true but R is false (d) A is false but R is true

Description : The following questions consists of 2 statements - Assertion (A) and Reason (R). Answer these questions selecting the appropriate option given below: (a) Both A and R are true and R is the correct explanation for A (b) ... explanation for A (c) A is true but R is false (d) A is false but R is true

Last Answer : (b) Both A and R are true and R is not the correct explanation for A

Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. Select your answer based on the coding system given below. (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not a correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Large size stones are required in stone revetment in shore protection. Reason R: Resistance of stone to wave force is proportional to its volume and wave force is proportional to the exposed area of the stone. ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Assertion A: For a given depth of cut, the output of a power shovel can be increased by decreasing the angle of swing. Reason R: If the angle of swing is decreased, the cycle time will be decreased. Select the correct answer. (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: For a given depth of cut, the output of a power shovel can be increased by decreasing the angle of swing. Reason R: If the angle of swing is decreased, the cycle time will be decreased. Select the ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Assertion A: Marine structures are made specially bulky and strong. Reason R: Sea insects result in undermining of the hardest and the soundest building material Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Marine structures are made specially bulky and strong. Reason R: Sea insects result in undermining of the hardest and the soundest building material Select your answer based on the coding system given below: (A) ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Assertion A: Depth and width required at the entrance to a harbour are more than those required in the channel. Reason R: The entrance to a harbour is usually more exposed to waves as compared to the harbour itself. Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Depth and width required at the entrance to a harbour are more than those required in the channel. Reason R: The entrance to a harbour is usually more exposed to waves as compared to the harbour itself. ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Assertion A: Basin walls have to be of much greater height than dock walls. Reason R: Tidal basins are subject to fluctuations of levels due to tidal variations Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Basin walls have to be of much greater height than dock walls. Reason R: Tidal basins are subject to fluctuations of levels due to tidal variations Select your answer based on the coding system given below: (A ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is the correct explanation of A

Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on the coding system given below: (A) Both A and R is true and R is correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is correct explanation of A

Assertion (A): Activity 57 is critical. Reason (R): Earliest finish time and latest finish time for events 57 are same Select the correct answer. (A) A is correct but R is not correct (B) R is correct but A is not correct (C) Both A and R is correct (D) Both A and R is incorrect

Description : Assertion (A): Activity 57 is critical. Reason (R): Earliest finish time and latest finish time for events 57 are same Select the correct answer. (A) A is correct but R is not correct (B) R is correct but A is not correct (C) Both A and R is correct (D) Both A and R is incorrect

Last Answer : (A) A is correct but R is not correct

The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) Bottom face perpendicular to the wall The correct answer is (A) Only (ii) is correct (B) (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Description : The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on (i) Top face parallel to the wall (ii) Top face perpendicular to the wall (iii) Bottom face parallel to the wall (iv) ... (i) and (ii) are correct (C) (iii) and (iv) are correct (D) Only (iv) is correct

Last Answer : Answer: Option D

Assertion A : The load factor for live load is greater than that for dead load. Reason R : The live loads are more uncertain than dead loads. Select your answer based on the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : The load factor for live load is greater than that for dead load. Reason R : The live loads are more uncertain than dead loads. Select your answer based on the coding system given below: (A) Both A ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Assertion A : Paints with white lead base are not recommended for painting of iron works. Reason R : Paints with white lead base do not check rusting of iron. Select your answer according to the coding system given below: (A) Both A and R is true and, R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Paints with white lead base are not recommended for painting of iron works. Reason R : Paints with white lead base do not check rusting of iron. Select your answer according to the coding system given below: ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Assertion A : Normally turpentine oil is recommended as thinner for indoor painting. Reason R : Turpentine oil is costlier than other thinners. Select your answer according to the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Normally turpentine oil is recommended as thinner for indoor painting. Reason R : Turpentine oil is costlier than other thinners. Select your answer according to the coding system given below: (A) Both A and R is ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option B

Assertion A : Pure lime takes a long time to develop adequate strength. Reason R : Pure lime has slow hardening characteristics. Select your answer according to the coding system given below: (A) Both A and R is true and R is correct explanation of A (B) Both A and R is true and R is not a correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Pure lime takes a long time to develop adequate strength. Reason R : Pure lime has slow hardening characteristics. Select your answer according to the coding system given below: (A) Both A and R is true ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below: (A) Both A and R is true and R is the correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A : Shishum is used for decorative woodwork. Reason R : Shishum can be polished to an excellent finish. Select your answer according to the coding system given below: (A) Both A and R is true and R is the ... explanation of A (C) A is true but R is false (D) A is false but R is true

Last Answer : Answer: Option A

R, an assessee carries on business in respect of which it holds tenancy rights. It carries out improvements to the said building at a cost of Rs. 2 lakhs and claims depreciation @ 10% thereon. Which one of the following is the correct answer? a) No depreciation will be available, on the grounds that the assessee is not the owner of the building b) Depreciation will be allowed of Rs.20 thousand c) Deduction will be allowed of Rs. 2 Lakh d) The amount of Rs.2.2 lakh will be capitalized

Description : R, an assessee carries on business in respect of which it holds tenancy rights. It carries out improvements to the said building at a cost of Rs. 2 lakhs and claims depreciation @ 10% thereon. Which one of ... Deduction will be allowed of Rs. 2 Lakh d) The amount of Rs.2.2 lakh will be capitalized

Last Answer : b) Depreciation will be allowed of Rs.20 thousand

Match List I (Industries) with List II (Important Centers) and select the correct answer using the code given below : L i st I L i st I I (I n dust r i es) (I m por t an t Cent er s) A. Cotton textile I. Ludhiana B. Hosiery II. Rishra C. Jute III. Coimbatore D. Silk textile IV. Mysuru (1) A-I, B-III, C-IV, D-II (2) A-IV, B-I, C-II, D-III (3) A-III, B-II, C-I, D-IV (4) A-III, B-I, C-II, D-IV

Description : Match List I (Industries) with List II (Important Centers) and select the correct answer using the code given below : L i st I L i st I I (I n dust r i es) (I m por t an t Cent er s) A. Cotton textile I. Ludhiana B. Hosiery II. ... I, C-II, D-III (3) A-III, B-II, C-I, D-IV (4) A-III, B-I, C-II, D-IV

Last Answer : (4) A-III, B-I, C-II, D-IV